REPLACEMENT OF FLOOR TILES IN CERTAIN ROOMS IN BUILDING NO P15 AND ADDITION ALTERATION TO ROOF CEILING AND PARTITION WALLS IN BUILDING NO 114 AT DHQ3 NEW MANGALORE UNDER GE (I) (CG) GOA

Amount

SCH 'A' PART-I (B/R PORTION) Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Dismantling of Plain or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings Complete all as specified and directed

M & L Plain Cement concrete 1:2:4 type B1 (using 20mm size graded crushed stone aggregate) as in wall or retaining walls, any thickness, size or shape including plasters, buttresses columns, pillars, boundary pillars and posts and mass concrete complete all as specified and directed.

S & F Rolled steel sections as Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410W (Gde E-250) complete all as specified and directed

S & F Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom of GI pipe complete all as specified and as directed conforming to Fe-410W complete all as specified and directed

M & L two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed

S & F Brands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large haps and staples; chains, hand made sliding bolts, clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way straps, plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed

S & F High density polyethylene pipes 50 mm bore of pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc) complete all as specified and directed.

Demolition of brick/stone masonry built in cement mortar in any position complete all as specified and directed .

M & L dressed laterite stone masonry, walling of regular coarsed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:6 on fair faces of stone masonry surface is to be finished even and smooth without using extra cement complete all as specified and directed

M & L applying 2 coats of white wash on newly plastered surface of wall complete all as specified and directed

M & L Plain cement concrete (1:2:4) type B-O (using 12.5 mm graded crushed stone aggregates) as in benching, copings, bed plates and the like including necessary form work and finishing all exposed surfaces of concrete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.

M & L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as levelling course complete all as specified and directed.

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in cement mortar 1:6 including dismantling the old unservicable floor tiles complete all as specified and directed.

M & L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick backing plaster in cement mortar 1:4 complete all as specified and as directed.

S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed.

M & L veneered decoratie Plywood, grade-1( with BWR rasin) with decorative face veneered both faces fixed with screws to timber frame 9 mm thickness for partition & frame work will be carried out by plywood finished with laminate including all finishing works and complete all as specified and directed.

S & F powder coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

M & L preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of Oil emulsion distemper over one coat of alkali resistant priming paint complete all as specified and directed.

S & F Anodised aluminium snap grid frame work with size of grid 605mm x 605mm for false ceiling complete all as specified and directed

S & F Hanger 6 mm dia G.I (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed

M & L 8mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed

M & L preparing new surfaces plastered or unplastered three coats of white wash on ceiling complete all as specified and directed.

Taking down shutters exc 2sqm and n.exc 4.5sqm each complete all as specified & directed.

Refixing in the same opening shutters of any description exceeding 2 Sqm but not exceeding 4.5 Sqm each complete all as specified and directed.

SCH 'A' PART-II (E/M PORTION) M & L point wiring with 1.5 Sqmm multi stranded FRLS PVC insulated unsheathed copper conductor cable in and including PVC consealed conduit medium duty adequate size for one light of fan point controlled by one switch on plastic laminated sheet 3mm thick, MS/CI sunken box including PVC insulated unsheathed 1.5 Sqmm copper conductor continuous earth wire and piano type switches complete all as specified and directed.

All as per item No 30 hereinbefore but for 3 pin socket outlet 5A on same board,

S & F Switch piano, Flush type, single pole, one way 5/6 Amps complete all as specified and directed.

S & F socket outlet, flush type, 3/5 Pin,AC, 230 Volts, 6 Amps complete all as specified and directed.

S & F ceiling fan 230 volts 1200mm sweep 370 RPM Anti dust fan with metalic finish complete all as specified and directed.

S & F modular Fan five stepped type regulator, ISI marked - 2 module complete all as specified and directed. Make: Ancor Roma Cat No. 20507, Cona Trump Cat No. 15126 or similar in make as mentioned in Particular specification.

All as per ser item No 30 here in before but with 2.5 sq mm PVC insulated copper conductor cable FRLS including 2.5 sq mm FRLS PVC copper conductor used as earth wire for one 3 pin socket outlet 16 Amps on independent board complete all as specified and directed.

S & F white cover plate with frame and metal flush box, 8 module complete all as specified and directed.

S & F Recess mounted LED 12W down light with white powder coated polycarbonate housing and pressure die cast heat sink having high effeciency complete all as specified and directed. Make Havells model EDGEPRODDLR12WLED840S or similar in make as mentioned in Particular specification.

S & F switch socket combination 3 pin 16 A,flush type complete all as specified and directed.

M & L for sub main wiring using two single core PVC insulated cable FRLS 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable FRLS using as earth wire drawn through in PVC conduit complete all as specified and directed. [Note: 2 run of 4.0 sqmm main wire, one run of 4.0sqmm earth wire and necessary PVC conduct with accessories will be measured as one run for payment]

M & L for sub main wiring using two single core PVC insulated cable FR 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable FR using as earth wire drawn through PVC conduit complete all as specified and directed. [Note: 2 run of 6.0 sqmm main wire, one run of 6.0sqmm earth wire and necessary PVC conduct with accessories will be measured as one run for payment]

S & F distribution board in sheet metal enclosure, powder coated, factory made, IP 43 protection, SPN 8 way complete all as specified and directed. Make :DHDMSHODDWO8 or similar in make as mentioned in Particular Specification.

S & F of MCB SP 6-32 Amps 'C' series AC 230 Volts complete all as specified and directed.

L A Constructions