Repair/Replacement Of Aluminum Window/Joinery With Granite Cell And Jambs Including Floor And Vertical Surface/Column Under The AOR Of DIPAC UNDER AGE (I) (U) B/R DELHI CANTT-10

Amount

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar and disposing the rubbish Out of Defence land complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering in cement mortar (1:4) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for finishing new wall surface with Acrylic smooth exterior paint of required shade (Two or more more coat applied @ 1.67 Ltr/ 10Sqm over and including priming coat of exterior primer applied @2.20 Kg/ 10Sqm) complete all as specified and as directed by Engineer-in-Charge.

M&L for 10mm thick rendering in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar (1:3) finished even & smooth without using extra cement on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper oil emulsion over 2mm thick plaster of paris complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper oil emulsion over 2mm thick plaster of paris putty complete all as specified and as directed by Engineer-in-Charge.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and demolition complete all as specified and as directed by Engineer-in-Charge.

Dismantling of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge.

M&L for brickwork with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

M&L for brick work with sub class except "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) but excepts bricks complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M but with shutters (without taking off shutters from the frame)

Taking down chowkhats or frames n. exc 1.5 sq. M but with shutters (without taking off shutters from the frame)

S&F of 12mm thick glass door (tuffen glass), frosted with Unit logo in full glass, fixed with, fixed on floor spring with two nos stainless steel handle on each leaf n exc 45 cm long and 25 mm thick including necessary provision to Godrej lock the door, complete all as specified and as directed by Engineer-in-Charge. (Note:- Floor spring will be paid separately).

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge.

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F of 100 mm size SS butt hinges, medium weight (including fixing with nails or welded as required) complete all as specified and as directed by Engineer-in-Charge.

S&F of 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F of 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-Charge.

S&F of 200 mm Aluminium anodised,barrel tower bolts of ex truded section and fixed complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding/partition any thickness and description, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F of powder coated aluminium frame (powder coated) for doors, windows, ventilators or Aluminium Partition with one or more rebates including joining cletas for fixing complete all as specified and as directed by Engineer-in-Charge.(Note: Colour coating shall be approved by Engineer-in-Charge)

S&F of alminium anodized powder coated door shutters, aluminium section weighing 0.55Kg/m, including joining cletas, glazing/glazing clips, rubbers neoprene packing, handles 2 No's each door, hinges, anodised aluminium snap beading, screws, mortice lock 01 Nos etc. complete all as specified. (Note: Colour coating shall be approved by Engineer-in-Charge)

S&F of anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws aluminum poder coated tower bolt 02 Nos/ Each shutter etc. complete all as specified (Note: Colour coating shall be approved by Engineer-in-Charge)

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, for aluminium door frame/ aluminium partition complete all as specified and as directed by Engineer-in-Charge.

S&F of powder coated aluminium three track sliding windows with three sliding shutters (one gauzed shutter including 0.36mm dia and 1.18mm aperture stainless steel wire mesh and two glazed shutter including 4 mm thick plane glass panes) made of aluminium sections not less than 1.1kg per meter for bottom and top tracks, side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading, channel, gasket, nylon rollers, Maruthi lock with handles etc complete all as specified and directed by Engineer-in-Charge.

S&F for anodised aluminium grill (anodised transparent or dyed to required shade according ti IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per reuirement and direction of Engr-in-charge. (Note: Colour coating shall be approved by Engineer-in-Charge)

S&F in repair aluminum extruded Section door closer hydraulically requalated designation No. 3 universal type, sutiable for door shutters of 851 to 1000 mm in width and of weight not more than 35 Kg and fixed omplete all as specified and as directed by Engineer-in-Charge.

S&F in repair extruded aluminium alloy handles 150mm long fabricated type anodised for flush doors or skeleton doors or panelled doors complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MS butt hinges medium weight 100mm long fixed to all types of doors complete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium anodised, barrel tower bolts 150mm long of extruded section and fixed to doors complete all as specified and as directed by Engineer-in-Charge.

M&L for easying door shutter of any description exc 1 sqm but n exc 2 sqm of any description incl taking down shutter and refixing in the same opening after rectifying all defects in the shutter, oiling / servicing of floor spring, hydraulic door closer, tightening all loose screws, cleats, etc replacing all rubber gaskets/aluminium beading complete all as specified and directed. Note: The minor parts such as screws, cleats, oil, rubber gasket, aluminium beading etc shall deemed to be including in quoted rate.

S&F of 4.80mm thick sheet glass/tinted/frosted ordinary quality in square exc 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting/AC/ Fibre reinforced, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spd and directed by Engineer-in-Charge.

S&F of framed work such as grills, grating, steel ladder, iron gate and doors framed and hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc complete all as specified and directed by Engineer-in-Charge.

S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F Venetian Blinds of superior quality fabric (as approved by the AGE (I)), horizontal/vertical type, with 100mm wide louvers, including supplying and fixing of all arrangements required for proper functioning of the blinds such as aluminium top & bottom guide rails, rollers, chain etc., including taking down of old unserviceable venetian blinds, complete all as specified and directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing), removing tiles and rubbish off the premises (out of Defence land) complete all as specified and as directed by Engineer-in-Charge.

M&L for vitrified ceramic light coloured tiles 10 mm thick (square/rectangular) area of each tile n.exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L in repair of Antistatic false flooring (raised access floor) Panels comprising of nominal 600mm (30 to 35mm thick) modular panels (USF 1000 HPL finish Panel 600 x 600 x 35mm) with heavy duty pedestals in Antistatic false flooring (raised access floor) system. (The total system weight shall not exceed 40 Kg/Sqm. The system shall be able to withstand a UDL of 2000 Kg/m2 and a point load of 450 Kg/m2.) complete all as specified and directed by Engineer-in-Charge.

Dismantling wall/celling board/ Aluminium Partition any thickness, including cover fillets complete all as specified and directed by the Engineer-in-Charge..

S&F of Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanger 4mm dia (upto 1200mm lenth)made out of GI flat 40x3mm size of 60cm long with expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed by Engineer-in-Charge.

M&L for HSPC non asbestos fibre cement building boards 4mm thick, preprimed, self embossed fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.

SARRAJ ENGINEERS AND CONTRACTORS (BID ID -3423827)

M/S MSD & Associate (BID ID -3431079)

B. S BUILDERS (BID ID -3423053)

MRITUNJYA ASSOCIATES (BID ID -3432285)