ADDN/ALTN AND SPL REPAIRS TO SELECTED OLD OFFRS/JCOs/OR MD ACCN AT

Amount

Note:-(i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement motar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premisses complete all as specified and directed.

Demolition of lime concrete of any description and in any position complete all as specified and directed.

Taking down cement plaster of any description incl Tezzao finish as in dado/ skirting of any description on brick or stone walls etc including raning out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqmcomplete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed.

Taking down shutters and refixing of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking down of PVC rainwater pipes and waste water pipe or gas pipe (any size or pattern) in any position , including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed.

Demolition, reinforced cement concrete roofs, floors (other than ground floors), beams, staircases, landing, parapets, chajjas, and similar suspended work cut as required to facilitate demolition complete all as specified and directed.

Demolition of Brick or Stone Masonry built in cement mortar etc complete all as specified and directed.

Dismantling of AC corrugated / semi corrugated sheet as in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick & 550x550mm size over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 15mm screed bed in CM (1:6) complete all as specified and directed.

M & L for kota stone slab 18-20mm thick in riser or steps, cill single piece, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & incl necessary bull nosing where directed complete fixed over and including 10mm screed plaster in CM (1:4)complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:6) complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles 10 mm thick (square/ recangular) polished, area of each tiles exceeding, 0.18 sqm but n exc 0.36 sqm, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles 10 mm thick (square/ recangular) polished, area of each tiles exceeding, 0.18 sqm but n exc 0.36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed.

M&L machine pressed precast concrete inter locking paver block (Reflective type)in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment including 50 mm sand cushion complete all as specified and directed.

M&L for PCC in 1:4:8 typeD 2 (using 40mm graded aggregate) 75mm thick as in subbase complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate as in bedding layer for laying & fixing floor as in levelling course complete all as specified and directed

M&L for Cement concrete (1:5:10) in foundations, filling of sunken and mass-concrete etc complete all as specified and directed.

M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed

M & L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding joints etc in walls ceilings stanchions beams etc including all laps cutting and waste complete all as specified and directed.

M&L glazed ceramic colour tiles, in vertical surfaces exc 0.11 sqm but n exc 0.18 sqm, 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over 10mm thick CM (1:4) as in backing coat complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:6 on fair face of brick/ concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L 15 mm (5mm in CM 1:4 with WPC +10mm in CM 1:6 ) thick in two layers rendering on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (water proofing compound measured and paid seperately)

M & L for 10mm thick rendering on cement concrete, isolated width, chajjas and patta etc surface ,in (CM 1:3,) including necessary doubing out etc finished even and smooth (without using extra lime or cement) complete all as specified & directed.

M & L for rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces , in ceilings, chajjas, isolated width etc finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:3 on fair faces of brick work, concrete surfaces as in sunken / roof treatment finished even and smooth without using extra cement incl applying two coats of acrylic polymer treatment as per manufacturer instructions complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of wall primer over a coat of chalk whitening on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L complete removal of old decorated surface of wall and applying two coat of acrylic washable distemper over a coat of wall primer over and including one coat of white cement based putty (where it is required) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of wall primer over a coat of white cement based putty of 1 mm thick , on plastered surfaces, preparatory to distempering complete all as specified and directed.

M & L for preparing old plastered surfaces of wall incl srubbing down of existing treatment and applying one coats of white wash on wall complete all as specified and directed.

M & L for preparation of new plastered or unplastered surfaces as in ceilings and applying 3 coats of white wash complete all as specified and directed.

M&L for prepration of old ceiling surfaces, applying two coat of white wash on ceiling complete all as specified and directed.

M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed

S&F 125X60mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and directed.

M&L cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and directed.

S&F 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as cup board shutter and fixed with wooden frame-work complete alll as specified and directed

M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick wall nut colour moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F for 100mm size stainless steel butt hinge complete all as specified and directed.

S&F 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete all as specified and directed.

S&F IInd Class HW 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S & F galvanised wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F IInd class hardwood chowkats and frames in cupboard plain fillets, square,rectangular or triangular in section (exc 13 sq.cm n. exc 25 sq.cm) clean sawn, with glue, pinned at joints and fixed with screw complete all as specified and as directed

S&F Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified.

Add extra for 6mm thick external teak wood lipping 18/19mm and fixed with nails complete all as specified and directed.

S & F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed complete all as specified and directed.

S&F for ISI marked 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F for 100mm Mild steel butt hinge complete all as specified and directed.

S & F 4 lever brass Mortice lock, vertical type, size 100mm complete all as specified and directed.

S&F new single action spring hinge, 125mm size, mild steel with steel wire spring, stove enameled black fixed to angle iron door frame by welding complete all as specified and directed.

M&L Granite of 20mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20mm screed bed in CM 1:3 all as specified and directed.

S&F in Window ECO 4000, of double rebate openable/fixed window made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of 'D' quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in the Concrete/Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) etc complete as per direction of Engineer-in-Charge.

M & L for two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of red oxide, zinc chrome primer complete all as specified and directed.

S&F 50mm bore GI pipe medium gde as fixed in sleeve/spout incl necessary making hole in wall , complete all as specified & directed.

S&F 25mm mild steel chromium plated curtain rod powder coated finished complete all as specified and directed.

S&F decorative type curtain rod bracket with cap of mild steel powder coated suitable for 25mm dia rod complete all as specified and directed.

M&L for grouting of slab/beam by fixing 12mm dia PVC nozzles and pressure injection by cement slurry of 50 Kg cement mixed pidicrete SM 225 gms of M/s pidilite industries Ltd or cabex 100 of M/S Fosroc Chemicals ) with pressure not less than 3 M including necessary drilling ,nozzels ,plugging etc , as per manufacturers instructions for grouting complete all as specified and directed .

M&L for provn of water proofing roof treatment to RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/SqM of thickness not less than 3 mm having thermal; insulation with white plain mineral or gravel finish on upper side of membrane uniformely embedded during manufacturing process. All as per following specifications: (a) 10 mm thick plaster in CM 1:4 mixed with and incl water profofing compound @3% by weight of cement applied over roof slab. After the plaster is cured the roof will be tested for water tightening by ponding with water for seven days for any seepage / leakages etc. if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repired the slab will be tested for watertightness aginst before processing further treatments.

Item No. 2.74 Contd .....(b) The surface of the roof, parapet and gutters, drain mouths etc. over which water profing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners. (c) Bituminous primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm to be applied an prepared surface till the surface is properly impregnated. (d) APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer. (e) All joints & changes in direction should be curved with cement motor 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane (f) A fillet of PCC (1:2:4) type B-0 of 100 mm x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and whereever ther is a change of direction. The membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.

Topping will be done with precast machine pressed cement concrete tiles with grey cement and no pigments of size 250 x 250 x 20-22mm thick confirming to IS 1:2:3:7-1980 set in cement slurry laid jointed and pointed in neat cement slurry including bedding layer of 15mm screed in CM 1:4 complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L 20mm thick Granite (of any tpe) work (table rubbed and polished) in cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl necessary bull nosing to edging fixed over 15 mm thick Screed in CM (1:4) complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings , fixed in walls complete all as specified and directed.

Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified complete all as specified and directed.

Supplying and laying of GI tubing Dia 25mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed.

S&F 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F of ISI marked 15mm bore stop valves/angle valve concealed fancy type cast copper alloy, chromium plated with long shank and cup , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F of ISI marked 15mm bore stop valves/angle valve cast copper alloy fancy typechromium plated , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing for ISI marked 15mm bore, fancy type bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

S & F for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F brass chromium plated tubular towel ring complete all as specified and as directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F in repair for vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F 15mm bore fancy type cast copper alloy chromium plated mixer for mixing hot & cold water with crutch handle of approved quality for Kitchen sink complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) complete all as specified and directed.

Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed.

S&F Toilet paper holder chromium plated fixing complete all as specified and directed by engr in charge.

S&F handshower (Health faucet) with 8mm dia flexible tube and wall hook fixed in repairs complete all as specified and directed.

S&F 15 mm Pillar taps, cast copper alloy, chromium plated fancy type, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed.

S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated fancy type, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed.

S&F for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F stainless steel kitchen plate rack made out of 0.63mm thick sheet of size 765x920mmx220mm deep of approved pattern & make and wt not less than 8.0 Kg each complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall with PVC clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamps complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S&F PVC 110mm bore (SWR) branch piece, double (double Y) with access door equal or unequal, complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction double (double T) with access door equal or unequal, complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) junction (single T) with access door equal or unequal, complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction( Single T) with access door equal or unequal, complete all as specified and directed.

S&F 110/75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

M&L for 75mm bore PVC (SWR) floor trap/ Multi trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to wallscomplete all as specified and directed.

M & L for RCC 1:2:4 Type B-1 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc, including formwork complete all as specified and directed.

M&L Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate)in Fins, fascias, louvres, parapets,and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed.

M&L Formwork to chajjas,troughs and similar items including edges rough finished complete all as specified and directed.

M &L Formwork to fins, louvers, fascia with rough finished surfaces complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10 cm wide complete all as specified and directed.

M&L for newly plastered surface of walls and three coat of whitewash complete all as specified and directed.

M & L for mild steel TMT bars of 6 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

S&F MS rolled section/tubular sections in purling , cross, beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws on angle iron frame of each side complete all as specified and directed.

S & F hold fast of flat iron conforming to Fe-290 (Gde-E-165) including preparing the surfaces & treated with two coats for coaltar and sand with clean sharp sand complete all as specified & directed

S&F IInd Class Hard wood small fittings such as brackets of any type, latch and hinges blocks , shaped door and window stops and the like, incl all necessary labours; article n.exc 200cu.cm each complete all as specified and directed.

M&L complete removal of old decorated surface of wall and applying two coat of acrylic washable distemper over a coat of wall primer and a coat of chalk whitening all as specified and directed

S&F Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

M&L for End Dura Non Skid joint free colour tiles 8 to 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:6) complete all as specified and directed.

M&L for rough cast plaster over 15mm thick in cement mortar (1:4), on stone/brick masonry wall surfaces, complete all as specified and directed.

S&F powder coated Anodised aluminium frame for doors, windows, ventilators or partition with one or more rebates including joining cleat, glazing clips, channel etc for fixing etc. complete all as specified and directed.

S&F MS butt hinge 50mm medium weight cold rolled incl necessary welding etc all as directed.

S & F brass body magnetic ball catches with 8mm dia striking plate including letting in complete all as specified.

S&F for 100mm aluminium handles, cast type, anodised complete all as specified.

S&F of powder coated Anodised aluminium window and ventilator shutters, without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F solar control film 25 micron reflective type sticked to glass pain as per instruction of manufactures

S&F Sheet glass 4 mm thick n exc 0.5 sqmin each pane fixed in aluminium/wooden frame complete all as specified and directed by Engr in charge.

S&F Sheet glass 4 mm thick exc 0.5 sqm in each pane fixed in aluminium/wooden frame complete all as specified and directed by Engr in charge.

S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed by Engr in charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.all as specified & directed

M&L for complete removal of existing treatment and applying two coats of exterior weather proof water base emulsion paint over and incl a coat of white cement based putty complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for preparing old concrete surface and applying one coat of epoxy based bonding agent by brush to the prepared surface of concrete and getting proper bonding complete all as per manufacturer's instructions and as directed

M&L for cleaning the reinforcement thoroughly to remove corrosion deposit completely and applying one coat of anti corrosive zinc based primer on surface area of reinforcement complete all as per manufacturer's instructions and as directed

S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete.

M&L for preparation of new surfaces of steel any description, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

(a) One light /Fan/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 3.49 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. .

All as per item No.3.49 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. (Gyser+AC Point)

All as per item No. 3.49 here-in-before but for one light point controlled by two 2 way switches, with FRLS cables of 1.5 sqmm complete all as specified and directed.

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked complete all as specified and directed.

S & F ceiling rose, surface type, 3 terminal, 240 V.

S & F lamp holder (Angle holder) PVC/polycarbonate type cased body with back plate suitable for pendent fittings including LED bulb of 9 Watt.

S & F stepped type electronic regulator flush type, 220volt, 50Hz, 100watt on the existing phenolic laminated sheet etc as reqd.

Supply and fixing Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type.

S&F with socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S&F Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked,

S&F, Buzzer, Ding Dong AC. 230 volts, single pole.

S & Fix Bell push, flush type, SP, 5 amp, 240V.

S&F Polycarbonate switch piano, flush button, single pole, two way 5 Amp , 240 volts ISI marked.

S & F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of capacity 20 amps, complete all as specified and directed.

Taking down old unserviceable sub main wiring of any size and any discription all as directed.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit oe size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as directed.

M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete and directed.

S&F LED 20/21Watt tube light fitting (T8 type) , including LED retrofit tube 20/21 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.

S&F LED 9/10Watt tube light fitting, surface mounting fitting for mirror light with slik and light weight batton, 240 Volt, with PF >0.95, efficacy >95 , colour temp 6500K complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.

Supply and fixing energy saving and environment friendly LED Security light fitting of 25watt with high power LED's with lens and IP66 protection and luminaire housing is of pressure die-cast alluminium alloy for heat sink for better heat transmission with polycarbonate cover and fixing on bracket of suitable size and making electrical connection from light fitting to source with PVC insulated, sheathed alumium conductor cable of 1.5 Sqmm x 2 core complete with all as specified and directed.

S&F 5 star rated vertical geyser of 25ltr, 2000 watt, swirl technology based, pressure approx 8 bar double protection with thermal cut out and multi function safety valves, glass coated heating element to prevent scale formation and advance PUF technology for power saving including mounting plate, hot and cold pipe, 15Amp plug top, warranty card including all plumbing and civil work. Note:- Old geyser shall be deposited in E/M store.

Taking down main switches/MCB DBs of any capacity/type including MCBs.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with 125 Amp,25 KA,TP MCCB as incomer 200Amp rated bus bar (Vertical type double door, 125 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

Supply and fixing of RCBO 30 mA 40 Amps SPN complete all as specified and directed.

S&F MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Taking down existing ceiling fan of any sweep, cleaning, greasing, painting checking all connections of nuts bolts and refixing it in its original position complete all as specified and directed.

Taking down existing exaust fan of any sweep, cleaning, greasing, painting checking all connections of nuts bolts and refixing it in its original position complete all as specified and directed.

S&F exhaust fan 300 mm sweep 5 star rated compete with louvers including all civil work like cutting and making circular opening in existing wall of kitchen etc ,including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Taking out old meter and Supply and Fixing only single phase KWH meter with LCD display 10-40 Amp with box in existing position by providing wooden board first quality of size 250 mm x 300 mm, including making complete elctric connections all as directed specifed and directed. Note: Old meter to be deposite in AGE E/M store.

Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 5 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

Takng down old unservicable cable and Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35x3.5 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified and directed.

GI Tubes, 'light grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 50 mm complete all as specified and directed.

Taking up or down steel tubing and connction including cleaning for refixing or removal in store all as specified and directed of following size:-

25 mm bore

20 mm bore

Supply , fixing & laying in repairs GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size :-

25 mm bore

20 mm bore

M&L for refixing of existing old GI tubing taking down under item 5 above and connections in new or old position including cleaning internally and externally, any grade/make laid in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

25 mm bore

20 mm bore

Taking out UNSV Gun metal globe & S&F Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following size:-

25 mm bore

20 mm bore

Taking down UNSV tank and S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer, ISI marked hoisting & fixed in position all as specified in SSR part-I of following capacity:-

1000 Ltr capacity

500 Ltr capacity

Taking down u/s float valve and M&L for PTMT float valve high pressure with high density plastic ball, with epoxy coated Aluminium rod screwed for iron pipe and fixed in all as specified and directed of following size:-

20 mm bore

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

Sand cushioning/sand covering for underground cable protection complete all as specified and directed.

M& L for Brickwork with Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified and directed.

Deduct schedule of credit (calculation will be done off line) Rs.17,20,487.20

M/s Khialdas Constructions

agarwal and company

Raja enterprises

MANGLA AMIT BUILDERS PVT LTD

BHARAT MULTITECH INDUSTRIES PVT LTD

Akrati Technimont Limited