Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC PLOT NO 1134 1196 MORIVALI VILLAGE TAL AMBARNATH DIST THANE AMBERNATH 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | L1 | Accepted-AOC Awarded as first lowest bidder (L1) | |
| 2 | L2₹22.5 L+₹4.5 L (25.3%)Rejected-AOC SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L2 | Rejected-AOC Second lowest bidder | |
| 3 | L3₹24.7 L+₹6.8 L (37.7%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-AOC Third lowest bidder | |
| 4 | L4₹25.9 L+₹7.9 L (44.2%)Rejected-AOC | L4 | Rejected-AOC forth lowest bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical NOT ENLISTED IN APPROPRIATE CAT |
Tender Value
Refer Docs
EMD Value
₹38,000
Closing Date
6 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
PROVISION OF CERTAIN MINOR WORKS AT NMRL AMBERNATH UNDER GERD PASHAN
2023_MES_631548_1
GERD/PSN/TOKEN/45 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹38,000
Yes
15 Feb 2024
7 Dec 2023
8 Jan 2024
7 Dec 2023
6 Jan 2024
23 Dec 2023
7 Dec 2023 - 14 Dec 2023
Amount
Providing and Fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, complete all as specified and directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (minimum thickness of powder coating 50 micron)
Providing and fixing shutters doors, windows & ventilators including fix hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium complete all as specified and directed (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed by engineer-in-charge . With float glass panes of 5.0 mm thickness (weight not less than 12.50Kilogram/sqm)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm size complete all as specified and directed.
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete all as specified and directed.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc (200x10 mm) complete all as specified and directed.
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. (100X58X1.90 mm) complete all as specified and directed
Providing and fixing Twin rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc complete all as specified and directed.
Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P pillar cock, 32 mm C.P waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P pillar cock complete all as specified and directed.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 Square Metre on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, complete all as specified and directed by Engineer-in- Charge in all type of soil
Material and labour for Dry stone pitching 15 cm thick including supply of stones and preparing surface complete all as specified and directed of Engineer-in- charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 typeD2 (graded stone aggregate 40 mm nominal size) complete all as specified and directed.
Excavating holes more than 0.10 cum & upto 0.5 cum in soft loose soil including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, complete all as specified and directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil complete all as specified and directed.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 type B1 (using 20 mm graded stone aggregated) complete all as specified and directed.
Material and labour for Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, and including 20mm thick bed of cement mortar 1:4 Light shade pigment using white cement complete all as specified and directed.
Material and labour for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and directed.
Material and labour for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (50X50) complete all as specified and directed.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed.
Material and labour for Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coats applied @ 0.90 ltr/ 10 sqm over and under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm complete all as specified and directed.
Dismantling skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.
Demolishing cement concrete including disposal of material within 50 metres lead complete all as specified and directed by Engineer - in - charge.
Material and labour for Cement concrete 40mm thick with 20mm nominal size stone aggregate in flooring 1:2:4 Type B1 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified and directed.
Material and labour for Half brick masonry with old size fly ash bricks in Cement mortar 1:4 complete all as specified and directed.
Use and waste of Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) complete all as specified and directed.
Providing and laying in position specified grade of reinforced cement concrete, 1:2:4 Type B1(graded stone aggregate 20 mm nominal size) complete all as specified and directed. Note : Reinforcement shall be measured and paid separately
Supply and fixing thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete all as specified and directed.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) complete all as specified and directed by Engineer-in- Charge.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) complete all as specified and directed of Engineer-in- Charge
Matreial and Labour for 12 mm thick internal plaster on brick or concrete surfaces in CM 1:6 and finished even & smooth without using extra cement complete all as specified and directed.
Preparation of Newly Plastered surfaces of Wall and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of primer complete all as specified and directed.
Providing and fixing 18 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
Providing 1 mm thick 35 mm wide bright finished stainless steel piano hinges and fixing with necessary screws etc., complete all as specified and directed.
Providing and fixing 75mm long SS fancy handles for cabinet doors with necessary screws etc. complete all as specified and directed
Providing and fixing 150 mm long bright finished brass hasp and staple (safety type) with necessary screws etc. complete all as specified and directed.
Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete all as specified and directed.
Providing and fixing white vitreous china laboratory sink of size 600 mm x 450 mm x 200 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions including painting of fittings and brackets, cutting and making good the wall wherever required complete all as specified and directed.
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms complete all as specified and directed.
Providing and fixing 15 mm nominal bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 Metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints . Concealed work, including cutting chases and making good the walls etc complete all as specified and directed by Engineer in Charge.
Providing and fixing 40 mm Flexible pipe P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and directed.
Providing and fix on wall face unplasticised Rigid PVC pipes of 75 mm dia single socketed conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.
Providing and fix on wall face 75 mm bend unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC waste pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed .
Group A wiring for light/fan point/exhaust fan point/call bell point/socket point with 1.5 sqmm FRLS PVC insulated unsheathed copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point wih 1.5 sqmm FRLS PVC insulated copper conductor single core cable ect as required complete all as specified and directed.
Supplying and fixing three pin 5/6 Amps modular socket outlet on existing modular plate and switch box including connection but excl modular plate etc as reqd complete all as specified and directed.
Providing and laying vitrified floor tiles 600x600 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kilogram/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and directed.
Providing and laying Vitrified tiles 600x600 mm in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed.
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc, complete all as specified and directed of engineerin-charge.
Supply and fixing Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete all as specified and directed.
Providing and fixing 40 mm wide and 4 mm thick glass strips in joints of terrazo/ cement concrete floors complete all as specified and directed.
Brick work with common burnt clay With F.P.S.(non modular) bricks machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural ources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.
Metreial and Labour for 15mm thick plaster on brick or concrete surfaces in CM 1:4 shall be provided in two coats viz 10 mm first coat and 5 mm second coat complete all as specified and directed.
Metreial and labour for wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying Two Coat and additional coats wherever required to achieve even shade and colour.Make:- Asian Paints (Apex Ultima)/ Berger paints (Weather coat all guard) / Jenson & Nicholson (Safe Guard) complete all as specified and directed.
Shree Ayyappa Engineering
S.K.HARAL
Vipul Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .