SPECIAL REPAIR TO GUARD POST NO 8, 9, 11, 20 21 ( BLDG NO P-279, P-280,P-282,P-283, P-1072) AND SPECIAL REPAIR TO BATHROOMS AND TOILETS OF OTM ACCN BLDG NO P-1553 SM BARRACK NO C D AT MILITARY STATION,JAISALMER UNDER GE (A) JAISALMER.

Amount

Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm but with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

S&F Solid pvc Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , suppling & fixing as per specification and drawing complete all as specified and directed by Engineer-in-Charge

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Ztop & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Taking down of shutter in any descreption but exc 1 sqm and not exc 2 sqm complete all as specified and directed.

S&F II class HW ,35mm thick glazed skelten shutters open rebated and prepared to receive glass gauze etc(with or without sash bar) edge of framing plain chamfered or rounded and fitted to chowkets as spceifed

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel all as directed by Engineer-in-Charge

S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded section all as specified & directed by Engineer-in-charge.

S & F in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified & directed by Engineer-in-charge.

S & F in repairs 150mm long aluminum anodised handles cast type complete all as specified and directed.

S&F 150 mm size extruded aluminium handle, fabricated type, anodiesed complete all as specified & directed by Engineer-in-charge.

S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F in repair, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F, 75mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S & F in repairs curtain drapery rod plastic coated fancy type 25mm dia od lentyhno exc 1.50 mtrs each fixed immdiate glbobe type clip powder coated fixed both ends including demolition of old pelmet boxes with rod in each all as specified and directed.

S&F in repairs 1st class hard wood small fittings such as brackets of any type, shaped door and window stops and the like, including all necessary labours articles n exc 200 cu. cm each complete all as specified and directed.

Repairs to steel windows or ventilators of any description including necessary welding , glazing putty, peg stay, hinges, steel tower bolts, handles etc complete upto functional condition all as specified and directed.

Hacking out old broken glass any thickness size qulaity or description from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick frosted glass and glazing with oil putty in square not exceeding 0.5 sqm in each pane all as specified and directed.

S & F in repairs steel window handle left / right fixed complete all as specified and directed.

M&L for welding in repairs n exc 2.50 cm in length, thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and directed.

All as per item No 24 above but exc 2.50 cm and n exc 5 cm in length complete all as specified and directed by Engineer-in-Charge.

S&F in repairs box type hinges for steel window including taking down old project type hinges and necessary welding and making the window functional complete all as specified and directed.

S&F in repairs steel window peg stay complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 but n exc 4 sqm but with shutters (without taking off shutters from the frames) and refixing in same opening.

S&F Pressed steel frames size 105 x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complate as specified

M&L of Plywood 12 mm thick, grade BWR type BB fixed with screwa to timber frame work complete all as specified and directed by Engineer-in-Charge.

Taking down plastering of any description and in any position in cement mortor on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for plastering in CM 1:4 , 15 mm thick incl water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed (WPC will be measured and paid for separately) .

M & L for plastering 5mm in CM 1:3 on ceiling / chajja faces finished even and smooth without using extra cement complete all as specified and directed.

M & L for plastering in CM 1:6 , 15 mm thick on internal face of wall finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete.

M & L for Cement concrete 1:3:6 type C-2 ( using 40 mm graded stone aggregate ) 75 mm thick finished even and smooth without using extra cement complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement morter bedding (but not backing), debries and rubbish off the premises.

M&L for non skid ceramic Joint less (vertical joints) coloured tiles 10mm area of each tile exc 0.18sqm but not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed

M&L for non skid ceramic coloured tiles of size 300x 300 by 7mm thick joint free grade B-II (a) superior quality confirming to IS 13755 as in floors set & jointed in neat cement slurry and pointed in coloured cement to match the tiles and including scread bed or bedding layer 15mm thick in CM 1:4 all as specified.

M&L glazed colour ceramic tiles(joint less) in of size 350 x 250x 7mm /450X350X7mm thick as in dado including all round border tiles pattern and print as approved and width of border tiles not less then 75mm including screed bed or bedding layer 10mm thick in CM 1:4 all as specified.

S&F in cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls of 100mm dia including dismantling of existing CI pipes

All as per sl item No 41 above but 75mm dia ncluding dismantling of existing CI pipes.

S&F in repairs cast iron bends (any radius), diminishing pieces or tapers (Larger bore measured) of 100mm dia.

All as per sl item No 43 above but 75mm dia of pipe.

S&F in repairs 100 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door complete all as specified and directed.

S&F in repairs 75mm dia CI cowls all as specified and directed.

S&F in repairs 100mm dia CI cowls all as specified and directed.

S&F in repairs 75 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store complete of 15mm bore pipe all as specified and directed.

All as per item No 49 above but 20mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade 15mm bore complete all as specified and directed.

Refixing old GI connections in new or old postion (wall,ceiling , floors etc) 15 mm bore of pipe

S & F 20mm bore GI tubing medium grade fixed complete to walls and ceiling or laid in floor complete all as specified and directed..

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc. ) 20mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in , making good to facings for concealed water tubing and pointing in CM 1:3, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge.

S & F in repairs bib taps (two way) fancy type chromium plated screwed for iron pipe of 15mm bore complete all as specified and directed..

S&Fin repairs PVC waste pipe 32mm dia 600mm long complete all as specified and directed.

S & F in repairs brass chromium plated concealed Angular stop cock with flange for 15mm bore GI tubing complete all as specified and directed.

S&F in repairs wash hand basins, vitreous china, of size 630x450mm (flat back, or angle back type) including CP waist coupling , cutting for and pinning in ends of brackets or erecting stand but excluding taps, waist pipe , chain and plug and procelain stopper complete all as specified and directed.

S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed

S & F in repairs Vitreous china urinal, bowl type white (minimum), with grating and union for discharge pipe

S & F in repair Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP brass soap dish fancy type complete all as specified and directed.

S&F in repairs CP brass glass shelves 550mm long with brackets complete all as specified and directed.

Supply only integral water proofing compound.

S & F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed .

S&F in repairs 15mm bore PVC connection 450mm long with brass coupling at both ends complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, excluding flushing cistern, flush pipe etc but including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel as fixed.

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer complete all as specified and directed.

S&F in repair CP shower rose 125mm size with arm with bend of 45 degree with flange of fixed in repairs complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap75mm, with grating including jointing with solvent cement complete all as specified and directed..

S&F in repairs PVC muilti floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges complete all as specified and directed.

Dismentling of existing RCC work as in chajjas ,tins facies,prapets,roof projection etc at any height ,up to 300 mm wide and incl all necessary form work and making good the dismantled portion in PCC ,1:2:4 type B1 using 20 mm graded aggregete and making the surface smooth complete any thickness of RCC work ,the rate should be deemed to be inclusive of scaffolding, formwork and work to be carried out at any height. Note :-reinforcemrnt should pay and measurment seperatly.

Demolition of cement concrete (reinforced) in roof,roof projection,chajja and similer works in any position.

M&L for Renforcement cement concrete nominal mix 1:2:4 type B 0 using12.5 mm graded stone aggregate for chajja,roof projection,facies and similar works all as specified & directed by Engineer-in-charge.

Formwork to chajjas ,roof projection and similar work including edges including height upto 6 mtr.

M&L TMT bars cut to length and bend to shape, 6 to 8mm dia including binding etc complete

M& L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L preparation of newly wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of pink/white primer all as specified and directed.

M& L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M& L for preparing of newly plastered surfaces of wall and applying two coats of cement base paint (camouflage pattern )on walls including in narrow width, bands, cornices, pilasters etc and cracked filled with putty/cement motar and match the existing surface complete all as specified and as directed (Note:camouflage pattern as per approved by GE ).

M& L preparation of old decorated surfaces and applying one coat of cement base paint (camouflage pattern )on walls including in narrow width, bands, cornices, pilasters etc and cracked filled with putty/cement motar and match the existing surface complete all as specified and as directed (Note:camouflage pattern as per approved by GE )

M & L for preparation of old plastered surfaces of walls and applying one coat of white wash including in narrow width, bands, cornices, pilasters etc.and cracked filled with putty and match the existing surfacecomplete all as specified and as directed complete all as specified and directed.

M & L for preparing new /old plastered surfaces and applying two coats of oil bound distemper over one coat of primer wall putty including preparatory to distempering on surface of walls

M&L for preparing old painted steel surfaces and applying one coat synthetic enamel paint complete all as specified and directed.

M & L preparation of old wood surfaces of any description over 10cm in girth or width & applying one coats of synthetic enamel paint complete all as specified and directed.

M & Lfor preparing old surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

S & F Rototional mould ed polythylene water stage tankswhite 500 ltr (cylidrical verticial with closed top) hoisted and fixed in postion including float valve high pressure epoxy coated aluminium rod & plastic ball 20 mm dia including dismantling of existing water tank complete.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate all as specified and directed by Engr in Charge.

M&L for spreading of 25mm thick layer of sand cushioning all as specified and directed by Engr in Charge.

M&L Machine pressed precast concrete interlocking paver block glossy finish with grey cement and pigment any shape,colour and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified.(colour ,shade & pattern shall be approved by the GE)

M&L for PCC 1:2:4 type B0 using 20mm graded aggregates as in copings, kneelers, apex stones, bed plates, kerbs not provided for,water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed incl use and waste of form work.

M&L PCC 1:3:6 type C 1 using 20 mm graded stone aggregate in coping and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete.

M&L providing precast cement concrete type B1 1:2:4 (20mm graded stone agg) in cover slabs necessary use and waste of form work for fair faces of concrete and set in CM 1:6 complete.

S & F mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

M&L PCC1:2: 4 type B1 using 20 mm graded stone aggregate in Roof ,chajja,roof projection water throught etc surfaces of concrete smooth with out using extra cement with added water proofing compound including prepartion of surfaces and demolisation of loose plaster/conctete complete all as specified and directed .

M&L PCC 1:4:8 type D 2 using 40 mm graded stone aggregate in foundation and mass concrete/filling, complete all as specified and directed by Engineer-in-Charge.

Pre-cast cement concrete block masonry Type C1 1:3:6 (20 mm graded aggregate) Set in cement mortar 1:4 with solid blocks, exc. 10 cm in width and setting in mortar including demolition of existing block wall masonery complete

Material and labour for applying cold bituminous primer @ 0.30 ltr/Sqm confirming to IS-3384 and laying APP polymer modified membrane non-woven polyester reinforcement of 3mm thick, weighing not less than 3.5 Kg/Sqm with plain polythene finish and sealing all the over laps of 75mm in length side and 100mm on the width side of membrane by torching the same all as per manufactures instructions and all as specified and directed. Including removing existing unserviceable water proofing treatment and washing down with water to remove all dirt etc. also including 50 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floors, roof padding & finished the surface even & fair without using extra cement including approved water proofing compound as per manufacturer's instructions or by 3% of weight of cement all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in flooring complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic Joint less (vertical joints) coloured tiles 10mm area of each tile exc 0.11sqm but not exc 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed

M&L for rendering 15mm thick on stone wall surfaces in cement mortor 1:6 ,finished even and smooth without using extra cement complete all as specified.

S&F Aluminium anodised butt hinges 125mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type 15 mm dia fixed in repairs.

S&F in repair stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed in repairs.(Make:-Prayag Cat part No PIS 26 and eqvelient)

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete fixed in repairs.(Make:-Cera Cat part No B1010102, Hindware (Sleek) , Commander(Water Bird)

S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixed in repairs

S&F CP in repair grating for Nahani trap and floor trap of size 100 mm dia fixed in repairs (Make-Silver Shine ,Prayag

S&F in repair 700 x 500 mm 5 mm thick glass mirror with double coat for protaction and longevity grounded edges for safety and siliver plating on the back for better reflection all as specified.(Make:-Prayag Cat part No BLM-01,Cera Cat part No B3510112)

Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs. (Make:-Cera Cat No S3010102 , Hindware Cat part No - 20042)

S&F Oval type wash hand basin vitereous china flat back white incl CP waste coupling waste pipe brackets complete fixed in repairs.

S & F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old PVC tank with ball valve complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut screwed for iron pipe complete.

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repair.

S & F for cast copper chromium plated stop valves concealed type of cast copper alloy, screwde down high pressure screwde both ends for iron pipe of bore 15mm.

S&F vitreous china urinal , half stall type , white, excluding flushing cistern , flush pipe but including CP waste fitting 32mm bore and PVC waste pipe and fixed complete all as specified and as directed by the Engineer in Charge.

M&L for granite of any type slab 18mm thick machine cut bedded and jointed with grey cememt slurry and pointed with white cement with admixture of gigment to match the shde of granite stone including nosing, grinding and plishing complte all as specified and directed incl 15mm thick screeeding bedding in 1:6

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified & directed by Engineer-in-charge.

S & F Steel windows with side hung sgutters uncluding projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded.

All as per item above but without glazing bars complete all as specified and directed by Engineer-in-Charge.

S & F Steel Ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed by Engineer-in-Charge.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not other wise described, over 10cm width or girth including preparation of surfaces.

Resecuring or easing and adjusting shutters of any description exc 1 Sqm and not exc 3 Sqm each without taking down of sutters.

S&F in repair steel window handle left and right complete fitting complete all as specified and directed by Engineer-in-Charge.

S&Fin repair steel window stopper peg stay complete.

S&Fof mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&Fin repair mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&Fof 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&Fin repair 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt all as specified.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt all as specified.

Dismantling of CI/PVC soil , rain water pipe, cast and vent pipes of any dia, any pattern including all fitting, bore pipe 100mm

Ditto all as per item above here in before but bore of pipe 75mm

M&L 75mm dia cost iron floor trap,with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) including CP Grating.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through and including heavy duty ISI marked PVC concealed conduit alongwith its accessories of suitable size, with GI sunken boxes of 1.2 mm thick, 60 mm depth of suitable size including fixing/ grouting sunken as per site requirement and making good to match with existing finishes including provision of cover with white colour hylum sheet of 3.0 mm thickness switches/ sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following :

(a) One light point controlled by one, one way switch

(b) One FAN POINT controlled by one , one way switch and fan regulator

(c) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

(d) One three pin 5 Amps socket outlet point controlled by one No one way switch on independant board

All as per Item above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S&F for Switch piano flush type single pole one way, and 6 amp complete ISI mark complete all as specified.

S&F for Socket outlet multipurpose having provision for 2 in 1, 3 pin 5 amp piano flush type complete all as specified

S & F for Switch piano flush type single pole one way, and 15 amp complete ISI marked complete all as specified.

S&F for socket outlet 2 in 1, 2/3 pin 5 Amps and 15 Amps flush type complete all as specified.

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for stepped type fan regulator, Socket type, operating on 230 Volt 50 Hz complete all as specified.

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified.

S & F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 230 volt 50 Hz ACand making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .

S & F for MCB DB SPN 4 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 230 volt 50 Hz ACand making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .

S & F for MCB SPN rated capacity 40 amps, 230 volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA complete all as specified and as directed.

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete including taking down old unserviceble sub main wiring all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable and one run of conduit shall be paid as one unit length)

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make Orient, Philips, Crompton, Havells etc

S & F in repairs Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

S & F in repair bracket of GI pipe medium grade of 40 mm dia, 1.2 meter in Length clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers ,painting complete as specified.

Taking down ceiling fan / Exhaust fan of any sweep sealing cable end dismanting blade and removing fan and blade to store complete all as specified and as directed.

M & L for Painting of ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and as directed.

Fixing only Ceiling fan and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

M & L for making hole in wall suitable for fixing exhaust fan of 450 mm sweep and making good disturbed surface complete all as specified

Fixing Only Exhaust fan 450 mm sweep Heavy duty, metal body with louver, and all fixing arrangement 240 volt AC , Single Phase five Star rating complete all as specified Note: Exhaust fan will be issued in Sch B store free for Fixing Only.

Supply & fix LED flood light 150 Watt IP-65 with pre wired suitabke for sports lights and necessary mounting arrangements provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including removal of old unserviceable complete all as directed by Engineer-in-Charge Make Orient , Bajaj Crompton & philips etc

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 32 x 6mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

All as per Item above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC Cassing Capping including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete including taking down old unserviceble sub main wiring all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable and one run of conduit shall be paid as one unit length)

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F in repairs Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron strip 32 x 6mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

GEMRARAMCONTRACTOR

Dadhich Engineers

M/s Shri Inder Construction Company

Leelashah Enterprises