PROVN OF TOILET BLOCK FOR OTM ACCN AT NO 1 INF BN AT UDAIPUR MIL STN

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil all as specified.

Excavation in trenches n. exc. 1.5 M wide and n. exc. 1.5 M in depth & getting out in hard soil.

Material & Labour cement concrete in foundation filling incl mass concreting PCC (1:4:8) type D-2 using 40mm graded stone aggregate.

Returning, filling in incl spreading leveling, watering and well ramming in layer n.exc 25cm in layer in soft/loose soil.

Material & Labour for formwork to sides and soffits of plinth beam, sides of footings, bass of columns and similar work with rough finished surfaces etc.

Material & Labour for formwork to sides of columns and similar work with rough finished surfaces etc.

Material & Labour for formwork to sides and soffits of beam, lintel rough finished surfaces etc.

Material & Labour for form work to soffits of suspended slabs, such as roof slabs and similar work; not exc. 200 mm thick for flat rough finish surfaces.

Formwork to chajjas including edges flat rough finished surfaces of concrete

Formwork to edges of concrete flats and similar works exc. 10 cm & not exc. 20 cm wide with rough finished surfaces etc.

Material & Labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in footings & plinth beams etc.

Material & Labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in columns etc.

Material & Labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof beams & lintel beam etc.

Material & Labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in chajjas

Material & Labour RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof slabs supported on walls etc.

Material & Labour mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia.

Material & Labour mild steel TMT bar 8 mm dia and over up to and including 10 mm dia in stirrups, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia.

Material & Labour brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6.

Material & Labour for brick work with sub-class `B' bricks built in CM 1:4, straight or curved on plan exceeding 6 M mean radius using old size bricks in half brick thick wall etc.

Material & Labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6

Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame for and including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ TD -219 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Material & Labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed

Material & Labour rendering 5 mm thick in CM 1:4 on concrete surface of ceiling & finished even & smooth without using extra cement.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

Material & Labour coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material & Labour coloured Glazed ceramic tiles in vertical serfaces 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, complete all as specified and directed.

Material and labour for Udaipur green marble polished in bathroom corner shelf, window cill and counter top for wash hand basin, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of green marble stone including half round moulding etc.

Material & Labour for 18-20 mm thick Granite (Z black) slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing and half rounded at one corner complete all as specified and directed.

Supply and fixing solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc.

Supply and fixing PVC factory made shutter solid, PVC moulded prelam coloured on both side door shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings.

Supply and fixing 4mm figured glass, and glazing with oil putty in square n exc 0.5 sq. m in each pane on metal surround complete.

Supply and fixing aluminium handle size & shape as per existing handle for aluminium door or 150 mm long etc. all as directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

Supply and fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed .

Supply and fixing for stainless steel wire cloth, 0.36mm nominal dia of wire average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Supply and fixing vitreous china wash down water closet (pedestal pattern) white with integral foot rests with ‘P’ or ‘S’ trap including provn of lime concrete bedding .

Supply and fixing plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device

Supply and fixing vitreous china IWC Orissa pattern white size 580 x 440 mm with integral foot rests with ‘P’ or ‘S’ trap including provn of lime concrete bedding .

Supply and fixing vitreous china half stall urinal with grating, union and cp spreader complete set with 40 mm dia GI light grade waste pipe incl. brackets etc

Supply and fixing CP jet spray with flexible tube etc complete all as specified & directed. Make: (Coronet/JAL/Prayag)

Supply and fixing urinal spreader chromium plated for fixing with 15 mm bore pipe etc. Make: (Coronet/JAL/Prayag)

Supply and fixing PVC low level flushing cistern 10 litre capacity including PVC bend pipe handle & Float Value, brackets etc all as specified.

Supply and fixing Vitreous China W.H.B. white oval type counter below type of size 570 x 445 mm, waste pipe and brackets etc.

Supply and fixing 5mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. (Make: Jaquar Essco/Prayag/Plumber/Jal)

S/F waste coupling chromium plated size 32 mm with long thread. (Make: Coronet/JAL/Prayag)

Supply and fixing 15mm bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. (Make: Jaquar Essco/Prayag/Plumber/Jal)

Supply and fixing in repair 15mm bore angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge. (Make: Jaquar Essco/Prayag/Plumber/Jal)

Supplying and fixing 15mm bore two way angle stop cock brass CP type complete all as specified and directed. (Make: Jaquar Essco/Prayag /Plumber/Jal)

Supply and fixing chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. (Make: Jaquar Essco/Prayag/Plumber/Jal)

Supply and fixing aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed.

Supply and fixing low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long of pressure rating 6 kg/cm² including brass union and washer ateach end, one end screwed to inlet of piller tap/cistern and other end to stop cock etc complete all as specified.

Supply and fixing brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge. (Make: Jaquar Essco/Prayag/Plumber/Jal)

Cutting existing water steel tubing 20mm bore galvanized iron pipe for alterations and provision for branch connection by inserting tee union elbow etc. complete all as required at site.

Screwing existing steel tubing 20 mm bore for alteration or additions etc all as specified

Material & Labour CPVC tubing 15 mm dia medium grade galvanized with all fittings and fixed complete to brick/stone wall or laid in floor concealed. (Make: Astral/Prayag/Finolex/Ashirwad)

Material & Labour CPVC tubing 20 mm dia medium grade galvanized with all fittings and fixed complete to brick/stone wall or laid in floor concealed dia. (Make: Astral/Prayag/Finolex/Ashirwad)

Supply and fixing gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as specified and directed. (Make-Zoloto/NMC/Leader).

Material & Labour PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed .

Material & Labour Cast iron floor trap 75/110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed .

Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

Supply and fixing PVC (SWR) bends any radius 75mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) bends any radius 110mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed .

Supply and fixing PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed .

Supply and fixing PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) vent cowl 75mm dia complete all as specified and directed .

Supply and fixing PVC (SWR) vent cowl 110mm dia complete all as specified and directed .

Supply and fixing stack clamps out of 40mm by 4 mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/75mm bore etc all as specified.

Supply and fixing in repair rotational molded polyethylene water storage tanks white in colour, tripple layered with threaeded lid/cover, weight of tank should not be less than 36.00 Kg (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. (Make:- Sintex/ Rotex/ Polycon/Vectus)

Supply and fixing 20 mm PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed. (Make-Prayag/Polytuff)

Material & Labour two coats of oil bound distemper (acrylic) white or tinted over 1 mm thick Asian/Birla/JK wall putty including preparation of new pastered surfaces of walls etc.

Material & Labour for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

Material & Labour two coats of oil bound distemper (acrylic) white or tinted over 1 mm thick Asian/Birla/JK wall putty including preparation of new pastered surfaces of ceiling, complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of wall and applying 1 mm thick external weather coat putty in two layers for neat and smooth finishing including preparation complete all as specified. external weather coat putty Make: Asian/Birla/JK

Preparing new surfaces of walls and applying two coat of Acrylic exterier emulsion paint complete all as specified and directed. Make: Asian Paints (Brand- Ace) / Berger Paint (Brand- Walmasta) / Nerolac paint (Suraksha Plus)

Supply & fixed Powder coated aluminium window/ventilator shutter with frame fixed/sliding type aluminium section weighing not less 0.55 Kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified.

Supply & fixed for powder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel all as specified and directed.

Supply & fixed 4.8 mm thick plain or tinted glass, ordinary quality and glazing rubber beading in square n exc 0.5 sqm in each pane complete

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.

Material & Labour PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding & filling depressions etc & to maintain certain desired slopes. Including demolition.

Material & Labour for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer's instrutions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

Material & Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs-

(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. Make: as per APP membrane

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame as per manufacturers instruction. make: (M/s STP Ltd / M/s Texa india Ltd/ M/s IWL Ltd)

(d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

Material & Labour for removing excavated material not exc. 50 m and depositing in soft/hard soil, where directed.

Material & Labour PCC (1:3:6) Type C-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete and sub base surface finished even & fair complete .

Material & Labour Sand filling under floors or in foundations including watering and consolidation, spreading under stone/bricks aggrgate alround the LT panels/Feeder Pillars,cable laying etc.

Material & Labour Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in fixing to hold fast, coping, apex stone, bed plate, plinth course and like finished fair and even, including necessary form work complete asll as specified and directed.

Material & Labour for machine pressed precast concrete coloured or plain interlocking paver block rubberised any shape & size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & pigment complete all as specified.

Excavating over area not exceeding 1.5 meters deep and getting out in hard/dense complete all as specified and directed.

Material & Labour for plain Cement concrete 1:2:4 type B-1 using (20mm graded stone aggregate) as in coping, benching channel to manholes etc including necessary form work complete.

Material & Labour for Precast cement concrete 1:2:4 type B-1 (Using 20mm graded stone aggregates as in manholes cover slabs and set in cement mortar 1:4 complete.

Material & Labour for reinforced cement concrete (design mix) type M-25 ( 20mm graded stone aggregate ) as in manhole slabs supported on walls and in shelves and the like etc.

Material & Labour for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 200mm bore of pipe plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) complete.

Material & Labour Reinforced concrete pipes 200mm dia, class NP2, laid & jointed complete with collars

Material & Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch.

(a) One light point controlled by one 5 Amps switch

(b) One Fan point controlled by one 5 Amps switch

(d) One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size

(c ) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.

Supply & Fixing lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal

Supply & Fixing LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. Make: Phillips/Havells/Bajaj

Material & Labour MCB SPN DB sheet metal enclosure single door suitable for mounting MCB 240 Volts with busbar 4 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard

Supply & Fixing MCB SP 230 Volts 6- 32 Amps. Make : Havells/Legrand/Standard/ C&S

Supply & Fixing MCB SPN 230 Volts 40 Amps. Make : Havells/Legrand/Standard/ C&S

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4core

Material and labour for stone slab ( patti) roughly hammer dressed stone 25 to 35 mm thick 25 to 30 cm wide and not less than 60 cm long laid dry and abutting each other with gap between adjacem,ent salb not exceeding 10 mm over underground cables for protection.

Supply & Fixing exhaust fans AC single phase 230/240Volts of size 200 mm sweep with louver and complete accessories ,including making hole with suitable size for Exhaust Fan, after completion of work, finishing with cement and plastering and repainting with exisitng color all as specified and directed by Engr-in-charge.

M/s Ajay kumar Garge

naveen enterprises