Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC 10 RAJAN KUNJ ROORKEE ROAD MEERUT UP PIN 250110 | MEERUT | UTTAR PRADESH | 250110 | L1 | Accepted-AOC Being L1 accepted | |
| 2 | L2₹28.0 L+₹1.6 L (6.10%)Rejected-Finance 56 LALKURTI BARA BAZAR MEERUT CANTT UP 250001 | MEERUT | UTTAR PRADESH | 250001 | L2 | Rejected-Finance Rejected due to not being L1 | |
| 3 | L3₹30.0 L+₹3.6 L (13.5%)Rejected-Finance 96 4 PHOOL BAGH COLONY MEERUT 250002 | MEERUT | UTTAR PRADESH | 250002 | L3 | Rejected-Finance Rejected due to not being L1 | |
| 4 | L4₹30.5 L+₹4.1 L (15.5%)Rejected-Finance | L4 | Rejected-Finance Rejected due to not being L1 | |
| 5 | L5₹31.1 L+₹4.7 L (17.6%)Rejected-Finance C 92 JAIN NAGAR RAILWAY ROAD MEERUT UP | L5 | Rejected-Finance Rejected due to not being L1 |
Tender Value
₹32.9 L
EMD Value
₹65,740
Closing Date
22 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Meerut Cantt
Garrison Engineer (South) Meerut Cantt The Mall Road Meerut Cantt Distt Meerut-250001(UP)
PROVN OF SEPTIC TANK WITH SOAK WELL FOR THE OR TOILET OF 509 ASC BN AND PROVN OF COVERED SENTRY POST AT NEW KLP 522 ASC BN UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT
2023_MES_615492_1
GE/MRT/S/8085/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Meerut Cantt
Please refer Tender documents.
12 documents required · 12 mandatory
₹500
GE (South) Meerut
₹65,740
Yes
20 Oct 2023
24 Aug 2023
25 Sept 2023
25 Aug 2023
22 Sept 2023
8 Sept 2023
Amount
M&L for construction of septic tank of 100 users with sludge chamber including necessary earth work in any type of soil (soft/loose/hard/dense). Complete all as specified in CEBZ drawing No. TD/217, sheet No. 1/7 to 7/7 and as directed .
M&L for construction of soakage well of size 3m dia x 4.5m (effective) depth including necessary earth work in any type of soil (soft/loose/hard/dense). Complete all as specified in CEBZ drawing No. TD/309, sheet No. 1/4 to 4/4 and as directed..
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.
Returning filling in incl spreading, leveling watering and well ramming in layers n.exc 25 cm. Complete all as specified and directed.
Removing excavated soil to a distance n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point. Complete all as specified and directed.
M& L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.
M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.
M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.
M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates) as in cover slab or similar works set & jointed in CM 1:4 complete all as specified and directed. Note :- Reinforcement shall be measured & paid separately under respective item of Sch 'A'
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 3% complete all as specified and directed. Note:- water proofing compound will be measured and paid seperately.
M&L for concrete bed in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe complete all as specified and directed.
M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.
M&L coloured chequred cement concrete tiles 30cm x 30cm x 25mm thick set joined and pointed in neat cement slurry in floors with grey and pigments laid over and including Screed bed 15 mm thick in CM 1:4 for Laying floor finishes complete all as specified and directed.
Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
M&L laying hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.
M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 on ceiling complete all as specified and directed.
.M&L PCC (1:4:8) type D-2, 100 mm thick (using 40 mm graded stone agg) as sub base complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
All as per Item No 21 here-in-before but 6 to 8 mm dia complete all as specified and directed.
All as per Item No 21 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders complete all as specified and directed.
M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.
M&L for formwork to Edges of concrete flats, concrete railings and roofs n exc 20cm wide and sides of RCC band in walls, sloping and similar work for rough finished surfaces of concrete flat. Complete all as specified and directed.
S&F mild steel Angle iron, flat iron, plates, square/round bars etc including cutting tops to shape as directed, drilling holes, notching for wire, etc, as in stair case ledder, gates including sheet etc and like including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed.
M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate,complete all as specified and directed.
M&L for 20 mm thick screed bed in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 200ml per 50 Kg weight of cement consumed or as per manufacturers instructions complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately under "Supply only" item of Sch 'A".
Supply only liquied water proofing compound. Complete all as specified and directed.
M&L for applying two coats of OBD over a coat of primer on newly plastered surfaces of Brick or concrete wall surface including preparation of surface. Complete all as specified and directed.
M&L for applying two coats of cement based paint including preparation on newly plastered surface. Complete all as specified and directed.
M&L for applying three coats of white wash on new Ceiling surface including preparation of surface. Complete all as specified and directed.
Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and including PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following :- One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.
All as per item No 36.00 above, but One ceiling fan / exhaust fan point controlled by one, one way switch 05 / 06 Amps.
All as per item No 36.00 above, but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.
All as per serial item No 36.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.
Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.
Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.
Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.
Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed. .
Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. Complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200 mm sweep. minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC) complete all as specified and directed.
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated . Complete all as specified and directed.
Supply & fixing MCB SPN, AC, 240 volts of 32 Amps, C curve, 10 kA, complete all as specified and directed.
Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed.
Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty. Complete all as specified and directed.
M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.
Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.
Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
Supply and fixing LED building security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified and directed.
M/S AGARWAL CONSTRUCTION CO.
Tayal Builders
High Tech Metal India
Rajneesh Jain
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .