CONSTRUCTION OF JAYANTI DEVI PARK, MC Jind (recall)

Amount

Supply and erection of 65 Amp. 3 Phase automatic/ digital time switch of Indo Asian Make HSN code 8537 along with contactor of required capacity of Indo Asian Make

Providing and fixing of Acrylc Letters with ACP Channel with light (Raising 50mm ) of 8-10` Height with power Supply and Warrenty of 2 years with fittings complete with all respect.

SITC of fountain as per design feature and drawings, generally consisting of fountain jet nozzles of adjustable flows forming closed water veil ,complete item in all respects including pumps/motors , valves, conduits supply/delivery hoses , electric connections,controls,supply modules and underwater illumination as per approval of architect and engineer in charge.

Providing and fixing of stainless steel bollards of 10 gauge 304Q with 150mm dia x3mm thick , Patti 20mm x 4mm thick (3Nos) With Radium Patti, Bass Plate 250mmx250mmx4mm thick including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work

Supply and Errection of Decorative Pole with model no (VSTP-DP-13-40) of Height 4000mm complete in all respect up to the entire satisfaction of Engineer-in-charge of the work.

Supply and Errection of Decorative Post Top LED Luminaries with model no (VSTP-PT-33 B ) of 50 Wattage complete in all respect up to the entire satisfaction of Engineer-in-charge of the work.

Multi Play Station consisting of four nos. of platforms with designer canopies having appearance of 3.0 mtr. height made of 3 mm FRP each of minimum size 1.20 mtr. X 1.20 mtr. by four numbers of minimum 80 mm IDGI pipe `B-Class` made of 14 SWG CRC sheet with FRP non skid lamination/2.5 mm thick special perforated MS sheet duly supported underneath by angles of size 40 X 40 X 4 mm. Platform should be supported by railing made of 25 mm and 20 mm IDGI pipe `B-Class` horizontal as well as vertical members respectively. The vertical member should be at least 0.75 mtr. high and spaced at distance of 45 cm. There should be one spiral slide, one wave slide and one double wave slide connected with platform at height 1.5 mtr, 1.2 mtr., 1.2 mtr. and 1.2 mtr. respectively .....

Providing and fixing of Park Equipments Spring Rocker...

Providing and fixing of Park Equipments Spring See-Saw....

Providing and fixing of Park Equipments Doli- Fibre....

Providing and fixing of Park Equipments Chair Swing....

Providing and fixing of Park Equipments Spril Slide 10 ft....

Providing and fixing of Park Equipments Fun Station....

Providing and fixing of Park Equipments Straight Slide....

Providing and fixing of Park Equipments Double See-Saw....

Providing and fixing of Sky Walker equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe with 60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm.Allen Bolts are also used to tighten the closing cap.Closing cap of HDPE / PPCP Plastic is used. High quality rubber grip are also used for firm handling.The powder coating done with Pure polyester powder with 60 to 70 micron thickness....

Providing and fixing of Shoulder and Chest Press Combo made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.The handle frame is made of 42mm OD G.I. pipe.The remaining frame is made of 32mm OD G.I. pipe. Seating frame support of dimension 250 x 150 x 5mm is welded for supporting the pedal seat. MS Seat of size 380mm x 300mm x 5mm is used for supporting the foot. ?? 60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia ??225mm and 10mm thickness is welded at bottom....

providing and fixing of Foreman Ring Dual or Parallel Bar made up of 2inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Providing and fixing of Sit-up Bench Sit Up Board equipment made up of 42mm OD “B” class GI pipe: Prime Stand duly bend.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The powder coating done with Pure polyester powder with 60 to 70 micron thickness....

Providing and fixing of Leg Press Dual equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality. High quality rubber grip are also used for firm handling.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.......

Providing and fixing of Swing Dual/ Surf Board equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe. 60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.Foundation plate of dia 225mm and 10 mm thickness is welded at bottom. All welded joint are of good quality. High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness,.....

Providing and fixing of Leg Raise Bar/s Push Up Bars equipment made up of 4inch B class GI pipe: Prime Stand, Foundation center pipe.All welded joint are of good quality. High tensile steel with galvanized nut and bolts to be used.Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.....

Providing and fixing of Seated Rowing equipment made up of 3inch Bclass GI pipe: Prime Stand duly bend, Foundation center pipe.The pins used are made up of 25mm hardened bright bar.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High quality rubber grip are also used for firm handling.The bushes (Stopper) used to avoid the collision.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.....

Open Gym Equipment:- Providing and fixing of Eleptical Cross Trainer made up of 3inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 175mm and 10 mm thickness is welded at bottom.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. High quality rubber grip are also used for firm handling.The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Open Gym Equipment:- Providing and fixing of Double Twister/ Standing Twister equipment made up of 3inch B class GI pipe: Prime Stand duly, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Providing and fixing of cast iron gazebo of octagonal shape having dimension 18`x18`x14` with pole light 9` and upper roof height is 5` and length of each side is 7`4` of copper shade colour. The roof is waterproofed and made up of coloured steel profile sheet with 2 layer of coating i.e., 1st layer of ESDEE EPOXY chemical resistant and 2nd layer of ESEED HIGH quality paint complete in all respect up to the entire satisfaction of Engineer-in-charge of the work..

Bidder Name

Amount

Pardeep Contractor (GSTN-NA) BID ID -1245056