REPAIR TO DOOR, WINDOW, WARDROBE, BRICK WORK AT CERTAIN BUILDINGS OF AREA-III OF AGE B/R (CENTRAL) AT GE (W) COLABA, MUMBAI

Amount

Supply & Fixed in repair in ceiling mounted cloth dryer with 8ft 4Nos pipes industrial aluminium with anodiesed pipe size 22mm thickness min 1mm weight carrying capacity 10 to 20 kg with 4mm rope of triple braided nylon/polysterincluding pully and brackets, complete all as specified and directed. Make: Unik cloth dry hanger/ Easy dry or equivalent as approved GE.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each, complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each, complete all as specified and directed.

Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete all as specified and directed. Note:- Old shutter taking down from item No. 4 shall be reused.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws, complete all as specified and directed. Note:- Old shutter taking down from item No. 5 shall be reused.

Dismantaling boarding, any description, fixed in any position with nails, complete all as specified and directed.

S & F of 12 mm thick grade BER tye BB Nos of ply 7 fixed with screws to timber frame work, complete all as specified and directed by Engr-in-charge.

M&L 2nd class hardwood exc 3 & n.exc 6 Sqcm plain fillets, square, rectangular or triangular in section clean sawn, secured with nails, complete all as specified and directed.

M&L 2nd class hardwood exc 6 & n.exc 13 Sqcm plain fillets, square, rectangular or triangular in section clean sawn, secured with nails, complete all as specified and directed.

S&F for continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm, complete all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and directed.

S&F Handles 100 mm long, anodised aluminium aloy, fixed with screw, complete all as specified and directed.

S&F in repair handles 100 mm long, anodised aluminium aloy, fixed with screw, complete all as specified and directed.

Supplying and fixing 2nd class hard wood plain, solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints with M.S hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 65X125 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 65X100 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 28- 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

Supply & Fixed of 18 mm thick Both Side pre laminated HDHMR Board of any colour, Matt surface finish, grade I as per IS 14587 for frame and shutter with 18 mm wide PVC strips lipping for bardrobe/kitchen cabinets, complete all as specified and directed by Engr-in-charge.

S&F factory made 30mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround, complete all as specified and directed.

S&F 2nd class hardwood factory made door 30 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number, edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a), complete all as specified and directed.

Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 cutting exceeding half brick but not exceeding one brick, complete all as specified and directed.

S&F mild steel bends strips, hold fast or small articles of FI or angle, complete all as specified and directed.

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple, complete all as specified and directed.

S&F in repair galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple including fixed, complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane, complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and directed.

M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane, complete all as specified and directed.

S&F 300mm long aluminnium alloy sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts four on bolt plate and two on staple, complete all as specified and directed.

S&F in repair 300mm long aluminnium alloy sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified and directed.

S&F MS butt hinges cold rolled meium weight of size 100mm etc, complete all as specified and directed.

S&F SS butt hinges cold rolled meium weight of size 100mm etc, complete all as specified and directed.

S&F MS butt hinges cold rolled meium weight of size 75 mm etc, complete all as specified and directed.

S&F in repairs MS butt hinges cold rolled meium weight of size 100mm etc, complete all as specified and directed.

S&F in repair SS butt hinges cold rolled meium weight of size 100mm etc, complete all as specified and directed.

S&F in repair MS butt hinges cold rolled meium weight of size 75 mm etc, complete all as specified and directed.

M&L for Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required, complete all as specified and directed.

M&L for preparing wooden new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparing wooden old surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2010, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification and shown in drg in SSR Part -II 2010, complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.

S&F 100 mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized, complete all as specified and directed.

S&F 150 mm long aluminium alloy handle cast type anodized, complete all as specified and directed.

S & F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame, complete all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

Taking down Stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.

Material and Labour for machine cut cudappa stone slab 20-25 mm thick, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

M & L for Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of graniteflooring including 15 mm thick screed bedding in cement mortar 1:6 and all other similar works, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F in repairs Harrison rails 20mm, mild steel, chromium plated alongwith brackets, stops, rollers etc approved quality, complete all as specified and directed.

Material and Labour for complete removel old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coatsfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface authorized applicator only including use of scaffoldings, complete all as specified and directed.

All as per item No. 54 but 5th to 8th floor.

All as per item No. 54 but 9th to 12th floor.

All as per item No. 54 but 13th to 16th floor.

M&L preparing old decorated surface by complete removal of existing treatment and stopping of distempered and painted surfaces of walls and applying two coats of distemper oil emulsion white or tinted, complete all as specified and directed.

M&L preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed.

M&L preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MoD land, complete all as specified and directed.

M&L Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site, complete all as specified and directed.

Material and labour for 10 mm thick Plaster in CM 1:4 in single layer of, on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-in-Charge.

Material and Labour for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid.

S&F in repairs Aluminium composit panel sheet 3mm thick PVCF wooden finished of brand name "Euro bound/Alstrong/ Viva area fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling, column and in vertical surface, complete all as specified and directed and as approved sample as kept in GE office.

Unitech Enterprises (BID ID -3479350)

SN CONSTRUCTION (BID ID -3479027)

Nagma Enterprises (BID ID -3478121)

Anil Industrial Corporation (BID ID -3476766)

binta construction (BID ID -3480618)

Sri Krishna Construction (BID ID -3477467)

SHREE SHIV SHANKER ENTERPRISE (BID ID -3480470)

HINDUSTAN BUILDERS (BID ID -3479535)