COMPREHENSIVE AND PREVENTIVE MAINT OF DG SET 3x500 KVA INCLUDING REPLACEMENT OF CONTROL PANEL, FLP FITTING, FLP SWITCHES, CONDUIT AND ALLIED WORKS AT TP COMPLEX AT AF STN DIGARU

Amount

Repair/ maintenance of Dg set of cap 3x500 KVA Make-Cummins water cooled type Model KTA-19-G9,KTAA-19-G10,KTA-19-G9 Through the OEM of M/S Cummins or authorized dealer of M/S Cummins (As per MOU) for following parts and equipments by servicing/descaling of raditor and replacing ant type of spare Parts shall No2 as an when required to DG Set complete all as specefied and directed with and including the following:-

Note-The cost of spare and labour for any servicing minor and major repair of DG Set as when required or as recommended by The OEM during inspection /analysis report(Except for spare listed Sl No2 here in after)shall be responsibility of the contractor and the unit rate quoted shall be deemed to include the cost of the same.

The service from M/S Cummins along with all technicians and engineer equipped with all required T&P shall visit the plant on monthly basis to carry out necessary inspection /servicing/repairing of the plant shall be submit the inspection/servicing report to Engineer-in-charge any repair shall be inspection of carried out immediately (First inspection shall be carried out with in 15 days from placing the work order or as directed by Engineer-in-charge)

In addition to the above mentioned servicing and repairing schedule any complaint / defect/ breakdown /defect/falt in the DG set system will be attend with 24 hours from the time of registering the complaint verbally / telephonically / via email or any mode of communication.

In case of any break down /defect/falt in the DG sets due to which the DG sets in put more than 24 hours the following penalties shall be imposed on the contractor: (a) Rs -5000/- (Ruppes five thousand only) shall be recovered for not attending the defect/faultwith in 24 hours from lodging the complaint telephonically via e-mail/ verbally. (b) Thereafter Rs- 5000/- will be added for every subsequent 12 Hours period till rectification of defect and making the plant functional. (c) Contractor will provied Tele phone No, Mobile No and e-mail of his responsible persons and OEM who can be contacted in case of emergency to lodge the complaint along with his own details. (d) Original spare parts supplied by M/S Cummins will only be used for any replacement spare,spare arranged from any other source will not be allowed. (e) All consumables such a cotton waste ,nut bolt, washer, screw cleaning agents gasket and safety device for work men shall be provided by the contractor and unit rate quoted shal be deemed to the include the the cost of the same.

M/S Cummins will cover the following scope of work:- (a) Inspection of DG Sets 03 Nos of has to be carried out monthly inspection. (b) Servicing of DG Sets 03 Nos of has to be carried out half yearly inspection. (c) Checking oil level of Dg sets and checking and rectification of leakage if any and filling with new oil up to required level. (d) Checking functioning of all system and making adjustment for proper working. (e) Checking moving system any abnormal sound abd checking mounting and fixing arrangment. (f) Checking of coupling system and tighting off nut bolts. (g) Checking of all switches. (h) Checking of batterys and tighting battery terminal . (j) Checking raditor water level checking any leakage any filling with new. (k) Checking the all indication system of DG sets and tighting properly including replacing burnt out /over heated cable ends if any. Note:- DG Set of cap 500x3 KVA Waer cooled spare parts required for repair / replacement will be measured and paid in relevent items Sl No-2

Supply only following spare suitable for 500 KVA DG Sets water cooled Model as above Make : Cummins complete all as specified and directed:-

Element LUB oil filter

OnlInhibitor corrosion 10 Ltr

Element crn resistor

Element oil by pass filter

Seprator fuel water

Element air cleaner

Element air cleaner

Hose and belt kit

Switch coolant level

Battery 12 volt 100 AH

Sensor pressur

Sensor temperature

Pickup magnati

Engine oil

Taking down u/s inbuilt panel of DG Set of cap 500 KVA Model No KTA-19-G9,Sl No-31452 and replacement of the follwing items with new testing commissioning all as specefied and ditected. Note-Original spare parts supplied by M/S Cummins will only be used.

Adapter 0 ring

PCCB Assly dynamo GOV

Card control

Harness Genest

Bargra PH (HM1140)

Display Control

Lable Logo

Lable Waning (vatious voltage)

Pickup magnateic

Manual operator

Panel control box

PCB Assy

Valve shut off

Washer plain

Waser lock

Seal Rectangular ring

Elbow mail Adapter

Sender low coolent

Sender pressure

Solenoid

Harness low coolant lavel

Harness Engine

Transformercur

Pump Fuel TLN

Bushing Reducin G pipe

Screw socket head cap

Battery pulse2 4V 32AH

Service charge

Delivery charge

Taking out carefully copper/aluminium point wiring through existing conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and Labour point wiring in existing conduit / PVC Cassing capping with FRLS PVC insulated unsheathed, stranded copper conductor single core 1.5 Sqmm cable for one light point controlled by one one way with all accessories, junction box etc incl one FRLS PVC insulated, un sheathed Single core stranded/solid copper conductor cable of size 1.0 Sqmm for continues earth wire connected to main earth dolly , including matching the disturbed surface with cement work and white washing/colour washing/distembering to match the disturbed surfaces complete all as specified and directed by Engr -in Charge.

One light/fan point controlled by one switch.

3 pin 5 amps socket outlet on independent board.

All as per items No. 5 above but with cables of size 2.5 sqmm for phase, neutral and 1.5 sqmm for earthing for 3 pin 15 amps socket outlet on ind board.

Supply and fixing piano type flush single pole one way 5 Amp switch.

Supply and fixing switch socket combination 2 in 1, 3pin 5A.

All as per items No 7 but 3 pin 16 Amp.

Supply fixing in replacement of old burnt modular switch as per existing 1 way 6 amps 1 module complete all as directed Make :- MK/ Havells/ Schneider

All as per items No 9 modular switch 1 way 16 amps 1 module Make :- MK/ Havells / Schneider

All as per items No 9 modular socket 6 amps 3 pin complete all as directed. Make : MK/ Havells/ Schneider

All as per items No 9 modular socket 6/16 amps 5 pin complete all as directed. Make : MK/ Havells/ Schneider

Taking down unserviceable Flame proof light fitting of any type any size and any capacity from its existing position after disconnecting all electrical connection.

Supply and fixing in replacement of old U/S Flame proof -weather proof LED fluorescent fixture 2x20W with tube rod.Cat No-EXTN2LT8-16/20 . Make:- Crompton or equvilent .

Supply and fixing in replacement of old/burnt Flame proof -weather proof switch /isolator 10 amp single pole ON/OFF.

Disconnecting and taking down surface mounted/ flush mounted defective light fitting of any type from wall/ceiling complete all as specified and directed.

S & F LED light fitting with tube 2x20 watt T8 LED tube surface mounting IP65, 4 fit industrial type luminaires complete including LED tubes , single side connection complete all as specified and directed. Make : Surya, Havells or equivalent model of Bajaj/Wipro.

S & F LED light fitting with tube 1x18 watt T5 LED tube surface mounting IP65, 4 fit industrial type luminaires complete including LED tubes , single side connection complete all as directed. Make: Surya,Havells or equv model of Bajaj/Wipro.

S & F LED tube 1x20 watt T8 complete all as specified and directed. Make: Surya, Havells or equv model of Bajaj/Wipro.

S & F LED tube 1x18 watt T5 complete all as specified and directed. Make: Surya,Havells or equv model of Bajaj/Wipro.

Supply and fixing in replacement of HPSV Lamp of capacity 70 Watt. Make:- BAJAJ / CROMPTION GREAVES/ Havells).

All as Per items No 22 of cap 150 W .

All as Per items No 22 of cap 250 W .

Supply and fixing in replacement of ignitor 70 to 250 W. Make:- BAJAJ / CROMPTION GREAVES / Havells).

Supply and fixing in replacement of bulb Holder thereded of cap 70 W.

All as per item No 26 here in before but bulb Holder thereded of cap 150 W.

All as per item No 26 here in before but bulb Holder thereded of cap 250 W

Supply and fixing in replacement of copper chowk ballast of capacity 70 Watt. Make:- BAJAJ / CROMPTION GREAVES/ Havells.

All as per item No 29 here in before but of cap 150 W . Make:- BAJAJ / CROMPTION GREAVES/ Havells.

All as per item No 29 here in before but of cap 250 W. Make:- BAJAJ / CROMPTION GREAVES/ Havells).

Supply and fixing in replacement of ignator of capacity 10 MFD suitable for 70/150 W fitting. Make:- BAJAJ / CROMPTION GREAVES/ Havells.

All as per items No 32 of ignator of cap 33 MFD suitable for 250 W Supply and fixing in replacement of ignator of capacity 10 MFD suitable for 75 W fitting. Make:- BAJAJ / CROMPTION GREAVES/ Havells

Taking out U/S LED floodlight and supply and fixing with new luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP 66 complete 100 watt capacity. WIPRO or equv in CG/Havells incl fixing and making electric connections and testing for proper working complete all as specified and directed.

M & L for repairing/servicing of electrically operated shutter operating mechanism at parking/ storage areas complete for both electrical as well as manual operation of the shutters, by checking/repairing of all the parts/ systems, cleaning and tightening of all contacts & electrical connections, oiling/ lubrication of the gears, bearing & chains etc, checking and properly tightening of all the hardwares, replacing worn out / rusted nuts/ bolts/ washers etc with new one, checking and setting the mountings for proper alighnment and for smooth/ trouble free opening/ closing of the shutters, checking insulation value of the motor and testing the sysytem for automatic (electric motor mode) and manual operation for trouble free opening and closing of the shutters complete all as specified and directed.

Disconnecting and taking down the defective ceiling fan 1200 mm sweep and refixing the same at the original postion after repairs incl supply and fixing safety/locking split pins, making electrical connections and testing for proper working complete all as specified and directed.

Disconnecting and taking down the defective exhaust fan 380 mm sweep and refixing the same at the original postion after repairs incl making electrical connections and testing for proper working complete all as specified and directed.

Dismantling the fan motor, taking out burnt out windings,bearings etc cleaning the slots and rewinding with super enamelled copper winding wire as per existing gauge incl all insulating materials, reassembling and testing for proper working complete all as directed for the following items given below:-

1200 mm sweep ceiling fan.

380 mm sweep exhaust fan

S & F fan capacitor 2.5 mfd complete all as specified and directed. Make: Bajaj/ CG/ Havells

S & F ball bearing suitable for 380 mm sweep exhaust fan.

S & F ball bearing suitable for 1200 mm sweep ceiling fan.

M&L in repair RCCB 4pole 415 volt 63 amp complete all as specified directed.

Taking out following old U/S MCB from DB and replacement with new all as specified and directed-

Supply only MCB SP 6-20 AMP.

Supply only MCB SPN 20-32 AMP.

Supply only MCB TPN 20-32 AMP.

M/s Capital Traders

M/s Dhruv Enterprises

M/S Vimal Enterprise

M/S B.H. ENTERPRISE

KUNDAN ENGINEERS AND BUILDERS

M/S. SUBHAS CONSTRUCTION CO.

M/s Ravi Enterprise