SPECIAL REPAIR TO ROOF AND FALSE CEILING OF KALPATRU BLDG, ADDN/ALTN TO BLOCK NO 9, RENOVATION OF TOILET (ADG-A) AT DGNCC CAMP AND RENOVATION TO PANTRY AND STAFF HALL OF BLDG NO T-78 AT RPSO COMPLEX UNDER GE (EAST) DELHI CANTT-10

Amount

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing GI sheet corrugated or semi corrugated as in roof coverings complete.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing GI sheet corrugated, semi corrugated or plain as in roof coverings complete.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including dismantling of existing steel work of any type complete.

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, two coat of OBD over one coat of primer and 2-3mm wall care putty of JK/Birla including dismantling of old UNSV false ceiling of any type with frame complete.

M & L two coats of synthetic enamel paint to old steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L two coat of synthetic enamel paint over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for Pre-polished, coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 20-22mm thick, set & jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of tiles in floors/path etc over and including 20 mm thick screed bed in cement mortar 1:6, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed.

M & L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing including demolition of existing PCC thkness n.exc 15cm completed all as specified and directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished fair and even without using extra cement in any position incl scafolding etc, complete all as specified.

M & L for Preparation of newly plastered internal surfaces of walls/ceilings and applying a layer of 2mm thick Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applying Two coats of Oil Bound Distemper over a coat of wall primer, complete all as specified and as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with wall care putty and applying One coat of Oil bound distemper complete.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with wall care putty and applying One coat of exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing from site complete all as specified and as directed.

S & F Aluminium alloy powder coated windows including aluminum powder coated frames three track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S & F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete.

S&F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S&F Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 and dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 and dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 and dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

M & L for 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 15 mm thick screed bed in CM 1:4 and rounding to edge of granite as required including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.

M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick rendering in CM 1:4 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 complete all as specified.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.

M & L for Preparation of newly plastered external surfaces of walls upto 4 storied buildings and applying 2mm thick of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint over a coat of primer, complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S & F vitreous china wash basins , flat back size 550x400 mm white excluding taps,waste coupling and pipe but including brackets all as specified and directed.

Vitreous china urinal (White/Off White) type size (Fullstall)420 x395 x635mm incl all fixing accessories, fixed in repair complete.

S & F Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

S & F Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, health faucet flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).

S & F Angle valve of CP high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete (Make: Jaquar/Marc/Kohler)

S & F 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)

S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete (Make: Jaquar/Marc/Kohler)

S & F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe complete all as specified and as directed.

S & F CP toilet paper holder fixed with plug and brass screws, complete (Make: Jaquar/Marc/Kohler)

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe complete all as specified and directed.

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F in repairs Sinks without drain board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm all as specified and directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering CM (1:4) and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63

S&F in repairs Kitchen mixer of cast copper alloy , fancy type , chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Hindware cat part No. F280020CP or equivalent in Jaquar/Marc/Cera).

S & F in repairs angle valve of CP high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete (Make: Jaquar/Marc/Kohler)

S & F in repairs 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs PVC (SWR) Floor/Nahani trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

PVC in repairs (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed in walls complete all as specified & directed.

PVC (SWR) in repairs 110mm bore junction double, (double T), equal or unequal with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) 110mm bore bends with access door, complete all as specified and directed.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete (Make: Jaquar/Marc/Kohler)

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S & F in repairs Stainless steel Grating dome 125mm dia with or without hole for waste pipe complete all as specified and as directed.

Fabrication & fixing of Modular wardrobe/ Kitchen cupboard made out of 18-20 mm thick HDHMR boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc. complete all as specified and as directed. (Design and pattern as approved by GE). (Make: Action Tesa/Century/ Greenply/Kitply/Archid)

S & F for 18-20mm thick HDHMR boards 2.00mm with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make: Action Tesa/Century/ Greenply/Kitply/Archid)

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

S&F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.

S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed

M&L 4mm thick desginer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing false ceiling with frame complete all as specified and directed.

All same as per srl item No 4 here-in-before but excluding dismantling.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified and as directed.

S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

S & F in repairs Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, health faucet flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).

S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete (Make: Jaquar/Marc/Kohler)

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring from surface conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.

M&L point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20mm dia medium grade and PVC conduit fittings such as tees, bends, couplers etc including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl new Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size in and and making good surface as original complete all as directed for the following. Note: Wiring to be done upto the height of min 4 meter for fan and LED panel and rest is at standard height.

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

All as per srl item no. 79 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire

S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.

S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.

S&F of Modular Fan regulator step type, 120 watts, 1 Module size complete all as directed.

S&F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S & F in replacement of MCCB, 415 volts, three pole of cap 125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of isolator 63 Amp, SPN complete all as directed.

S&F of change over switch off load type, AC, 415Volts, TPN, 100 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed.

S&F in replacement of LED bulk head fitting 9Watt with opal glass diffuser , complete all as specified and as directed.

S&F in replacement of wall light fitting comet type with and including 9 watt LED lamp complete all as specified and as directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing ceiling fan complete with blades, down rods, regulator operated and accessories, 230 V, 1200 mm sweep with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and as directed and depositing the old u/s to MES store yard.

S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz Oscillting type complete all as specified and as directed.

Supply and fixing exhaust fan upto 450 mm sweep metalic body type heavy duty industrial type and making all electric connections complete all as specified and as directed and depositing the old u/s to DGNCC store yard.

S&F in replacement ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

M&L in replacement of PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable, FRLS,complete all specified and as directed.

Material and labour in replacement of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Material and labour in replacement for Sub main wiring with 2 run of 16 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, drawn in and including 25mm dia PVC concealed conduit medium grade with and including 16.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main db complete all as specified.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring in concealed conduit (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches/sockets/fan regulator etc , with and including hylem sheet 3mm thick (cover plates) of suitable size and making good surface as original complete all as directed for the following :-

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

All as per srl item no. 110 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp light point.

S & F for switch piano, flush type single pole, one way 5 Amp complete all as directed.

S & F for switch piano, flush type single pole, one way 15 Amp complete all as directed. Make Anchor/Cona/Havells/SSK

S & F for of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.

S&F of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections, complete all as specified and as directed.

Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.

Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing of isolator 32 Amp, SPN type complete all as directed.

Supply and fixing of flexible LED tubelar light strip, cool/warm white,and making all electric connections complete all as directed.

Supply and fixing of adopter AC to DC suitable for tubelar LED light .complete all as specified and as directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in and including 20mm dia PVC concealed conduit medium grade with all fittings and including 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB . complete all as specified and as directed.

Supply and fixing PVC ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.

S&F of Geyser 25 litre capacity (FIVE STAR RATED) vertical type with steel tank and glass inner linen complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock complete all as specifed and as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing in replacement of isolator 32 Amp, SPN type complete all as directed.

S&F in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections, complete all as specified and as directed.

M/s Shubh Enterprises

M/s Durga Traders

garnet engineers contractors

Vipul Construction