Vellore District Strengthening of Road from CC Road to Edigai Thoppu At Nelvoy Panchayat Km 0/0-1/000(R10) Package No 5

Amount

Strengthening of Road from CC Road to Edigai Thoppu @ Nelvoy Panchayat Km 0/0-1/000(R10)

Clearingthe Scrub jungle including cutting the scrubs and removing away from site etc.complete

Picking the existing wornout BT surface to 5-10 cm thick including all labour charges etc complete (Km 0/0-1/000)

collection and supply of carted earth from approved quarry an average lead 1km including cost and conveyance of all materials to site anf labour charges etc.

Earth work excavation and depositing on bank with initial lead of 10m initial lift of 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 A

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it.

Applying tackcoat over BT Surface using 2.5kgs of bitumen emulsion RS-1 per 10sqm including cost of bitumen emulsion which will be supplied deparmentallyat section stores cost of which will be recovered at the issue rate as per the special condation for etc Complete

Providing and laying Premix Carpet with Seal Coat Type -A to 20mm thick using 0.18cum of 13.2mm, 0.09 cum of 11.20mm and .09cum of 6.70mm with 23.232 Kgs of VG 30 Bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in Central Hot Mix Plant 20-30T capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 20mm with mechanical paver to the specified grades and cross section and consolidated by 8-10T vibratory/pneumatic roller to the required density etc., including labour for attending to paver to site, hire & fuel charges for 20-30T CMP with bitumen boiler, tipper trucks, paver finisher, vibratory/pneumatic roller and all other tools and plants required, including fuel and other incidental charges etc., complete .(PCSC with Paver(VR)(Plastic Waste)

Road Marking with hot applied thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface including all cost and Convenyance for etc Complete

Construction of 1.5m RCC Slab Culvert @CH 0/0

Earth work excavation and depositing on bank with initial lead of 10m initial lift of 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B

Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc. complete

Supplying and errecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.90 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with std. specification and as directed for the following items

Below Ground level

Above Ground level

Plain Cement Concrete 1:3:6 mix using 40 mm ISS sine HBG metal including cost and conveyance of all materials and all labour charges etc complete.

Plain Cement Concrete 1:2:4 mix using 20 mm ISS sine HBG metal including cost and conveyance of all materials and all labour charges etc complete.

Supply and fabrication of steel for RCC items including cost and conveyance of binding wire,etc.,complete

RCC 1:1.5:3 Mix using 20mm ISS Sine HBG metal including cost and conveyace of all material and all labour charges,etc.,

Construction of 1.5m RCC Slab Culvert @CH 0/550

Earth work excavation and depositing on bank with initial lead of 10m initial lift of 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B

Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc. complete

Supplying and errecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.90 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with std. specification and as directed for the following items

Below Ground level

Above Ground level

Plain Cement Concrete 1:3:6 mix using 40 mm ISS sine HBG metal including cost and conveyance of all materials and all labour charges etc complete.

Plain Cement Concrete 1:2:4 mix using 20 mm ISS sine HBG metal including cost and conveyance of all materials and all labour charges etc complete.

Supply and fabrication of steel for RCC items including cost and conveyance of binding wire,etc.,complete

RCC 1:1.5:3 Mix using 20mm ISS Sine HBG metal including cost and conveyace of all material and all labour charges,etc.,

Construction of Retaining wall @ CH 0/0 to 0/050

Earth work excavation and depositing on bank with initial lead of 10m initial lift of 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B

Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc. complete

Supplying and errecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.90 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with std. specification and as directed for the following items

Below Ground level

Above Ground level

Plain Cement Concrete 1:3:6 mix using 40 mm ISS sine HBG metal including cost and conveyance of all materials and all labour charges etc complete.

Plastering with cement mortar 1:4 mix to 20 mm thick including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc. complete

Provision for Hectometer Stone

Provision for Kilometer Stone

Provision for Sign board charges

Provision for Name Board

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

s&s constrctions