Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC 183 MG ROAD JUNGLIGHAT PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹43.4 L+₹2.1 L (5.11%)Rejected-Finance FLAT NO B2 2 13 RABINDRANAGAR M B ROAD KOLKATA 700 060 | KOLKATA | WEST BENGAL | 700060 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹49.4 L+₹8.1 L (19.6%)Rejected-Finance 22A ASWINI DUTTA ROAD KOLKATA 700029 | KOLKATA | WEST BENGAL | 700029 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹49.6 L+₹8.3 L (20.1%)Rejected-Finance 52A 1A NAZIR LANE KIDDERPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹50.1 L+₹8.8 L (21.4%)Rejected-Finance VILL JETHIA NATUN PARA PO JETHIA HALISAHAR PIN 743135 | 24 PARAGANAS NORTH | WEST BENGAL | 743135 | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
PROVN OF MULTI PURPOSE SHED AT ECIB AND PROVN OF CERTAIN MINORS WORKS UNDER GE (FW) KOLKATA
2023_MES_605464_1
8138/E8
Open Tender
Civil Works
Item Rate
150 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹90,000
6 Oct 2023
24 Jun 2023
27 Jul 2023
24 Jun 2023
26 Jul 2023
19 Jul 2023
Amount
Demolition of brick work or stone boulder masonry built in cement mortar including all quaries, arches pillars etc and removing off the site complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
M&L for surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil.complete all as specified and directed.
Excavation in post holes each not exc 0.5 cum getting out returning filling in and removing earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50m and making good surface as in soft /loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soils, complete all as specified and directed.
M&L for returning filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm for soft/loose soil complete all as specified and directed.
M&L for removing excavated materials exc 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soils, complete all as specified and directed.
M&L for removing excavated materials exc 1.50 KM but not exceeding 5.00 KM and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soils, complete all as specified and directed.
M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M & L for plain cement concrete (1:4:8) type D2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M & L for plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M & L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M&L for brickwork with fly-ash old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
M&L for rendering 15 mm thick to fair faces of brick work / concrete surface in cement mortor (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick to fair faces of brick work / concrete surface in cement mortor (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in alternate bays, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in sub base of concrete, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub bases of floors complete all as specified and directed.
M&L 100 mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floors, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for glass dividing strips 3mm thick, 38mm width of strip inserted in position, confirm to design in concrete floor, complete all as directed by the Engr-in-Charge.
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 15 mm thick cement mortar 1:4 complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles and fixed over and including backing coat of 15mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L for 18-20 mm thick black/coloured granite Slab, machine cut, as in flooring, fixed over and including 10 mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tiles including rubbing and polishing complete all as specified and directed..
M&L for machine cut kota stone slab flooring 18-20 mm thick, laid over and including 15mm thick screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
M&L for grainding/polishing and cutting to existing stone floor of any description such as Kota stone, Marble stone, terrazo, granite etc., and similar surfaces,and cleaning with water and applying zinc oxide powder, complete all as specified and as directed
M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for pre-polished Chequered cement concrete tiles (coloured) of size 400mmx400mmx25mm thick, set, jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement & pigment to match the surface laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces, with and including 15mm thick backing layer in CM (1:4) set and jointed in neat cement slurry and pointed with white/coloured cement & pigment to match the shade of tiles, complete all as specified and directed. Make: Multiwyn/Ultra or Equvalent.
M&L for laying pre-polished 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe-410-W (Gde-E 250) quality-B complete all as specified and directed.
S&F plates (plain or chequered) channels, square cut or notched (ordninary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs (framed) including stringers, treades landing, balusters, hand rails etc including cleats, brackets etc., complete all as specified and as direceted by Engr-in-Charge.
S&F Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 to 16mm dia of neck and exc 5cm but n exc 10cm long, complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 to 16mm dia of neck and exc 10cm but n exc 15cm long, complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
M&L for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for 1.25mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), in provided to welding, complete all as specified and directed.
Supply and fix 2 mm thick fibre glass reinforced translucent corrugated sheeting coloured/printed with two corrugation side lap fixed with coach screw and washer in roof, walls etc., as in repairs, complete all as specified and directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L Preparing new plastered surfaces of Wall and applying two Coats of acrylic bound distemper over one coat of alkali resistant primer with roller, over 1mm to 2mm thick plaster of paries, complete all as specified and as directed.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint over a coat of alkali resistant primer with brush, complete all as specified and as directed.
M&L for applying One coat of acrylic distemper with roller on old decorated surfaces of walls, including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
All as per item No 45 above, but as in Ceilings
S&F Factory made solid PVC door frame (chowkhat) of size 50 mm x 47mm made out of 5mm plain colour PVC sheet, frame reinforced with MS square tube, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.
M&L for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.
Supply & fixing 100 mm mild steel butt hinges(medium weight) cold rolled complete all as specified and directed.
S&F Aluminium handles, cast type, anodised, 125 mm complete all as specified and directed.
S&F 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F Block boards 18 to 19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work (as in cup board etc) complete all as specified and as directed.
S&F 0.90 mm thick decorative type laminate, fixed to ply wood or blockboard with suitable adhesive complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm complete all as specified and directed.
S&F stainless steel handle 150 mm long decorative type complete all as specified and directed.
S&F multipurpose cupboard lock, brass, 50 mm size complete all as specified and directed.
S&F cupboard magnet, heavy duty complete all as specified and directed
S&F stainless steel tower bolt, 120 mm long, heavy duty complete all as specified and directed.
Supply, Laying and testing 15mm bore Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed .
Supply, Laying and testing 20mm bore Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed .
Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres and providing necessary connections complete all as specified and as directed.
S&F 25 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-153 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout, sink mounted type, screwed for iron pipe etc complete all as directed (MAKE :PARRYWARE, Cat No : G4803A1 / CERA, Cat No: F1003104 / PRAYAG, Cat No : 9014/ HINDWARE, Cat No: F280012 / JAQUAR, Cat No: SOL-6357)
S&F in repairs Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer complete all as specified. (MAKE:- PRAYAG , Model No- P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)
S&F commercial kitchen sink made out of stainless steel sheet SS 304, 18 gauge of overall size 1524 mm x 610 mm x 0.914 mm with legs and bowl size 1327 mm x 450 mm x 203 mm depth, glossy finish, with plugs, washers, CP waste couplings, 32 mm dia PVC waste pipes (of suitable size), connecting union etc., (Make & Model; As per sample, as approved by GE) complete all as specified and as directed.
S&F CP waste coupling, 32 mm, full thread type complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-16B / Essco, Cat No: ALE-543FT or equivalent model in other makes specified in tender)
S&F for easy dry wall mounted stand consisting of four anodised aluminium pipes, each of outer dia 22mm and inner dia 19.8mm mounted on anodised aluminium angle of size 40 x 40 x 3 mm of Model Mount it 18. 4 pipes 4.5ft each weight 1.8 Kg including all necessary fittings etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry wall mounted stand consisting of four anodised aluminium pipes, each of outer dia 22mm and inner dia 19.8mm mounted on anodised aluminium angle of size 40 x 40 x 3 mm of Model Mount it 14. 4 pipes 3.5ft each weight 1.6 Kg including all necessary fittings etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry ceiling/weather shed fitted sysyem of pulley operated clothes drying system consisting of anodised aluminium pipes, each of outer dia 22mm and inner dia 19.8mm and pulleys made up of delrin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable), locking system to hide rope knot, channel to be mounted or fixec with self-tapping scews provided it kit and including rope will be polyster braided undyed of 4mm dia of Model Pull it 8 feet, including all necessary fittings etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry ceiling/weather shed fitted sysyem of pulley operated clothes drying system consisting of anodised aluminium pipes, each of outer dia 22mm and inner dia 19.8mm and pulleys made up of delrin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable), locking system to hide rope knot, channel to be mounted or fixec with self-tapping scews provided it kit and including rope will be polyster braided undyed of 4mm dia of Model Pull it 6 feet, including all necessary fittings etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry accessories for pupp-it-pulley system 31" L angle made out 20mm Square MS Pipe, powder coated with provision of fixing 4 pipes of pull-it-system with 4 holes for mounting provided with mounting nails etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry accessories for pupp-it-pulley system C- Bracket 24 etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry wall mounted stand consisting of 19mm dia powder coated MS base frame with a structure (mesh) of 6 Nos of 202 grade SS rods of 5mm and length 750mm for drying cloths and each mesh has total length of 4.50 M (Approx 15Ft) of SS rods of Model mount it 45, drying length 45 Ft, mounting frame of size 28" x 31.5", weight 3.10 Kg, including all necessary fittings etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for easy dry wall mounted stand consisting of 19mm dia powder coated MS base frame with a structure (mesh) of 6 Nos of 202 grade SS rods of 5mm and length 750mm for drying cloths and each mesh has total length of 4.50 M (Approx 15Ft) of SS rods of Model mount it 30, drying length 30 Ft, mounting frame of size 28" x 31.5", weight 3.10 Kg, including all necessary fittings etc., complete all as specified and directed. (Make: Easy Dry System Pvt Ltd (EDSPL) or equivalent model as approved by GE)
S&F for panelling by using factory finished custom designed cold form light gauge steel frame work of (AZ-150 gsm aluminium zinc alloy coated steel having minimum yield strength 300-550 MPA) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction also as per IS: 875-1987, ISO:800-1984 and ISO: 801-1975. On which 8mm thick Art stone boards is fixed on top of 6mm thick fiber cement board to the frame work using 35mm fully threaded self embedding screws. The boards should be finished to have uniform gap/grooves, complete all as specified and directed. (Make: Everast or equivalent/model as approved by GE)
S&F 6mm thick solid polycarbonate sheet, as in roofing/ wall cladding, fixed with self taping screws, complete all as specified and directed.
Piu Projects
EAST COAST STANDARD PRODUCTS
M/S S. K. SARKAR
BASU AND CO
DEB AND COMPANY
JOY-EN-JOY
MUKHERJEE ENTERPRISE
CHOWDHURY SMALL INDUSTRIES
UNIVERSAL TRADING CENTRE
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .