GE863/EWS-T-11 OF 2023-24

Amount

Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S & F for 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete, all as specified and directed.

S & F Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), complete, all as specified and directed.

S & F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

M & L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over red oxide, complete, all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed.

M&L for Precast cement concrete block masonry (1:3:6) type C1 using 20 mm well graded stone aggregate with solid block exc 10cm width and setting in cement morter (1:6), complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) but EXCEPT STONE, complete, all as specified and directed.

M & L for providing cement concrete Type C1 (1:3:6) using 20mm well graded stone aggregate as in coping, complete, all as specified and directed.

M & L for providing precast cement concrete Type C1 (1:3:6) using 20mm well graded stone aggregate and set in cement mortar (1:6) as in bond stone, complete, all as specified and directed.

Dismantling wrought iron or mild steel work of any description, complete, all as specified.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc, complete, all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

M & L for rendering 15mm thick on brick work or concrete surface in Cement Mortar (1:4) finished even and smooth without using extra cement, complete, all as specified and directed.

M & L for rendering 10mm thick on brick work or concrete surface in Cement Mortar (1:6) finished even and smooth without using extra cement, complete, all as specified and directed.

M & L for rendering 15mm thick on stone walling in Cement Mortar (1:4) using WPC 3% by weight of cement (WPC to be measured and paid separately) finished even and smooth without using extra cement, complete, all as specified and directed.

Supply only Integral water proofing compound (WPC), complete, all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash, complete, all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer, complete, all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

Demolition of cement concrete in ground floors and pavings including tiles not exc 15cm thick, complete, all as specified and directed.

Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete, all as specified and as directed.

Material and labour for 40 mm thick PCC (1:2:4) type B-1 using 20mm well graded stone aggregate as in floor finished even and smooth without using extra cement, complete, all as specified and directed .

Material and labour for 75mm thick, PCC 1:3:6 type C-1 (using 20 mm well graded mechanically crushed stone aggregate) as in plinth protection/PCC path, and paving, finished the surface even and smooth without using extra cement, joint filled with bitumen and sand mixture applied hot (area not exceeding 1.20 sqm ), complete, all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregateas in floor, including rough finished without using extra cement, complete, all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18 Sqm but not exc 0.38Sqm as in floor laid over and including 15 mm thick screed bed in Cement Mortar (1:6) as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles, complete, all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in Cement Mortar (1:6) as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles, complete, all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in Cement mortar (1:4) ,complete, all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, complete, all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing to store, complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store, complete, all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete, all as specified and directed.

Taking down Shutters of any description exc 2 Sqm each, complete, all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete, all as specified and directed.

Dismantling of timber scantlings under 40 Sqcm in section in any position ,complete, all as specified and directed.

M & L 12 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 Sqcm & n .exc 25 sq cm, complete, all as specified and directed.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F 35mm Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to Chowkat, complete, all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a), complete, all as specified and directed.

S&F powder coated aluminium door shutters aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nose in each door, hinges, anodised aluminium snap beading screws etc, complete, all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55Kg/m including necessary jointing cleats, glazing clips rubber packing, anodised aluminium snap beading screws etc, complete, all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples, complete, all as specified and directed.

Supply and Fix plain sheet glass/pin headded glass of 5.5 mm thick in Squares exceeding 0.50 Sqm in each pane with oil putty and clips, complete, all as specified and directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete, all as specified and directed.

M&L for cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exceeding Half brick wall and not exceeding one brick wall, complete, all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in ends of posts, back of chowkhats etc. area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm each, complete, all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in small articles such as stop, covers, gully gratings, holdfasts, end of posts, back of chowkats, etc. area tarred not exc. 0.10 Sqm each, complete, all as specified and directed.

Supply & fixing Aluminium barrel tower bolt of 150mm long stove enamelled black with bright bolt, complete, all as specified and directed.

Supply & fixing Aluminium barrel tower bolt of 100 mm long stove enamelled black with bright bolt, complete, all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed, complete, all as specified and directed.

S&F 100mm long Aluminium alloy with galvanised mild steel But hinges pin anodise and fixed, type B-21, complete, all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter, complete, all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 75 mm long fixed with screw to shutter, complete, all as specified and directed.

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete, all as specified and directed.

S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete, all as specified and directed..

S & F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate, complete, all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete, all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete, all as specified and directed.

Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store, complete, all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store, complete, all as specified and directed.

S & F 16mm bore of pipes in 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete with insulation to walls, ceilings or in floors etc, complete, all as specified and directed.

S & F 20mm bore of pipes in 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete with insulation, complete, all as specified and directed.

S & F PUF insulated cylindrical tank of capacity 500 ltrs vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making pipe line connection, complete, all as as specified and directed.

S & F PUF insulated cylindrical tank of capacity 1000 ltrs vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making pipe line connection, complete, all as as specified and directed.

S & F 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed.

S & F 25mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed.

S & F 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed.

S & F in repairs bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.

S & F in repairs 15mm dia stop valves fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.

S & F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete, all as specified and directed.

S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete, all as specified and directed.

Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete, all as specified and directed.

S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc, complete, all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low leve lcistern, complete, all as specified and directed.

S & F in repairs vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding, complete, all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc, complete, all as specified and directed.

S & F in repairs Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe, complete, all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall, complete, all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges, complete, all as specified and directed.

S & F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete, all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete, all as specified and directed.

S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, complete, all as specified and directed.

M & L for preparation of old plastered surface of wall including complete removal of existing treatment and applying two coats of cement base paint, complete, all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper complete, complete, all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of white wash, complete, all as specified and directed.

M & L for preparation of old plastered surface of ceiling and applying one coat of white wash, complete, all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint, complete, all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed.

M & L for preparation of old or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (first quality), complete, all as specified and directed.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note : Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof. Note : Any item required to be replaced shall be paid under respective item and in that case this above item shall not be measured and paid.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete, all as specified and directed.

S&F in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc, complete, all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc, complete, all as specified and directed.

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or steel frames with welding etc, complete,all as specified and directed.

S&F in repairs aluminium alloy sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete,all as specified and directed.

S&F in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding, complete,all as specified and directed.

S&F in repairs 125 mm long mild steel pressed steel handle, oval type, stove enameled black, complete,all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140 mm, complete,all as specified and directed.

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete,all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete,all as specified and directed.

S&F 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane, complete,all as specified and directed.

S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed.

S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces, complete,all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc, complete,all as specified and directed.

M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps, jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite, complete, all as specified and directed.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functional, complete, all as directed.

Supply and fixing in replacement of switch piano type 5 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type, complete, all as specified and directed.

Supply and fixing in replacement of switch piano type 15 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type, including 2 way PVC gang box to accommodate 15 amp switch and socket, complete, all as specified and directed.

S&F in replacement Bell push flush type 5/6 Amps, complete, all as specified and directed. . Make : Anchor / Leader/ Kinjal.

S&F in replacement Bell AC 230 volt single pole, complete, all as specified and directed. Make : Anchor / Leader/ Kinjal.

M&L in replacement ceiling rose, 3 terminal with ISI mark, complete, all as specified and directed.

Supply and fixing in replacment of Switch socket combination 5 in 1, 5 Amp, 230 Volt flush type with PVC gang box, complete, all as specified and directed.

Supply and fixing in replacment of Switch socket combination 5 in 1, 5/ 16 Amp, 230 Volt flush type with PVC gang box, complete, all as specified and directed.

M&L in replacement lamp holder, PVC/ Polycarbonate type with back plate suitable of batten fittings, complete, all as specified and directed.

Supply and fixing in replacment surface & wall mounted LED 20W tube light fitting batten 4 feet, slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories, complete, all as specified and directed . Make: Crompton Cat No. LDL20-NW or equavalent

Supply and fixing in replacement of LED 10 W Bulk head luminaire, compact modern design utility with high energy savings, complete, all as specified and directed . Make: Crompton Cat No. LBHP-10-CDL or equivalent in Wipro/Osram/Philips

Supply and fixing 9 watts LED lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode, complete, all as specified and directed . Make: Crompton Cat No. LED9WDFINV4CDL or equivalent in Wipro/Osram/Philips

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt, complete, all as specified and directed.

All as per item No.128 here-in-before but for 4 way, complete, all as specified and directed.

Supply and fixing in replacement Isolator TPN 40 amps 230V, complete, all as specified and directed.

Supply and fixing in replacement Isolator TPN 63 amps 230V, complete, all as specified and directed.

Supply and fixing in replacement MCB SPN 40 amps 230V, complete, all as specified and directed.

Supply and fixing in replacement MCB SP 6-20 amps 230V, complete, all as specified and directed.

M&L in replacement Sheet metal enclosure with two pin and earth plug and socket complete with one single pole and neutral MCB 20 Amp , 10 KA, complete all as specified and directed.

S&F in replacement of thermostat suitable for 25/50 litres capacity Geyser , complete, all as specified and directed. Make : Recold/ Bajaj etc.

S&F in replacment of multifunction safety device (pressure release valve) suitable for 25/50 ltrs cap geyser, complete, all as specified and directed.

S&F in replacement of heating element triangular type1500 Watt suitable for 25/50 litres capacity Geyser, complete, all as specified and directed. Make :Recold/Bajaj/DassPass

S&F in replacement of heating element triangle 2000 Watt suitable for 25/50 litres capacity Geyser, complete, all as specified and directed. Make :Recold/Bajaj/DassPass

S&F in replacment of indicating lamp set red/ green colour, complete, all as specified and directed.

S&F in replacement of PVC flexible connection pipe, size 2 feet's ,suitable for Geyser hot water including washer, complete,all as specified and directed.

Supply and fix in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm, complete, all as specified and directed.

All as per item No 141 above but of size 10 Sqmm 2 Core, complete all as specified and directed.

Supply and fix in replacement PVC Casing Caping 1/2" (12/20mm), 3 mtr length, complete, all as specified and directed.

Supply and fix in replacement PVC Casing Caping 3/4"(20/25mm), 3 mtr length, complete,all as specified and directed.

Supply and fix in replacement PVC Casing Caping 1"(25/32mm), 3 mtr length, complete, all as specified and directed.

Supply and fix in replacement of stainess steel fastner suitable for fixing geyser, 25/50 ltrs, complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 41140.00 for old Materials as per Schedule of Credit.

M/S Rohit Enterprises

M/S J.S.ENTERPRISES

M/S Shamsher Negi Dewa