Provision of decorative lighting arrangement along with its allied accessories in Vishal Enclave Block A and B Parks in Ward 94 Raghubir Nagar under West Zone MCD. NIT No.52 Item No.02

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.lKV grade conforming to IS- 7098 of following size:- (a) 2x6 sqmm

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 1.5 sq. mm

Supply and creation of architectural column light pole made of mild steel with overall height of not less than 4.0 mtr. Duly finished with four coats of protection coating viz etch primer, Epoxy primers, poly urethane and and glass clear respective (each coating should not be having on an average thickness of 65 micron), Light column in square cross section 220mm x 220mm made of mild steel housing components in square cross section having minimum weight 120 kg. Including a laser profile jail patten (`~1.5m ht of MS laser cut sheet), gladded with opal acrylic diffuser 4 x 36 Watt LED source and additional 4 nos, 9-12W LED each post-top Black in colour coated for high corrosion resistance silicone gasket, SS fasteners, foundation bolt of size 20 mm x 600 mm (N.S) - 04 nos. & foundation base plate of size (N.S) 325 mm x120 mm (LXWXH)-01 no. and integral driver , IP 65,IK >07 for the complete light fixture including non- metallic portion ; and installation accessories. 360 deg light distribution in the column part provided in low glare Indirect line of vision Efficacy > 85 % THD>10% PFO.9, Surge protection>$ KV. CCT 3000K CRI >70,SDCM<4 & IK >07 ; Life of LED - 50000 burning hours, suitable size of service windfow having prewire earth connection, Integral junction chamber for cable termination i/c providing and fixing 4 way 32 Amp SPMCB, 10KA"C" curve including making connections testing on load complete etc. as required.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil