86135SPECIAL REPAIRS TO BUILDING NO P-178 (C) 9TH BLOCK OF CADET HOSTEL (BOYS) AT AFMC PUNE.

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each complete all as directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4 sqm each complete all as directed.

Taking down chowkats or frames only exc 1.5 sqm but not exc 4 sqm complete all as directed.

Taking down shutters of any description area exc 1.0 sqm but n exc 2.0 sqm complete all as directed.

Taking down shutters of exc 1 sqm and n.exc 2 sqm and refixing in the same opening complete all as directed.

Resucuring or easing and adjusting without taking down shutters of door / windows / cupboard n.exc 1 sqm complete all as directed.

Resucuring or easing and adjusting without taking down shutters of door / windows / cupboard exc 1 and n.exc 2 sqm complete all as directed.

S&F pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C1 (20 mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and as directed.

S&F 35 mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick (two panels) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F mild steel almirah shutters with frame, exceeding 1.5 Sqm, made of 1mm thick mild steel sheet in two leaves as built in furniture in cupboards including locking arrangement with mortice lock of mild steel, vertical type, 65 mm size, 2 lever, ISI marked with duplicate keys and handle and suitable hinges etc including two coats of spray painting over a coat of red oxide primer complete fixed on brick or concrete wall with minimum six numbers of 10 mm dia and 100 mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0 complete all as specified and as directed.

S&F in repair mild steel almirah / cupboard partitions not exceeding 1.5 Sqm, made of 1mm thick mild steel sheet with edges hemmed / folded as required including necessary fixing to cub boards complete all as specified and as directed.

M&L for preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10 cm width or girth complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description and applying two coat of synthetic enamel paint to change tint complete all as specified and as directed.

S&F steel windows (z-section) with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F steel windows (z-Section) with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and as directed.

M&L for Mild steel ventilator with top hung shutter incl hinges ,steel peg stay complete incl one shop coat of Zink chromate primer complete all as specified and as directed.

M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for cuting hole in brick wall built in cement mortar for inserting or taking out holdfasts or like and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick complete all as specified and as directed.

All as per item No 20 here- in- above but n.exc half brick wall complete all as specified and as directed.

S&F ventillators / louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15 mm x 15 mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20 mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10 mm (5 mm x 2 mm) thick, 20 mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5 mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. Each PVC door shutter leaf consist of 3 Nos 100 mm long MS butt hinges. complete all as specified and as directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19 mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and as directed.

S&F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etccomplete all as specified and as directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F mortice lock vertical type 100 mm brass four lever complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handles ,fabricated type complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and as directed.

S&F butt hinges 100 mm, medium weight complete all as specified and as directed.

S&F in repair fancy type Stainless steel curtain rod 25 mm dia with SS brakcet, knobs, rings @ 10 cm c/c etc complete all as specified and as directed.

S&F pressed steel frames 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20 (a) in 2nd class hard wood complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and ongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete. Note:To be operated for Cadets Rooms floor, Sunken Treatment, Repair to benching of Chajjas, PCC Jalli and repair of roof padding, Plinth protection and other cement works at irrespetive of position etc at any position.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. Note : To be operated for FF/SF/TF floor.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

M&L for 75 mm thick levelling course in cement concrete type B-2 1:2:4 using (40 mm graded stone aggregate) complete all as specified and as directed.

M&L for 40 mm thick levelling course in cement concrete type B-1 1:2:4 using (20 mm graded stone aggregate) complete all as specified and as directed.

M&L for 25 mm thick levelling course in cement concrete type B-1 1:2:4 using (20 mm graded stonee aggregate) complete all as specified and as directed.

M&L for 25 mm thick roof padding in cement concrete type B-0 1:2:4 using (12.5 mm graded stone aggregate) mixed with liquid water proofing compound as per manufacturers instructions, finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed. Note : To be operated for roof padding, waterproofing compound liquid type will be measured and paid separately

M&L for polishing of existing kota stone floor and skirting upto satisfaction of Engineer-in-Charge.

M&L for 20 to 25 mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing upto entire satisfaction of Engineer-in-Charge complete all as specified over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Rounding edges of kota stone slabs one edge such as in steps and other similar situation including cutting two lines of 5 mm wide and 3 mm deep in straight line and perfect shape including necessary tools and labour complete all as specified and as directed.

All as per item No 47 here- in- above but kota stone slab (100 /150 mm x 550 mm) and 20-25 mm thick in riser of steps, skirting , dados and pillars polished to entire satisfaction of Engineer-in-Charge laid over and including 10 mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and as directed.

M&L for Vitrified ceramic tiles (light shade) 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm. in floors etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match, including 15mm thick screed bed in cement mortar 1:6 over complete all as specified and as directed.

M&L for Vitrified ceramic tiles (light shade) 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

M&L for coloured non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured designer glazed ceramic tiles of size 300 x 600 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F endura rubber moulded industrial grade tiles not less than 0.16 Sqm size, any shade in tread / risers / floor complete all as specified and as directed.

M&L for 10 mm thick screed bed / bedding layer in cement mortar 1:4 for laying rubber moulded endura tiles of item No 54 above complete all as specified and as directed.

Supply only water proofing compound. ISI marked complete all as specified and as directed.

M&L for providing precast cement concrete louvers / jalli 40 mm thick in PCC type B-0 1:2:4 (using 12.5 mm graded stone aggregates) and set in CM 1:4 complete all as specified and as directed.

M&L for 15 mm i.e. 10 mm before application of Pidifin 2K or equivalent layer as per manufacturers instructions and 5mm thick over it rendering in cement mortar 1:4 on horizontal and vertical faces of sunken portion mixed with WPC liquid type complete Note : Application of Dr Fixit Pidifin 2K or equivalent chemical layer will be measured and paid for under item No 56

M&L for applying layers of Dr Fixit Pidifin 2K to vertical / horizontal plastered surfaces of sunken portion as per manufacturers instructions complete as directed complete all as directed. Note : Ponding test to be carried out after application and leakage seepage if any to be rectified by Pidifin 2K layer before filling PCC 1:5:10.

M&L for P:C:C 1:5:10 type E2 using (40 mm graded stone agregate) as in mass concrete as in sunken portion including providing necessary slope / camber as directed and duct for drain of water (pipe for spout will be measured and paid seperately.

S&F in repair 300 mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

M&L for preparation of new untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old steel or iron surfaces of any description and applying a coat of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken glass (any kthickness, size, quality or description) from metal frames, glazed with putty complete all as directed.

S&F 4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 sqm each complete all as specified and as directed.

S&F 3 mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm complete all as specified and as directed.

M&L for 50 mm thick plain cement concrete (1:3:6), type C-1, using (20 mm graded stone aggregate) as in plinth protection etc complete all as specified and as directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as directed.

M&L for 15 mm thick rendering in CM 1:6 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and as directed.

All as per item No 69 here- in- above but in CM 1:4 for external wall surfaces complete all as specified and as directed.

All as per item No 69 here- in- above but 10 mm thick in CM 1:3 as in ceiling inclusive of fixing Gl wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.

M&L for Rough cast plaster as specified .(Rendering coat not less than 10 mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12 mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of OBD over one coat of 3 mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation and complete removal of existing treatment of old plastered surface of wall and applying two coats of OBD over one coat of 3 mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new surface of seamless false ceiling and applying two coats of OBD of approved tint over one coat of 3 mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.

M&L for complete removal of existing treatment of old plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr-in charge.

Removing of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and as directed by Engr-in-charge (a) M&L for 10 mm thick plaster screed bed layer in CM 1:3 on concrete surfaces mixed with WPC @ 3% by weight of cement. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminous primer @ 0.40 litres per Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.5 Kg/Sqm and 3 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge, Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engr-in-charge.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal', white , including fixing bolts etc including PVC seat cover white with flat bottom including CP or aluminium anodised hinges devices etc complete all as specified and as directed.

S&F in repair jet spray for EWC seat with 1 m tube complete all as specified and as directed.

S&F in repair soap dish Cat No T6403A1 on the wall complete all as specified and as directed by Engineer-in-Charge.

S&F in repair wardrobe hooks (single) of CP brass complete as per sample and directed.

S&F in repair wall mixer Cat Part No G1816A1 complete all as specified and as directed.

S&F in repair CP basin mixture without pop up Cat No G3114A1 complete all as specified and as directed.

S&F in repair PVC connection 15 x 600 mm complete all as specified and as directed.

S&F in repair stop valves, cast copper alloy, screwed down, high presuure, with crutch or butter fly handle, screwd both ends for iron pipe or for unions fancy type, chromium plated (long shank concealed type) complete all as specified and as directed.

S&F in repair 15 mm chromium plated cast copper alloy bib taps complete all as specified and as directed.

S&F in repairs 15 mm bore chromium plated, fancy type stop valve, cast copper alloy screwed down, for fancy type chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and as directed.

S&F in repair brass chromium plated Single Flow Overhead Shower with Arm complete all as specified and as directed.

S&F in repair angle cock 15 mm bore complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections complete as specified and as directed.

S&F 15 mm bore medium grade GI pipe ,with all fitting and fixed complete to walls and ceiling concealed and jointed fixed with adhesive complete all as specified and as directed.

S&F 20 mm bore medium grade GI pipe ,with all fitting and fixed complete to walls and ceiling concealed and jointed fixed with adhesive complete all as specified and as directed.

S&F MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank, and similar work conformed to Fe-410 or 310-0 complete all as specified and as directed.

Disconnecting existing syntex tanks exc 1000 and upto 2000 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed.

Dismantling water tanks capacity exc 250 Ltr and n.exc 500 Ltrs and removing to store complete all as directed.

Dismantling water tanks capacity exc 500 Ltr and n.exc 1000 Ltrs and removing to store complete all as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc complete all as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes, nipple, union / sockets etc complete all as directed.

M&L for providing cement concrete (1:2:4) B-1 as in chajjas, roof fascias, PCC padding to hold railling in verandah and stair hall and duct cut into foor inserting angle iron supports thereof, filling chases on wall to hold angle iron supports, roof and chajja kerbs etc and like complete all as specified including making necessary grooves.

S&F in repair 20 mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 20 mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

Taking down eaves gutter or RWP of any description complete all as specified and as directed.

S&F 110 mm dia PVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified and as directed.

S&F 110 mm dia PVC bend any radius complete all as directed.

M&L for precast cement concrete block masonry exceeding 10 cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and as directed.

M&L for precast cement concrete block masonry not exceeding 15 cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:4 complete all as specified and as directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, slab, beams, lintels etc, removing all loose rust/scale form exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars/ IRC fabric 50 mm X 50 mm X 12 gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6 mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land all as specified and as directed Note : (RIC 50 x 50 x 12 gauge or reinforcement bars shall be measured and paid separately).

M&L for epoxy grouting 75 mm thick for crack filling, voids, and joints in concrete structures by providing deep penetration, shrink free solid mass, strong bonding inside the cracks and excellent resistance to honey combing and chemicals including necessary formwork and securing the formwork or any scafolding etc required for the process complete all as specified and directed. Note : To scrap the RCC beam disintegrated portion and application of epoxy grouting as above.

Dismantling CI work of any description and any position complete all as directed.

S&F 100 mm sand cast Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm sand cast Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F 100 mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.

S&F 75 mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.

S&F 100 mm CI Bends (any radius) with duck’s foot or heel rest fitted with oval access door complete all as specified and as directed.

S&F 100 mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F CI Nahani trap 75 mm bore with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F SGSW gully trap square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair cast iron cowl 75/100 mm dia as required complete all as specified and as directed.

S&F in repair stack clamps made out of 50 mm x 5 mm Flat iron and 16 mm round iron stay incl bolts and nuts and securing ends stays to wall or roof includding taking down the existing clamps for rain water pipe or CI pipe 100 mm bore at any height complete all as specified and as directed.

S&F stack clamps made out of 50 mm x 5 mm Flat iron and 16 mm round iron stay incl bolts and nuts and securing ends stays to wall or roof includding taking down the existing clamps for rain water pipe or CI pipe 75 mm bore at any height complete all as specified and as directed.

Easing / petty repair of aluminium door / wooden door / PVC door / steel windows / ventilator / steel cupboards by adjusting hinges by hammering oiling / greasing / welding to hinges, adjusting handle of peg stay and making the shutter fully functional complete all as specified and as directed.

S&F in repair MS window handle 125 mm with nut or bolt to steel windows fixed at any height (i.e. upto three storey) complete all as specified and as directed.

S&F in repair box type window hinges for steel window in lieu of broken projected type hinges or any type by welding of suitable size at site at any height (i.e. three storeyed) complete as directed by Engineer-in-charge.

Dismantling of boarding, any description fixed in any position with nails i.e. in false ceiling and wall lining etc and similar position complete all as directed.

S&F Anodised aluminium snap grid framed work for false ceiling and incl hangers 6mm dia G.I (upto 1200 mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3 mm size 60 mm long and expansion holdfastener 12.5 mm dia 40 mm long complete all as specified and as directed.

M&L for 12 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish complete all as specified and as directed.

S&F in repair waste coupling chromium plated for urinal with grating 100 mm dia with or without hole complete all as specified and as directed.

S&F in repair waste coupling chromium plated for WHB with grating 100 mm dia complete all as specified and as directed.

S&F in repair PVC waste pipe 32 / 40 mm dia of standard length suitable for WHB or for sink as required at site complete all as specified and as directed.

S&F in repair vitreous china urinals white bowl type (back or corner wall type), with grating and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; including 32 mm bore PVC waste pipe and CP waste coupling etc complete all as specified and as directed.

S&F in repair syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32 mm flush pipe etc complete all as specified and as directed.

S&F MS butt hinges medium weight 100 mm long fixed to pressed steel / angle iron frames by welding and with screws to the wooden / PVC shutters / frames complete all as specified and as directed.

S&F in repair 250 mm long aluminium anodised sliding door bolt with hasp, staple, (bolt type) and fixed clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F in repair Mild Steel barrel tower bolt 200 mm long stove enameled black, with bright bott complete all as specified and as directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair aluminum handle cast type anodized 150 mm long fixed to PVC / panelled / skeleton / cupboard shutters complete all as specified and as directed.

S&F in repair mild steel lock upboard Grade size 75 mm with locking lever arm where required complete all as specified and as directed.

S&F in repair grating round 125 mm dia with or without hole CP brass chromium plated complete all as specified and as directed.

M&L for decorative POP cornices /moulding of pattern of cross section area exc 13 sqcm and n.exc 25 sqcm complete all as specified and as directed.

Taking up or down 25 or 32 mm bore steel tubing and connections complete as specified and as directed.

Taking up or down 40 or 50 mm bore steel tubing and connections complete as specified and as directed.

Refixing 25 or 32 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

Refixing 40 or 50 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F 32 mm bore medium grade GI pipe ,with all fitting and fixed complete to walls and ceiling concealed and jointed fixed with adhesive complete all as specified and directed at site.

S&F 50 mm bore medium grade GI pipe ,with all fitting and fixed complete to walls and ceiling concealed and jointed fixed with adhesive complete all as specified and directed at site.

Taking down existing unserviceable point wiring of any description/type/ size of light / fan / tube / power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified.

Taking down the existing unserviceable main switch / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes complete all as specified.

Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified.

Taking down ceiling fan / exhaust fan / wall fans of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23 / 0.193 from ceiling rose to fan terminal complete all as specified and as directed including Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M&L for point wiring complete with and including single core FRLSH PVC insulated un- sheathed flexible bright annealed multi stranded copper conductor cables 1.5 sqmm (22/0.30mm ) 1100 Volts grade drawn through and including heavy grade PVC rigid conduits of suitable size / dia as specified in SSR part-I and as required at site, totally concealed in walls /floors/ceiling/roofs etc. including all conduit accessories/fittings/junction boxes/inspection covers etc. of heavy grade, ISI marked and modular type sunken boxes factory made including 1.5 sqmm 1100 V grade FRLSH PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/fans etc. at one end to common earth dolly at other end, complete all the specified. Note- (i) Making good of distrubed surfaces matching with the surrounding will be done by contractor without any extra cost (ii) Cutting in chases and pointing in will be done by contractor without any cost. (iii) Modular cover plate blanke plates be done by contractor without any cost.

One light point controlled by one, one way switch all as specified.

One ceiling fan/ wall fan/ Exhaust fan point controlled by one, one way switch and regulator all as specified.

One three pin 5 Amps socket outlet point controlled by one No one way switch on same board all as specified.

One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board all as specified.

One light point controlled by two 2-way switches complete all as specified.

All as per item No 156 here- in- above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S&F Single pole and neutral metal clad sheet enclosure with a two pin and earth plug and socket complete suitable for housing one single pole MCB 20 Amps complete all as specified.

S&F modular switch 6A SP one - way 230V white ivory finish complete all as specified

S&F modular switch 16A SP one - way 230V white ivory finish complete all as specified.

S&F modular switch 6A SP two - way 230V white ivory finish complete all as specified.

S&F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops complete all as specified.

S&F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops complete all as specified.

S&F ceiling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S&F stepped type modular fan regulator electronic type for ceiling fan two module with white ivory finish complete all as specified.

S&F MCB TPN DB 4 way double door with 200 amps rated busbar 415 V complete all as specified.

S&F MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall making good to disturbed surfaces, and connecting with existing cable complete all as specified and as directed.

S&F MCB four pole of rated capacity 63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.

S&F MCB double pole of rated capacity 40 to 63 Amps amps, 230 volts breaking capacity 10 KA, C-curve complete all as specified.

S&F MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

M&L for Sub main wiring complete with 2 single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLSH cable with continuous copper earth conductor of 1.5 sqmm in and including PVC casing caping and accessories complete all as specified. Note:- (a) Making good of disturbed surfaces will be done by contractor without any claims. (b) 2 runs of 2.5 Sqmm and one run of 1.5 sqmm earth continuity conductor and one run of PVC casing caping shall be measured as one unit length.)

M&L for Sub main wiring complete with 2 single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLSH cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping incl accessories complete all as specified. (Note :- 2 runs of 4 Sqmm and one run of 2.5 sqmm earth continuity conductor and one run of PVC casing caping shall be measured as one unit length.)

M&L for Sub main wiring complete with 4 single core 6 sqmm and one core of 4 sq.mm earth wire,1100 volts FRLSH grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including PVC surface conduits including reqd. accessaries complete. (Note:- 5 runs of 4 Sqmm conductor and one run of PVC Conduits shall be measured as one unit length.)

M&L for Sub main wiring complete with 4 single core 6 sqmm and two core of 4 sq.mm earth wire,1100 volts FRLSH grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in existing PVC surface conduits including reqd. accessaries complete. (Note:- 4 runs of 6 Sqmm conductor and two run of 4 sqmm earth continuity conductor and one run PVC Conduits shall be measured as one unit length.)

S&F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F LED bulb of 12W cap 2 pin type complete all as specified and as directed.

S&F in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector.

S&F in replacement of LED mirror light fitting 10 watt complete in all respect having high luminaire, integrated LED channel with white acrylic cover of 10W cap complete all as specified and as directed.

S&F in replacement of LED light fittings 2'x2', 42 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements complete all as specified and as directed.

S&F LED security light in replacement of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired complete all as specified and as directed.

M&L for servicing of geyser of capacity 50 Ltrs, including taking down and cleaning, spray painting with two coat of synthetic enamel paint including writing MES no and refixing the geyser complete all as specified and as directed.

M&L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (Note:-GI earth strip and protection pipe beyond 7.5 m will be measured and paid separately)

REKHA ELECTRICALS

Parhar Enterprise

M/s.BAJRANG CONSTRUCTION

Sayili Enterprises

M/S DEV ENTERPRISES