SPECIAL REPAIR TO GATES COMPOUND WALL FENCING AND FOOT PATH ETC AT DUNN MARG BLOCK NO SM 185 GENERAL ROAD OFFRS MD ACCN AREA AND PROVISION OF GEYSERS IN PC 2 SINGLE OOFICER ACCN UNDER GE (MIS) MHOW

Amount

B/R WORK PORTION :

Demolition of cement concrete (unreinforced) of any description and in any position not other specifically provided complete all as specified and directed by Engineer in Charge.

Demolition of reinforced cement concrete of any description and in any position not other specifically provided complete all as specified and directed complete all as specified and directed by Engr in Charge.

Demolition of brick work or stone work, built in cement mortar including all quions, arches, pillars etc complete all as specified and directed

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil including cutting bushes,grass etc.complete

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in hard/dense soil

Spreading and levelling of earth obtained from excavation as in filling in layer not exceeding 25 cm thick , well ramming including watering as required

Returning filing in soil including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed.

Removing excavated soil to a distance n exc 50m and deposited where directed at level n exc 1.5 m above the starting point

M&L for hardcore with broken stone or boulders of gauge n.exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for 100 mm thick plain Cement concrete(1:4:8) type D2 using 40mm graded stone aggregate as in sub base,floor etc complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation and mass concrete etc., complete all as specified and directed

M&L for boulder stone pitching grouted with cement and sand mortar 1:6 complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in basement slab /mass concrete etc like complete all as specified and as directed.

M&L for brick work with sub class 'B' modular bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for formwork to edges of concrete flats as in floors base for rough finished surfaces , horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for cols, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed..

M&L for rendering 15mm thick cement plaster in CM ( 1:4 ) on fair faces of brick or concrete surfaces and surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints as in retaining wall as a weep hole complete all as specified and as directed.

S&F mild steel framed work such as grill grating,etc with ends of bars shouldeed and or rivited or forged into spikes framed guard bars,barred iron doors,ladders,framed baulester walk ways,railing;framed work of water tanks and similar conforming to Fe-290 GdeE-165

M&L for Reinforced concrete pipes bore of pipe 600 mm , class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete type 1:2:4 type B1 using 20 mm graded aggregate as in coping, bearing benching and similar works , etc in including necessary formwork complete all as specified and directed..

M&L for machine pressed rubber moulded coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M40 Grade, laid over stone dust cusion complete all as specified and directed.(Note: stone dust cushioning shall be measured and paid separately.)

M&L for stone dust under floors including spreading, watering and consolidation complete all as specified and directed.

Dismantling posts or struts ( steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground etc complete all as specified and directed

Dismantling of GI plain/ GI barbed wire any description complete all as specified and directed

Dismantling fencing wire mesh,any type complete all as specified and directed

Excavation in post holes (or similar holes) each not exceeding 0.50 cum getting out in hard/dense soil including returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm,watering and removing surplus soil to distance not exceeding 50m and making good the disturbed surface complete.

M&L for brick work except brick straight or curved on plan exc 6 m mean radius built in cm 1:6 complete all as specified and directed by Engr in Charge.NOTE: Serviceable bricks obtained from demolition shall be used.

M&L for rendering 15mm thick cement plaster in CM ( 1:4 ) on other than fair faces of brick or concrete surfaces and surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F Mild steel angle iron (Fe-310) as in posts, struts,flat iron( for securing wire mess etc ) in fencing including cutting top to shape required, drilling holes, notching for wire,erect & fixed in true position etc complete all as specified and directed

Supply only galvanised chain link fencing, any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wirecomplete all as specified and directed

S&F mild steel screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia complete all as specified and directed

M&L for preparation of new steel/iron surfaces exceeding 10cm width or girth two coats of synthetic enamelled paint over a coat of red oxide primer including .complete all as specified and directed

M&L for preparation of new steel/iron surfaces not exceeding 10cm width or girth applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed

M&L for Preparation of brick masonary / concrete/ plastered / unplastered surfaces of any description and applying two coats of exterior weather proof water base emulsion paint over a coat of primer of same make on walls complete all as specified and directed Make: Asian-ACE, Berger-Wall Masta, Nerolac Suraksha

E/M WORK PORTION :

Supply and fix of electric water heater storage type, Capacity 25 litres and heating helement 2 KW, BEE 5 Star rated complete with all accessories such as a safety valve,thermostate,NRV,connection pipes of GI/PVC and necessary electric connections etc. complete all as specified and directed. Make : CG/Havelles/Bajaj

S&F of PVC connection Heavy duty 24" long 15mm dia with 2 Nos brass check nuts suitable for Hot water complete all as specified and directed.

Supply & fix of 15 mm bore steel water tubing "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed.

Supply & fix Stop valves 15 mm , chromium plated fancy type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply & fix of Bib taps 15 mm , chromium plated fancy type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down,screwed for iron pipe or for unions and fixed complete all as specified and directed.

sunway associates

APconstruction

M/S UnitedConstruction

M/s Gupta Constructions

sabir and brothers