QUANTUM OF WORKS INVOLVED IN SHIFTING OF 11 KV DUE TO CONSTRUCTION OF GANGA EXP. CH NO. 420 plus 992 INDUSTRIAL CORRIDOR AT MUTAZA NAGAR, SARAY KATIYAN, UNNAO UNDER THE FULL DEPOSIT SCHEME UNDER THE AREA OF THE EDD-P.D. NAGAR, UNNAO.

Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

S.T. Pole 11 mtr long

Other loose line materials with including conductor, Single and double Pole accessories, complete stay & earthing, insulator, diff. Channel & Angle, distribution box, x-arm, etc. from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

ACSR Rabbit Conductor

Dismantling of existing old O/H 11 KV Line including rolling back its conductor/G.I. wire from work site to dump site.

Dismantling of existing old Pole and X-arms, brackets, Insulators, Channels and all hardware fittings.

Fabrication/Modification of MS Items/Nuts & Bolts as requirement of site condition

Erection of ST double pole (11 KV) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

Clamp for Top and Dropper channel with N&B

Erection of ST Single Pole (11 KV) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

11 KV F-Clamp with N&B

Cross Arm Holding Clamps

Making T-off arrangement including fabrication & fitting of accessories.

Supply & Fixing of following materials for above job-

Holding clamp for T-off Channel with N&B

Earthing of Pole as per RESPO NORMS

Grouting of ST Pole as per RESPO Norms with grouting materials.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

Supply & Fixing of following materials for above job-

Stay Clamp with N&B

Stay Insulator

Laying stringing and sagging of O/H 11 KV Line Three Phase by Conductor including all associated work with joint/jumpers and binding of insulator as required.

Scrubbing, rubbing, cleaning and painting of Single & double Poles structure, one coat with red oxide and two coats of Aluminium paints (ISI mark paint)

Supply & fixing of Danger board with clamp as per RESPO NORMS

Supply & fixing of Barbed wire at Poles as per RESPO NORMS

Supply & fixing of Number Plates with clamps at Poles as per RESPO NORMS

Safe Carriage of existing old & used conductor from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

Safe Carriage of existing old Pole and X-arms, brackets, Insulators, Channels and all hardware fittings from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

NOTE:- 1. All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2. One carriage including loading/unloading from dump site to pit site is included in scope of work. 3. During execution of work all risk will be of the contractor. 4. Contractor will provided all T & P, vehicle and man power. 5. All the old and used material should be taken on book. 6. The quantity may be vary ± 20%