Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹2.8 L+₹6,452.40 (2.32%)Rejected-Finance GR 8 ADDA BUILDING 1ST FLOOR CITY CENTRE DURGAPUR 16 | DURGAPUR | PASCHIM BARDHAMAN | WEST BENGAL | L2 | Rejected-Finance stood L2 | |
| 3 | L3₹2.9 L+₹11,652.23 (4.19%)Rejected-Finance DVC PARA MEMARI PURBA BARDHAMAN | MEMARI | PURBA BARDHAMAN | WEST BENGAL | L3 | Rejected-Finance stood L3 |
| Sl No | Description | Qty | Unit | KOUSHIK MONDAL L3 | ADHISHARM INDUSTRIALS L1 | DURGAPUR POWER L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15AKit-Kat fuse unit,one NL on porcelain insulator etc . and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. 200 x 150 x 100mm | 1 | nos. | 550 ₹550 | 510 ₹510 Lowest | 525 ₹525 |
| 2.00 | Supply & Delivery of LED Sinage Board with liquid Acrlyic letters on ACP Board of 3 mm Thick ( Make - Aludecor/ Alstone) of size 12 ft. x 4 ft or other suitable size to accommodate all the matters / contains as approved by the authority to be made with 25 x25 x 4 mm M.S angle Iron, 18 S.W. G squrae/ Round Hollow bar , Base plate (10mm Thickness) required for fixing the necessary Nuts , Bolts , Washers , supporting angle Iron , Clamp etc. and ACP Sheet on all sides to be moulded unifornmly, Side fabricated by Aluminium 'L' Channel , upon which elevated or box type letter made from imported liquid acrylic will be fixed. The Back Side of the letters is covered by 3 mm thick ACP (Make- Aludecor/Alstone) or Branded WPC Board.Letter should be 6mm thickness 3mm outside and 3mm inside of the ACP board. The inside of the letter Supplying and Fixing of best Quality LED Lighting arrangement of fully water proof IP67 ZIg-Zag strip made of LED module (Phillips or approved make) 100 Lumen/watt( containing 54 LED per Mt. &9W/Mt.) to be Fixed in proper arrangement with necessary inter connection. The letters are sealed by exterior grade Silicon. The back side of the Board Covered by 22 S.W.G G.I sheet with Nuts & Bolts.Necessary Electronic Diver / power supply device to be fixed in the ACP or suitable places Visibility : upto 300 meters for normal eyes | 48 | sqft | 2,400 ₹1,15,200 | 2,350 ₹1,12,800 Lowest | 2,385 ₹1,14,480 |
| 3.00 | Installation of the above complete LED Sign board with steel / Acrilyc letters on ACP incl. necessary iron angle/ flat, nut-bolt, washers, welding incl. necessary electrical internal wiring. | 1 | Item | 8,650 ₹8,650 | 8,500 ₹8,500 Lowest | 8,600 ₹8,600 |
| 4.00 | Carrying Charges of the manufacturing LED board from co's workshop to work site. | 1 | Item | 6,650 ₹6,650 | 6,500 ₹6,500 Lowest | 6,800 ₹6,800 |
| 5.00 | The complete sign board would be fixed on wall & would rest on 4nos MS angle (50x50x6mm) of required length by nuts, bolts, washers etc. at the bottom & top as required. The MS angles (approx 12 inch) are to be grouted on the wall after making hole on the wall & mending good damages. on all 4 sides with brass screws washers etc. after drilling hols on the frame front facia. GSB would have 2 nos hinge type doors in back side to have the inside access . | 150 | kg | 150 ₹22,500 | 130 ₹19,500 Lowest | 135 ₹20,250 |
| 6.00 | Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint 1st coat of aluminium paint over one coat of RO priming | 10 | sqmtr. | 125 ₹1,250 | 95 ₹950 Lowest | 100 ₹1,000 |
| 7.00 | 2nd coat of aluminium paint over 1st coat | 10 | sqmtr. | 55 ₹550 | 40 ₹400 Lowest | 50 ₹500 |
| 8.00 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:[panel earthing +Bulk LT room earthing] By TATA-Medium GI pipe | 2 | mtr | 1,650 ₹3,300 | 1,550 ₹3,100 Lowest | 1,600 ₹3,200 |
| 9.00 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required | 1 | mtr | 200 ₹200 | 160 ₹160 Lowest | 175 ₹175 |
| 10.00 | Connecting the equipments to earth busbar including S & F 4 SWG GI (Hot Dip) wire of size as below on wall/ floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. | 15 | mtr | 30 ₹450 | 18 ₹270 Lowest | 20 ₹300 |
Tender Value
Refer Docs
EMD Value
₹5,550
Closing Date
19 Jan 2026, 2:00 pmClosed
AE/AESDII/PWD
Office of the Assistant Engineer (P.W.D.) Asansol Electrical Sub Division II
SITC of a New Glow sign board and emergency repairing work at Asansol Circuit House, Asansol,Paschim Bardhaman.
2026_WBPWD_983466_1
WBPWD/AE/AESDII/eNIQ05(2nd call)/2025-26
Open Tender
ELECTRICAL WORKS ORG
Item Rate
7 days
Asansol
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,550
Office of the Assistant Engineer (P.W.D.) Asansol
8 Sept 2026
5 Jan 2026
22 Jan 2026
5 Jan 2026
19 Jan 2026
10 Jan 2026
9 Jan 2026
The complete sign board would be fixed on wall & would rest on 4nos MS angle (50x50x6mm) of required length by nuts, bolts, washers etc. at the bottom & top as required. The MS angles (approx 12 inch) are to be grouted on the wall after making hole on the wall & mending good damages. on all 4 sides with brass screws washers etc. after drilling hols on the frame front facia. GSB would have 2 nos hinge type doors in back side to have the inside access .
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(FOR ADM BUNGALOW Security room) 2+8Way Enclosure ( Make As per approved by EIC)(FOR ADM BUNGALOW Security room)
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS.(FOR ADM BUNGALOW Security room) 40 A DP ( Make As per approved by EIC)(FOR ADM BUNGALOW Security room)
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS.6-32 A SP ( Make As per approved by EIC)
Supply & Delivery of 1.1 KV grade XLPE/PVC insulated. PVC sheathed, steel Armoured Al. conductor Cable of the following size, and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984 / 3975:1970 /8130:1984/ 3961:1967/ 10418:1982 / 10810:1984 as amended upto date, in respect of component materials and tests, and as per the approved makes list attached herewith ( Make- Polycab/ KEI/Havells/ as per choice of EIC) The cable shall conform to anti termite and anti rodent features certificate along with Test certificate must be sumitted at the time of supply.(FOR ADM BUNGALOW Security room) a)4 core120 sqmm
b)2 Core 16 sqmm
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting
Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. a)4 core120 sqmm
Add GST @18% On total from item no 1 to 25
Add LWC @1% On total from item no 1 to 26
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 4.15 MB
Tendernotice_2.pdf
PDF • 0.55 MB
BOQ_2399729.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .