Construction of Gate near 2nd exit flyover at Balijhara, Paradip Port

Bill of Quantity (Summary)

Name of the Work :- Construction Of Gate Near 2nd Exit Flyover At Balijhara,

Paradeep Port, Odisha

SL.No. Description of Item Amount

ii. Site devlopment 10,35,325.33

iii. Drain & pathway 31,18,261.00

Iv. Rigid Pavement 22,01,185.47

1 Sub-Total (Civil Work) 3,37,09,398.80

B Electrical Work

i. Façade Lighting 47,80,878.80

ii. Area Lighting 10,19,201.00

iii. Security Room 6,39,340.98

2 Sub-Total (Electrical Work) 64,39,420.78

3 GRAND TOTAL 4,01,48,819.58

3 GRAND TOTAL 4,01,48,819.58

Digitally signed by JAYA

Abstract - Gate (Civil Work)

Sl. No. Item of Work Unit Quantity Rate Amount

1 Site Clearance

Clearing grass and removal of the rubbish up to a distance of 50 m outside the

periphery of the area cleared.

2 Earthwork Excavation

Earth work in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift

including rough dressing and breaking clods to maximum 5cm to 7cm laying inlayers

a) not exceeding 0.3m in depth and the Earth transported by transport vehicles with Cum 71.90 235.09 16903.07

supply of all material labour transporation , taxes , tollage , royalties etc all complete

as directed by EIC.

3 Cast-in-situ reinforced cement concrete piles

Double under reamed pile foundation of 375mm dia. and 9m length with R.C.C. M30

using 12mm size black hard granite (crusher broken) stone chips including cost of

boreholes but excluding cost of M.S. rod/Tor steel and labour chrages for cutting,

bending and binding of steel.

4 Sand Filling

Filling in foundation and plinth with sweet sand including watering and ramming as

directed by the Engineer-in-charge .

5 Back Filling

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited

layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cum 47.93 156.73 7511.95

cost of all labour, sundries T & P etc complete in all respect as per the direction of

Engineer-In-Charge.

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation

& plinth including mixing hosting, laying to proper level & slope consolidating,

curing, watering charges etc. complete including cost & supply of all materials, Cum 3.69 5966.38 22015.92

labour, T&P, taxes , tollage , royalties etc all complete as directed by EIC

7 Anti-termite Treatment

Providing & applying of pre constructional anti-termite treatment Confirming to IS

6313 (Part-II) and creating chemical barrier under and around the column pits, wall

trenches, basement excavation top surface of plinth filling, junction of wall and floors

along with external perimeters of building, expansion joints, surrounding the pipes

and conducts etc. at the rate at 7 ,5 liter per sqm on vertical surface and 5.0 liter per sqm 75.82 123.31 9349.36

sqm on horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit

of water cost of all materials, labour,conveyance, T&P , all taxes and hire charges of

machinaries as per direction of Engineer-incharge.

C.C. M30 for R.C.C. works using 20mm and 10 mm size C.B.G. chips for all

floors, foundation & plinth etc. of approved quality, mixing with a concrete mixture

as per approved design mix, hoisting, laying, compacting with40 to 60 mm neddle

vibrator, curing with supply of all materials, labour, T&P, taxes, tollage

transportations, staging, scaffolding, curing, etc. all complete as per direction of

Engineer-in-charge.

A Foundation and plinth

Plinth Beam Cum 6.39 11519.70 73610.90

Super structure

Step column at Level at 14.5 Cum 1.19 30201.43 35939.70

Digitally signed by JAYA

Sl. No. Item of Work Unit Quantity Rate Amount

9 Reinforcement

Supply Tor/TMT steel of Fe-500 confirming to IS-1786 including cutting,

straightening, bending, binding & placing the grills in position for RCC works

including binding the grills with binding wire of 18 to 20 gauge including cost of

steel, all labour, materials, transportation charges, T&P, taxes, etc. all complete as per

the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight

than theoretical co-efficient).

Foundation and plinth qtl 67.18 8926.20 599662.41

Superstructure qtl 328.11 8926.20 2928776.93

10 Fly Ash Bricks

Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not

less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking

out the joints curing, hoisting, staging at any height with cost and supply of all

materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges

etc. all complete as per direction of Engineer-in-charge.

11 12 mm Plastering

12 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work

including racking out the joints, finished smooth to the exposed surface, rounding the

corners wherever found necessary including supply of all materials, labour, T&P,

staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc.

complete & as per direction of Engineer-in-charge

12 16 mm Plastering

16 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work

including racking out the joints, finished smooth to the exposed surface, rounding the

corners wherever found necessary including supply of all materials, labour, T&P,

staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc.

complete & as per direction of Engineer-in-charge.

13 6 mm Plastering

6 MM thick Cement plaster with cement mortar (1:4) proportion, over RCC work

including racking out the joints, finished smooth to the exposed surface, rounding the

corners wherever found necessary including supply of all materials, labour, T&P,

staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc.

complete & as per direction of Engineer-in-charge

14 Vitrified tile flooring & skirting

Providing full body matt finish vitrified tile flooring using vitrified tiles having

thickness of min 10mm conforming to IS 13755 of 1200x600 (shade to be decided as

per Ama Hospital scheme) (homogeneous) of premium quality in floors, treads on

steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper

slope and gradient with screened and washed sharp sand for mortar and fixing with

neat white cement slurry,grouting the joints with neat white cement slurry mixed with

required quantities of pigments of approved make to match the shades of the vitrified sqm 16.39 1145.33 18771.98

tile if required , watering and curing for 21 days, including cost, conveyance, loading,

unloading, royalties and taxes of all materials, cost of all labour,Labour cess, sundries,

T&P required for the work, complete in all respect as per specification and direction

of Engineer-in-charge.

15 Aluminum Door

Digitally signed by JAYA

Sl. No. Item of Work Unit Quantity Rate Amount

Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as

vertical member, 9201 as top member and 9200 as bottom and middle member and

size of the aluminium section is 125 mm x 37 mm x 1.50 mm and 12mm thick pre-

laminated board on bottom & 6 mm plain glass on top fixed door frame by means of

tapered clip No. 4660 and the frame to be completed by means of jointing angle No.

1855 including providing rubber beading, aluminum U channels, angle, clips, sqm 3.78 5875.18 22208.20

required nos. of handles, tower bolts, hooks, mortise lock & hydraulic door stopper as

per relevant I.S. specification, etc. all finished including supply of all labour,

materials, scaffolding up to any height transportation charges T&P, all taxes etc.

complete as directed by the Engineer-in-charge.

16 Aluminum Window

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section

9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with

5mm thick black glass as panel fitted with rubber bending including locking

arrangement including all fitting including supply of all labour, materials, scaffolding sqm 6.44 4320.68 27825.15

up to any height transportation charges T&P, all taxes etc. complete as directed by

the Engineer-in-charge.

17 Dholpur Red Sandstone

Supply and fix 22 mm thick Dholpur Red Sandstone tiles/slabs, of uniform colour and

texture, free from cracks, excessive blemishes or warping, with square edges (or as

per approved design) and surface finish (polished, honed, natural, sawn, etc.) as

specified. Tiles/slabs shall be of approved size and finish. On-site fixing shall include

correct bedding or adhesive, cutting and finishing of edges or special shapes,

levelling, alignment and provision of uniform joint widths. After fixing, all joints shall sqm 524.34 8252.92 4327336.07

be grouted or filled with matching materials; sealants or protective coatings shall be

applied where required; final cleaning to remove mortar, stains or debris shall be

carried out as per the Engineer-in-Charge. All work and materials shall include all

applicable taxes, duties, levies, insurance, safety, and handling charges.

Manufacturing, Providing and Installation of GFRC (Glass Fiber Reinforced

Concrete), of thickness 30 mm with where fixing to be done Pattern, design, and

colour of approved make to be fixed on/between RCC /Block work Column or

structural work with Dry Fixing method with appropriate MS Structural & Cleats

frame work, using fasteners, and necessary hardware etc. The element shall be made

from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine

Silica Sand, Alkali Resistant Glass fibre make 'Owens Corning' or equivalent, Super

plasticizers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or

equivalent and U.V resistant Synthetic inorganic pigments shall be used for

pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting

shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool /

Mould Grade Resin of Revex/ 'Reckli' or equivalent.

a DOME-1 Conforming to the drawing no.:- STPL/NBCC/PP/GATE/AR/01 4.00 236082.60 944330.40

b DOME-2 Conforming to the drawing no.:- STPL/NBCC/PP/GATE/AR/01 1.00 795225.60 795225.60

CORNICE (1.00x0.34x0.45) Conforming to the drawing no.:- Rmt

STPL/NBCC/PP/GATE/AR/01

d BRACKET Conforming to the drawing no.:- STPL/NBCC/PP/GATE/AR/01 112.00 1449.63 162358.56

ORNAMENT-1 Conforming to the drawing no.:- STPL/NBCC/PP/GATE/AR/01

ORNAMENT-2 Conforming to the drawing no.:- STPL/NBCC/PP/GATE/AR/01

g COLUMN Conforming to the drawing no.:- STPL/NBCC/PP/GATE/AR/01 6.00 346254.48 2077526.88

42 letters including installation & Transportation charges Description: Stainless steel

304 grade golden coated, 3D letter & 2" Raising letter as per the drawing. Nos. 42.00 23010.00 966420.00

Logo including installation & Transportation charges

Description: Stainless steel 304 grade golden coated, 3D letter & 2" Raising letter as Nos. 1.00 69030.00 69030.00

per the drawing.

19 Cement Primer

Digitally signed by JAYA

Sl. No. Item of Work Unit Quantity Rate Amount

one coat Priming with water bond cement primer to the newly plaster surface of the

exterior Wall or over the exisitng putty surface of the interior wall of approved make

& shade manufactured by reputed manufacturer or equivalent to make an even

finished surface in all heights with all scaffolding and staging charges including sqm 1719.96 84.09 144625.93

supply of all materials, labour, T&P, all taxes, transportation charges, staging,

scaffolding, etc.all complete as per direction of Engineer-in-charge.

Finishing the wall surface by applying two coat Arcylic wall putty water base of

approved quality on plaster surface area including cleaning, brushing, removing the

flakes sand papering the same for smooth surface includingsupply of all materials,

labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete as

per direction of Engineer-in-charge.

21 Plastic Emulsion

Wall painting two coats with 100% Acrylic emulsion paint (1st quality)

exterior grade of approved make & shade manufactured by reputed

manufacturer like or equivalent to make an even finished surface over a coat of

primer with water bond cement primer in all heights with all scaffolding and staging

charges including supply of all materials, labour, T&P, all taxes, transportation

charges, staging, scaffolding, etc.all complete as per direction of Engineer-in-charge

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with special shaped washers etc.

complete. DSR 2023 Sl No-10.16.1 P-172

23 Red Oxide zinc Primer

With ready mixed red oxide zinc chromate primer of approved brand and manufacture

on steel galvanised iron/ steel works.DSR 2023 Sl No-13.50.3 P-204 Sqm 1300.00 65.22 84784.18

24 Epoxy paint

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied

as per manufacturer’s specifications including appropriate priming coat, preparation Sqm 1300.00 233.92 304100.16

of surface, etc. complete.DSR 2023 Sl No-13.52.1 P-204

Digitally signed by JAYA

Abstract - Site Development (Civil Work)

Sl. No. Item of Work Unit Quantity Rate Amount

1 Cleaning & grubbing

Clearing grass and removal of the rubbish up to a distance of 50 m outside

the periphery of the area cleared.

Earth work in hard soil or gravelly soil within 50m initial lead and 1.5m

initial lift including rough dressing and breaking clods to maximum 5cm to

7cm laying inlayers not exceeding 0.3m in depth and the Earth transported

by transport vehicles with supply of all material labour transporation , taxes , cum 124.13 235.09 29,181.90

tollage , royalties etc all complete as directed by EIC.

3 Sand Filling

Filling in foundation and plinth with sweet sand including watering and

ramming as directed by the Engineer-in-charge

4 Filling excavated earth

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth, consolidating each

deposited layers by ramming and watering, lead up to 50m and lift up to 1.5

mt etc. including cost of all labour, sundries T & P etc complete in all respect cum 110.34 156.73 17,293.32

as per the direction of Engineer-In-Charge.

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in

foundation & plinth including mixing hosting, laying to proper level & slope

consolidating, curing, watering charges etc. complete including cost & cum 8.28 5,966.38 49,401.59

supply of all materials, labour, T&P, taxes , tollage , royalties etc all

complete as directed by EIC

6 Anti-termite

Providing & applying of pre constructional anti-termite treatment

Confirming to IS 6313 (Part-II) and creating chemical barrier under and

around the column pits, wall trenches, basement excavation top surface of

plinth filling, junction of wall and floors along with external perimeters of

building, expansion joints, surrounding the pipes and conducts etc. at the rate

at 7 ,5 liter per sqm on vertical surface and 5.0 liter per sqm on horizontal sqm 82.75 123.31 10,203.90

surface. Chemicals:- Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water

cost of all materials, labour,conveyance, T&P , all taxes and hire charges of

machinaries as per direction of Engineer-incharge.

7 Fly Ash brick (1:6)

Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing

strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including

splay/cutting, racking out the joints curing, hoisting, staging at any height

with cost and supply of all materials, labour, T&P, taxes, royalties, cum 4.12 5,543.12 22,848.74

transportation charges, curing, testing charges etc. all complete as per

direction of Engineer-in-charge.

8 16 mm thick cement plaster

16 MM thick Cement plaster with cement mortar (1:6) proportion, over brick

work including racking out the joints, finished smooth to the exposed

surface, rounding the corners wherever found necessary including supply of

all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, sqm 36.00 292.96 10,546.51

testing charges, tollage, royalties, etc. complete & as per direction of

Engineer-in-charge.

Digitally signed by JAYA

Sl. No. Item of Work Unit Quantity Rate Amount

Providing and laying at or near ground level factory made kerb stone of M-

25 grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making

joints with or without grooves (thickness of joints except at sharp curve shall

not to more than 5 mm), including making drainage opening wherever

required complete etc. as per direction of Engineerin- charge (length of Nos. 72.00 9,789.79 7,04,820.64

finished kerb edging shall be measured to calculate volume for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm

thickness of existing ground prepared with proper level and ramming with

tools wooden (Dhurmos) and than rolling the surface with light roller make

the surface smoothen and light waterning with sprinkler and maintenance for

30 days or more till the grass establish properly, as per direction of officer-in- Sqm 365.67 248.63 90,914.90

charge.(REF: Horticulture & Landscaping DSR-2025 , Page no-111,

Seriel No-2.33)

Providing, stacking and Displaying Foxtail palm well developed with fresh

& healthy foliage of ht. plant 210 cm to 240 cm in 40 cm Cement Pot/

Plastic Pot and as per direction of the officer-in-charge. (REF: Horticulture Each 25.00 1,253.53 31,338.15

& Landscaping DSR-2025 , Page no-183, Seriel No-5.30)

Cineraria (REF: Horticulture & Landscaping DSR-2025 , Page no-612, Per Tray

12 Seriel No-10.1.10)

Dianthus hybrid (REF: Horticulture & Landscaping DSR-2025 , Page no- Per Tray

Cosmos hybrid (REF: Horticulture & Landscaping DSR-2025 , Page no- Per Tray

Digitally signed by JAYA

Abstract - Drain & Pathway (Civil Work)

Sl. No. Item of Work Unit Quantity Rate Amount

1 Dismantling PSC/RCC

Dismantling and removing R.C.C. columns, beams, slab, staircase landing,

lintels including stacking the useful materials for reuse and removing the

debris within 50m cleaning the debrises with with supply of all materials,

labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties,

etc. complete & as per direction of Engineer-in-charge all taxes, including

leads & lifts transportation & disposing at specified place and as per

direction of Engineer-in-charge.

2 Dismantling CC

Dismantling cement concrete including stacking the useful materials for

reuse and removing the debris within 50m cleaning the debrises with with

supply of all materials, labour, T&P, staging, scaffolding, watering, curing,

taxes, tollage, royalties, etc. complete & as per direction of Engineer-in-

charge all taxes, including leads & lifts transportation & disposing at

specified place and as per direction of Engineer-in-charge.

Earth work in all kinds of soil within 50m lead and 1.5m lift including

rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in

layers not exceeding 0.3m in depth and as per specification complete.

2 Sand Filling

Filling in foundation and plinth with sweet sand including watering and

ramming as directed by the Engineer-in-charge

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in

foundation & plinth including mixing hosting, laying to proper level & slope

consolidating, curing, watering charges etc. complete including cost &

supply of all materials, labour, T&P, taxes , tollage , royalties etc all

complete as directed by EIC.

Construction of granular sub-base by providing Close graded Granular

subbase Grading-VI material as per table 400-1, spreading in uniform layers

with motor grader on prepared surface, mixing by mix in place method with

rotavator at OMC, and compacting with vibratory roller to achieve the

desired density complete as per Clause 401 of MoRT&H Specifications for

Road & Bridge works (4th Revision)

C.C. M25 for R.C.C. works using 20mm and 10 mm size C.B.G. chips for

all floors, foundation & plinth etc. of approved quality, mixing with a

concrete mixture as per approved design mix, hoisting, laying, compacting

with40 to 60 mm neddle vibrator, curing with supply of all materials,

labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc.

all complete as per direction of Engineer-in-charge.

6 Centering & shuttering

Providing rigid smooth leak proof centering & shuttering made of steel/ply,

plank of approved quality for R.C.C. structures and deshuttering and

removing the same after due period with supply of all materials, labour,

T&P, taxes, royalties, tollage, etc. all complete as directed by Engineer-in-

Digitally signed by JAYA

Sl. No. Item of Work Unit Quantity Rate Amount

6 Reinforcement

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of

primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL /

SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding

and jointing if necessary and tying the grills and placing in position as

required for R.C.C. Work and for providing fan hooks as required, hoisting,

lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel

and binding wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors with labour cess etc.

(payment will be made on standard weight of B.I.S. for M.S. Rods or tor

steel only) etc. complete as per specification & direction of Engineer-in-

7 M-35 Paver Block

Providing and laying factory made chamfered edge Cement Concrete paver

blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of

required strength, thickness & size/ shape, made by table vibratory method

using PU mould, laid in required colour & pattern over 50 mm thick

compacted bed of sand, compacting and proper embedding/laying of inter

locking paver blocks into the sand bedding layer through vibratory

compaction by using plate vibrator, filling the joints with sand and cutting of

paver blocks as per required size and pattern, finishing and sweeping extra

sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C.

paver block of M-35 grade with approvedcolour design and pattern. (DSR

8 Pre cast kerb stone

Supplying and fixing of Pre cast kerb stone of size 300mm x300mm x

150mm of M-30 grade of approved make, design, colour and size made by

Block making machine with proper compaction fixed in required pattern etc.

complete in all respect conforming to IS 5758:1984 (SOR 2022: Page No

233, Item No: 3, New Miscellaneous Items )

Digitally signed by JAYA

Abstract - Rigid Pavement

Sl. No. Item of Work Unit Quantity Rate Amount

1 Site Clearance

Clearing grass and removal of the rubbish up to a distance of 50 m outside the

periphery of the area cleared.

2 Earthwork in Excavation

Earth work in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift

including rough dressing and breaking clods to maximum 5cm to 7cm laying inlayers

not exceeding 0.3m in depth and the Earth transported by transport vehicles with Cum 270.00 235.09 63474.68

supply of all material labour transporation , taxes , tollage , royalties etc all complete

as directed by EIC.

3 G.S.B - GRADE - (III)

Construction of granular sub-base (Grade-III) by providing close graded Material

conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of

mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers

of specified thickness with motor grader on prepared surface and compacting with Cum 153.00 2717.55 415785.43

vibratory power roller to achieve the desired density, complete as per specifications

and directions of Engineerin-Charge. (DSR 2023 P-237 Sl No-16.78.3)

Construction of dry lean cement concrete subbase over a preapred subgrade with

coarse and fine aggregate confirming to IS:383, the size of coarse aggregate Nost

exceeding 25mm., aggregate cement ration Nost to exceed 15:1, aggregate gradation

after blending to be as per table 600.1, cement content Nost to be less than

150Kg./Cum., optimum moisture content to be determined during trial length

construction, concrete strength Not to be less than 10MPA at 7 days, mixed in a

batcking plant, transported to site, laid and compacting with vibratory roller 8 to 10 Cum 122.40 3479.11 425843.31

ton capacity , finshing and curing as per clause 601 of MoSRT&H specification for

road & bridge works (4th revision).with supply of all material labour,T&P,

transporation hire and running charge of equipments, taxes , tollage , royalties etc all

complete as directed by EIC.

Cement concrete of M-35 grade of PQC by using Crusher broken hard granite chips

of 12mm to 20 mm size of approved quality for RCC road work, mixing in a

Batching plant, transporting the concrete by any approved means, hoisting, laying

with a mechanical paver with auto vibrator on road pavement slabs in panels of

required size, providing thermocol at top 50 mm of the panel joints so as to create a

gap of 12mm between panels, compacting by mechanical vibrator with 60mm needle

vibrator, finished smooth to the exposed surface to proper grade and camber,

texturing the top surface by brooming with wire brush, curing by ponding, barricading

the area for proper safety of the fresh concrete without obstructing the traffic, etc with

supply of all materials, labour, T&P, tollage, all transportation charges, engagement,

hire & running charges of all machineries, taxes and excluding cost of formwork,

cost of joints, cost of steel & labour charges for bending & binding of steel etc all

complete as directed by Engineer in Charge. (N.B. : 1)Two separate Mix Design shall

be conducted with different Cement brand for RCC work & Barricading the site if

required.2)material testing cost borne by contractor.)

Digitally signed by JAYA

Abstarct - Façade Lighting (Electrical Work)

S.No Item of Work Unit Quantity Rate Remarks

Neon Flexi Strip Light :Supply, Installation, Testing & Commissioning of 16mm X 16mm of 5

meters length RGBW Neon Flexible strIPled light with Non- Integral driver embedded inside. The

luminaire’s shall be made of Silicon extrusion with high-efficiency, high grade appearance, soft bend

flexibility & Option of Top bend , the same shall be so designed with completely made in India

luminaire.The luminaire shall have silicon glue between optical cover & LED chamber to ensure

proper IP67 protection. Required external decoder. The LEDs shall have minimum CRI ≥80 (White

Light). The luminaire shall have system wattage of 14 Watt/ meter. Fixture shall operating

temperature range of 0°C to 45°C. The fixture shall have an Non integral driver with input voltage for

220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours The luminaire Spool 20 48,053.14 9,61,062.80

shall be compatible with DMX512 controller. The luminaire shall automatically addressable using

hand-held addressing device. The luminaire shall be capable of 6-bit control of RED, Green, Blue &

White (W=4000K) to produce 16.7million colours. Luminaire manufacturer must have In-house

NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical bid. Bidder shall submit the following

reports along with technical bid LM79 report of the family of luminaire issued by NABL accredited

lab, LM80 issued by LED manufacturer BIS certificate for LED Luminaire.. Brand name shall be

embossed / printed on each an every light fixtures.

2 Sypply and installtion 5mtr spool aluminum channel for fixing Neon strip led with required fixtation

equipment on wall, panels etc.

Circular Flood Light :Supply, Installation, Testing & Commissioning of RGBW Circular Flood

light with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED

of RGBW ChIP and not descrete individual LEDs of each colour for colour effect. The luminaire’s

shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has

IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs

shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage

36W and shall deliver 1980 lumens. Beam angle of the Luminaire shall be 15 deg .Fixture shall

operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000

burning hours at L70. The luminaire shall be compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit

control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL

accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by

LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

Circular Flood Light :Supply, Installation, Testing & Commissioning of RGBW Circular Flood

light with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED

of RGBW ChIP and not descrete individual LEDs of each colour for colour effect. The luminaire’s

shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has

IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs

shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage

72W and shall deliver 3960 lumens. Beam angle of the Luminaire shall be 15 deg .Fixture shall

operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000

burning hours at L70. The luminaire shall be compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit

control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL

accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by

LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

Circular Flood Light :Supply, Installation, Testing & Commissioning of RGBW Circular Flood

light with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED

of RGBW ChIP and not descrete individual LEDs of each colour for colour effect. The luminaire’s

shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has

IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs

shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage

24W and shall deliver 1320 lumens. Beam angle of the Luminaire shall be 60 deg .Fixture shall

operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000

burning hours at L70. The luminaire shall be compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit

control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL

accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by

LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

Digitally signed by JAYA

S.No Item of Work Unit Quantity Rate Remarks

Rectangular Flood Light :Supply, Installation, Testing & Commissioning of Rectangular Flood

light with Non-integral driver & completely made in India luminaire. Luminaire must use Single LED

of RGBW ChIPand not descrete individual LEDs of each colour for colour effect. The luminaire’s

shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has

IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs

shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage

144W and shall deliver 6480 lumens. Beam angle of the Luminaire shall be 15 deg .Fixture shall

operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC, Integrated DMX

Decoder,No need to additional external decoder. The luminaire shall have declared life of 50,000

burning hours at L70. The luminaire shall be compatible with DMX controller. The luminaire shall

automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit

control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Luminaire and

Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL

accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by

LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed /

engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare,

Driver and controller should be with same make.

Linear Wall Washer :Supply, Installation, Testing & Commissioning of 1000 mm length X 80mm

Width X 115mm Height RGBW Linear Wall Washer with Non-integral driver & completely made

in India luminaire. Luminaire must use Single LED Array of RGBW ChIPand not descrete individual

LEDs of each colour for colour effect. The luminaire’s shall be made of Extruded aluminum housing

powder coated in grey. The complete luminaire has IP66 & IK07 protection and it comprises of high

purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall

have SDCM≤5. The luminaire shall have wattage 24W and shall deliver 960 lumens. Beam angle of

the Luminaire shall be 15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input

Voltage Range of 24V DC, Integrated DMX Decoder,No need to additional external decoder. The

luminaire shall have declared life of 50,000 burning hours at L70. The luminaire shall be compatible

with DMX controller. The luminaire shall automatically addressable using hand-held addressing

device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to

produce 16.7million colours. Luminaire and Driver must be made in India with same brand. Luminaire

manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must

submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80

, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand

name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be

Made in India. Luminare, Driver and controller should be with same make.

8 LED Driver: Supply of Isolated, constant Voltage type 240 W LED Driver enclosure in Extruded

Aluminium metal enclosure . Driver shall be made in India compatible for RGBW luminaires with

silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc.

Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and

Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large

operating input voltage range of 140V to 300V AC(nominal rated voltage – 240V) with 5KV internal

surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal

Shutdown protection.

9 LED Driver: Supply of Isolated, constant Voltage type 150 W LED Driver enclosure in Extruded

Aluminium metal enclosure . Driver shall be made in India compatible for RGBW luminaires with

silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc.

Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and

Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large

operating input voltage range of 150V to 300V AC(nominal rated voltage – 240V) with 5KV internal

surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal

Shutdown protection.

10 Supply, Installation, Testing and commissioning of Wall Mounted DMX Lighting Controller,

should be completely made in India product. The TOUCH interface Controls one universe with five

pages of scene memory and instant playback of up to 40 custom programmed scenes. 5K-20K

memory step capacity with up to 8 scenes per zone. It can be connected to PC only to program and

upload the scenes to the controller through pixelerr software. There is no mobile application for the

touch controller as it is not ethernet enabled. The pannel should have interna memory of 4Mb and

should be extendable upto 256 GB with Micro SD Card. It has DMX In/Out, DMX Merge, DMX

Trigger. It has Time Clock setting adjustable in Stand Alone ,Play Scene, Color, Speed, Dimmer,

Zones or pages, Real Time Clock and calendar for each scene (Hour, Day, Week, Month, Year). It

has IP rating of IP 40, operating at temperature between -40 to 85 °C.The controller should support

Master/Slave mode with Up to 32 devices combined and synchronized (64 universes) .The product

should be CE , LVD , RoHS certified.

Splitter: Supply, Installation, Testing and commissioning of DMX Splitter, Booster 343 mm Height

X 123mm Width X 46 mm Depth with completely made in India product .Input Power DC 12-24V

input, 100-240V, 24VDC plug-in power adaptor included Power Consumption 4.5W max and of MS/

Aluminium Housing. Power Consumption of 4.5 Approx and Weight of 1.5Kg .The output terminals

should be optically isolated from the input and share a common ground reference. All six output ports

should have an independent output driver and ELV transformer to boost the DMX signal. 1: 6 Way

DMX Splitter/Booster ,Optically isolated DMX Input/Outputs, Individual coil transformer for each

output , Surface/Rack/Floor/Celling mountable with provide mounting accessories ,Refined and

filtered data , Cable 3 core 0.75sq.mm .Five Year Warrantyof DMX Signal Splitter+Amplifier - One

DMX512 signal Input to six DMX512 outputs, Designed to amplify, distribute and isolate DMX

signals in short-runs and localised splitting scenarios. Photo-electric isolation between Input and

Output terminals as well as between output terminals among channels. Compensates for any

intereference from external sources like AC lines, Electrical equipment operating close to DMX

transmission lines.Compact DIN rail enclosure enables easy installation inside most enclosures.

Digitally signed by JAYA

S.No Item of Work Unit Quantity Rate Remarks

Supply, Installation, Testing and commissioning of DMX Decoder completely made in India product

.Input Power DC 12V -24V input which Outputs 6A/Channels. 100-240V, 24VDC plug-in power

adaptor .The number of devices controlled from 001-512 via DIPSwitch. Connection of DMX (3 pin,

3.5mm pitch screw terminal). Channel bondin capable up to 10A. 8 pin terminal connector current

LED connection. Compact PCB or chassis mounted.All six output ports should have an independent

output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster

,Optically isolated DMX Input/Outputs, Individual coil transformer for each output ,

Surface/Rack/Floor/Celling mountable with provide mounting accessories ,Refined and filtered data , Nos 10 19,175.00 1,91,750.00

Cable 3 core 0.75sq.mm .Five Year Warrantyof DMX Signal Splitter+Amplifier - One DMX512

signal Input to six DMX512 outputs, Designed to amplify, distribute and isolate DMX signals in short-

runs and localised splitting scenarios. Protection of short circuit, Reverse Polarity, Over Temprature,

Over Voltage and Over Current. Photo-electric isolation between Input and Output terminals as well

as between output terminals among channels. Compensates for any intereference from external

sources like AC lines, Electrical equipment operating close to DMX transmission lines.Compact DIN

rail enclosure enables easy installation inside most enclosures.

13 Supply, installation, testing and Commissioning of 5Core S Type 5C DMX Connecter. Nos 44 1,917.50 84,370.00

14 Supply, installation, testing and Commissioning of 2Core T Type 2C DMX connecter. Nos 20 1,917.50 38,350.00

15 Supply, installation, testing and Commissioning of 5Core T Type 5C DMX connecter. Nos 16 1,917.50 30,680.00

16 SITC of 5 core DMX cable comprises twisted pairs with shield support for carrying of data.

DMX512 cable is used for connecting all light consoles that use DMX 512 standard data Mtrs 300 306.80 92,040.00

transmission. (As per actuals depending upon the site condition)

17 SITC of PVC insulated multi core electrical un armored flexible 5C x 0.5Sq mm power cable having

less electrical losses. (As per actuals depending upon the site condition)

18 SITC of PVC insulated multi core electrical un armored flexible 3C x 1.5Sq mm power cable having

less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands

copper conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site

19 SITC of PVC insulated multi core electrical un armored flexible 3C x 2.5Sq mm power cable having

less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands

copper conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site

condition)(Make: Polycab and Quevalent)

Lighning Conductor

Providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lighing conductor

complete as required (For Horizontal Run) - (As per Item No. 6.7 E&M DSR 2022)

21 Providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lighing conductor

complete as required (For Vertical Run) - (As per Item No. 6.8 E&M DSR 2022)

22 Providing and fixing of lightning conductor finial, made of 25mm dia. 300 mm long, G.I tube, having

single prong at top, with 85 mm dia 6 mm thick G.I base plate including holes etc. complete as each 6 518.00 3,108.00

required. (As per Item No. 6.2 E&M DSR 2022)

Sub Total 47,80,878.80

Digitally signed by JAYA

Abstract - Area Lighting (Electrical Work)

Sl No. Item of Work Qty Unit Rate Amount

A. External Lighting Fixture

1 Double Arm Street Lights:

Supply, erection, testing & commissioning of road lighting HDG Octagonal Pole

conforming to IS 875 and BS EN ISO 1461 & 410 SP 33 of 10 meter with base plate

drilling of 1" dia hole on the upper portion of the pole for the installtion of street light

and 1" dia hole on the lower portion of the pole for entry of the wire Base pole paintng of

red oxide and two coats of black enamel paint. The poles shall have extra provided and

fixed with 4'x2' dia being erected by laying 5'x2'x2' (length, breadth and width) cement

concrete block in the ratio 1:3:6 and block be continued up to 1 feet above the ground

level i.e 4 feet below ground level including surface plastering the job including

excavation of pole with 4 feet deep and refilling the same after installation of the pole

and with holes at top of the pole for fixing ring type Double armed GI braket for the

installation of the 2nos integral flood light luminaire of 100 watt. The Dust and wheather 4 Nos 60,180.00 2,40,720.00

proof gasket using for 250mmx 200mmx 150mm deep box nominal size of 16 SWG

thick MS sheet cable looping box with the existing pole with MS clamp made out of

25mmx3mm thick flat iron with suitable nuts and bolts complete with hinged cover and

locking screws earth studs neoprene gasket suitable for Nos 4 pole mounted including

supply and fixing one no 6 Amp MCB carrier with base and 4 way 60 Amp terminal

block suitable to receive PVC armoured cable fixed on suitable size Baketillte sheet base

complete connection through GI pipe (classB) 40 mm dia Nominal 1.5 mtr length along

the pole or protection of underground cable (on vertical run) with painting all complete

as the direction of EIC.

2 Flood Lights

Supply, Installation,Testing & commissioning of IP-67, LED round flood Light of 40

watt LED luminairs & Basewith Brick Masonry work (200x200x200)mm for the above 4 Nos 18,290.00 73,160.00

fitting as per EIC of approved make including with all materials & labour.

Supply, installation, testing & commissioning of 11W STATIC COLUMN Bollards

Light with other necessary arrangements like Pedestal & connector etc.

B. Panels, MDBs, DBs. MCBs

4 External Feeder Pillar for External Lighting

Design, Supplying, Installation, testing and commissioning of 415 V feeder pillar panel

compartmentalised, factory made Godrej Almira type suitable for outdoor installation,

made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof

canopy of top, double door construction, IP 54 protection, anti corrosive chemical

resistant paint with, automatic dawn and dusk with astronomical controller for street

light outgoing, , complete with Aluminium bus bars, inter-connection with solid/

stranded copper conductor wires/ copper strips, glands neutral links, etc., and mounted

with following switch gears, etc., complete as required with detailed specifications: ,

energy saver for automatic switching ON/OFF as per pre-sets time cycle, digital

multifunctional meter and suitable CT etc., including concrete pedestal and associated

Busbar-200 Amp Al busbar with neutral bus SC rating of 25 KA suitable for operation

at 415 Volt, 50 Hz, 3 Phase supply

One (1) - 100A,TPN, 25KA, MCCB Incomer

One(1) set of – 100/5A , 15VA , CL 1.0, CT

One Set ON/OFF Indicating lamp with control fuse/ MCB.

one set of Contactor & Digital Timer with incomer side.

4 Nos - 32 Amp TP MCB Outgoing

4 Nos - 16 Amp DP MCB Outgoing

1 No.s - 16 Amp DP MCB with 6/16 Amp socket outlet with 10 Amp modular switch

and 1 No- Bracket Holder with 6 Amp Modular switch.

PANEL AS ABOVE 1 Set 1,62,415.20 1,62,415.20

C. Cables, Cable Laying & End Termination

5 Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size

suitable for 415 Volt, 3Ph, 50 c/s supply.

6 Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of

1.1KV grade of following size in the existing RCC/ Hume/ Metal pipe as required.

TERMINATION OF CABLES

Supply & Making end Termination with brass compression gland and Cu/aluminium

lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)

Digitally signed by JAYA

Sl No. Item of Work Qty Unit Rate Amount

8 Providing, fixing and laying of following dia HDPE/ DWC pipe (medium class) in

ground complete with fitting including trenching (75 cm depth minimum) and refilling

as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail free after sales service

within warranty period for acceptance of materials.

9 Earthing with Copper earth plate 600mm x 600mm x 6mm thick ISI marked with

accessories and providing masonary enclosure with cover plate having locking

arrangment and watering pipe of 2.7 meter long etc, with charcoal/ coke and salt as

10 Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections

etc. as required as per direction of Engg.-in-Charge.

11 Supply, Excavation and Fixing of Coil earthing to the Lighting Pole. 28 Nos 354.00 9,912.00

12 Supplying & fixing cable route marker with 100mm x 100mm x 50mm thick GI plate

with inscription there on, bolted/ welded to 35mm x 35mm x 6mm angle iron, 600cm 10 No 508.00 5,080.00

long and fixing the same in ground as required.

Total (E.I. works): 10,19,201.00

Digitally signed by JAYA

Abstract - Security Room (Electrical Work)

Sl.No. Description of work Unit Qnty. Rate Amount

Circuit Cum Wiring

1 Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point

with 1.5 sqmm FR PVC insulated copper conductor single core cable in

surface / recessed 1.6 mm thick PVC conduit with modular switch and

earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor

single core cable including providing modular box with cover of requisite

number of modules including providing cover plates as required.

2 Supplying and fixing 6 Amp Socket with 6 Amp switch (Modular Type)

on existing board.

3 Supplying & fixing suitable size GI Box with modular plate and cover in

front on surface or in recess, including providing and fixing 2Nos 3pin 5/6

amps modular socket outlet and 2Nos 5/6 amps modular switch etc. as

4 Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards

consisting of a 16 Amp clip-in type modular switch with indicator and a

6/16 Amp clip-in type modular shuttered plug socket fixed on metallic Nos 6 586.00 3,516.00

concealed box including interconnections and making good the damages

caused complete as required and as per direction of Engineer-in-charge.

5 Supplying, installation, testing & commissioning of 25 Amp AC starter

switch with 25 Amp modular socket outlet with 25 Amp Plug on surface

or in recess, on 2 Nos two module GI box with plate etc. complete with

direction of Engineer-in-charge.

6 Wiring for circuit/ submain wiring along with earth wire of following size

of FRLS heavy gauge PVC insulated copper conductor single core cable

in heavy duty PVC conduit laid in surface/ recess as required.

a) 2X2.5 + 1X2.5 sqmm FRLS Cu wire Mtr 100 275.00 27,500.00

b) 2X4 + 1X4 sqmm FRLS Cu wire Mtr 60 334.00 20,040.00

c) 2X6 + 1X6 sqmm FRLS Cu wire Mtr 60 439.00 26,340.00

Fan & indoor Fixtures

7 Supplying, installation, testing and commissioning following type of light

fixtures with dummy box for surface mounted fixtures only, fans and

exhaust fans with all accessories, as required.(The colour temprature for

fixtures shall be above 3500 deg K & white in colour as per application)

a) Recess Mounted LED Light fitting (1800 Lumen/ 18 W, CRI not less

than 80,CCT of 5700 degree K) consists of white powder coated , die-

cast Alluminium housing with high quality frosted diffuser for glare-

free uniform lighting distribution.

b) Supplying and fixing call bell/ buzzer suitable for single phase,230 V,

complete as required.

c) Supplying, installation, testing and commissioning of 400mm sweep

metal body wall fan including wiring etc as required.

Design, Supplying, Installation, testing and commissioning of 415 V

feeder pillar panel compartmentalised, factory made Godrej Almira type

suitable for outdoor installation, made up of CRCA sheet steel of

thickness not less than 2 mm with a weather proof canopy of top, double

door construction, IP 54 protection, anti corrosive chemical resistant paint

with Aluminium bus bars, inter-connection with solid/ stranded copper

conductor wires/ copper strips, glands neutral links, etc., and mounted

with following switch gears, etc., complete as required with detailed

specifications: including concrete pedestal and associated civil works.

One (1)-Incomer feeders each comprising of

One (1) - 160A,TPN, 25KA,MCCB

One(1)- Multifunction digital meter suitable for three phase four wire

system, unbalanced loading CL 1.0, flush mounting with Voltage,

Current, pf. KW, KWH, KVA, KVAr, KVAh, KVArHr

Digitally signed by JAYA

Sl.No. Description of work Unit Qnty. Rate Amount

One set - Indicating lamp for ON/OFF/Trip and Phase indication with

control fuse/ MCB.

One(1) set of 160/5A ,15VA , Cl 1.0, CTs.

Busbar -200 Amp Al busbar with SC rating of 50 KA suitable for

operation at 415 Volt, 50 Hz, 3 Phase supply

Two (2) - Outgoing Feeders (For 1No for light feeder panel and One

is spare) each comprising of

One (1) - 100A,25KA TPN MCCB

Four (4) - Outgoing Feeders (For 1No for Security room and Three

spare) each comprising of

One (1) - 63A,FP, 10KA,MCB

Four (4) - Outgoing Feeders (For spare) each comprising of

One (1) - 32A,DP, 10KA,MCB

*The Switchboard shall be complete with all interconnections, risers,

internal wiring, labels, control/circuit fuses or MCB, Space heater,

internal lighting & Thermocouple etc. complete as required.

PANEL AS ABOVE Set 1 1,73,392.74 1,73,392.74

9 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator). (For all Floors LDBs, PDBs, ACDBs &

a) 4 way, Single/Double door(4+12) Each 1 6,028.62 6,028.62

10 Supplying and fixing following way, single pole and neutral,sheet steel,

MCB distribution board, 240 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

a) 12 way, Single/ Double door Each 2 2,315.00 4,630.00

11 Supplying and fixing following rating MCBs/ Isolator in the existing

MCB DB complete with connections,testing and commissioning etc. as

required. Make:- ABB/ Legrand/ Havells

a) 63 Amps, FP 10 KA MCB (C-Curve) Each 1 3,701.66 3,701.66

b) 32 Amps, DP 10 KA MCB (C-Curve) Each 2 656.00 1,312.00

c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 22 256.00 5,632.00

12 Supplying and fixing of following RCCB in the existing MCB DB in the

existing MCB DB complete with connections as per direction of Engg.-in-

a) 63Amps 4P 415 volts RCCB 30 mA Each 1 2,872.00 2,872.00

Cables, Cable Laying & Termination

13 Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power

cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.

14 Laying of one number of PVC insulated and PVC sheathed / XLPE power

cable of 1.1KV grade of following size direct in ground including

excavation, sand cushing, protective covering and refilling the trench etc.

b) Above 95sqmm and 185sqmm Mtr 70 422.00 29,540.00

15 Laying of one number of PVC insulated and PVC sheathed / XLPE power

cable of 1.1KV grade of following size in the existing RCC/ Hume/ Metal

pipe as required.

a) Upto 35 sqmm Mtr 20 37.00 740.00

b) Above 95sqmm and 185sqmm Mtr 30 77.00 2,310.00

TERMINATION OF CABLES

16 Supply & Making end Termination with brass compression gland and

Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv

grade (without cost of Cable)

Digitally signed by JAYA

Sl.No. Description of work Unit Qnty. Rate Amount

17 Providing, fixing and laying of following dia HDPE/ DWC pipe (medium

class) in ground complete with fitting including trenching (75 cm depth

minimum) and refilling as per direction of Engg.-in-Charge. Ncessary test

report & Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free after sales service within warranty

period for acceptance of materials.

18 Earthing with Copper earth plate 600mm x 600mm x 6mm thick ISI

marked with accessories and providing masonary enclosure with cover

plate having locking arrangment and watering pipe of 2.7 meter long etc,

with charcoal/ coke and salt as required.

19 Providing and fixing 25mm x 5 mm copper strip on surface or in recess

for connections etc. as required as per direction of Engg.-in-Charge.

Digitally signed by JAYA