Special Repair Electrical Work in Kothi No.-22 and 27/1 at Canal Colony.

Amount

Wiring point for Fan/Fresh air fan (light duty exhaust fan) in PVC conduit with 1.5 Sq.mm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit.

Wiring point for plug in PVC conduit with 1.5 Sq.mm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit.

Add for plug point with modular switch & socket in place of piano type switch & socket.

Wiring point for Call Bell in PVC conduit with 1.5 Sq.mm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit.

Add for Call bell point with modular type bell push in place of piano type bell push.

Wiring point for light in PVC conduit with 1.5 Sq.mm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside.

Add for light/fan points with modular type switch in place of piano type switch.

Add for Invertor wiring in wiring point for light/fan/plug with 1.5mm copper wire.

Supply and Fixing of power plug with 15A/250 Volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M. S. box of 175mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and Fixing and concealing of 25mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer-in-charge.

Supply and Fixing of 2/3/4 ways round steel junction box confirming to ISS for 25mm dia 2 mm thick PVC conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover, screwed as directed at site by the Engineer I/C with supply of all material labour and T&P required for proper completion of work.

Supply and Fixing of switch box made up of 16 SWG (1.5 mm) thick M.S.Sheet of 175x100x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer-in-charge.

Supply and Fixing of switch box made up of 16 SWG (1.5 mm) thick M.S.Sheet of 200x250x65 mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer-in-charge.

Supply and Fixing surface/flush mounting 4 ways TPN distribution board (Legrand Lexic) without MCB with additional metal door complete in all respect as directed at site by Engineer-in-charge.

Supply and Fixing 6 Amp. to 32 Amp. SPMCB(10KA) (Legrand Lexic)

Supply and Fixing surface/flush mounting 12 ways TPN distribution board without additional metal door complete in all respect, as directed at site by Engineer-in-charge.

S&F of 63 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect.

Supply and Fixing of electronic fan dimmer (Modular) 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply & Fixing of 63 Amp. 4 Pole Isolator(Legrand Lexic)

Supply and laying of 10 Sqmm 4 core cable aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below grond level over a cushion of 75mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-in--charge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and Fixing of recess/surface mounting round 24 to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/Reflector and driver set complete in all respect.

S&F of 32 Amp. 415 Volt Metal Clad T.P.N rewireable type switch fuse unit on angle Iron bracket complete in all respect.

Supply and burying earth for lighting conductor of 900mmx900mmx3mm copper plate vertically with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30Cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mmm thick alround etc. as per directions of Engineer-in-charge complete in all respect.

m/s zaheer construction