REP MAINT TO JOINERY AND WATER PROOFING TREATMENT OF RCC ROOF CHAJJA CONNECTED PLUMBING FITTINGS AND ALLIED WORKS IN ENGINE HOUSE ROAD HB ROAD SF ORS JCOS ACCN SARVATRA VIHAR AND ACCN OF STN HQ KIRKEE OF ZONE A AREA UNDER AGE BR I GE CENTRAL KIRKEE.

Amount

NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.

Taking down chowkats and frame area exc. 1.5 sqm but n.exc. 4.00 sqm each including shutters without taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame area n.exc 1.5 sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description area exc. 1 sqm and but n.exc 2sqm each and removing to store complete all as specified and as directed.

Taking down and rexing in same opening with resecuring or easing & adjusting door shutters of any description area exc. 1 sqm and n. exc. 2 sqm each complete all as specified and as directed.

Supply and fix pressed steel frames of size 105x60mm made out of 1.25 mm thick MS Sheet suitable for doors, ventilators with single rebate including necessary fixing lugs, hinges, lock strike plate etc, including material and labour for providing plain cement concrete (1:2:4), type B1 using 20mm graded stone aggregate to fill the frame and making good complete all as specified and as directed.

Supply and fix pressed steel frames of size 125x60mm made out of 1.25 mm thick MS Sheet suitable for doors, ventilators with single rebate including necessary fixing lugs, hinges, lock strike plate etc, including material and labour for providing plain cement concrete (1:2:4), type B1 using 20mm graded stone aggregate to fill the frame and making good complete all as specified and as directed.

Supply and fix flush shutters 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, covered with decorative face verneers with lipping/frame to match complete all as specified and as directed.

Supply and fix 35mm thick second class hard wood plain, framed factory made panelled shutters (any numbers of pannels) with panels of timber flat on both side (feathered edges) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkat complete all as specified and as directed.

Material and labour for 35 mm thick second class hard wood glazed/gauzed and skelton door shutters, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and as directed.

Supply and fix 200mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed.

Supply and fix 150mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Supply and fix 250mm long Mild steel sliding door bolts, black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Supply and fix factory made internal PVC door frame of size 50x47mm single rebated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.

Matwrial and labour for Factory made solid PVC double moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawings.

Supply and fix 75mm long stainless steel medium weight butt hinges for door shutter and frames complete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.

Supply and fix aluminium anodised handle, oval type, of size 150mm, fixed with screws or welded, complete all as specified and as directed.

Material and labour for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and as directed.

Supply and fix three track aluminium alloy powder coated windows including aluminum powder coated frame sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM, double rebated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section for sliding windows with framed shutter including aluminium alloy powder coated snap type beads, handles with locking arrangement spring action and glazing clip, joint cleats, rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings complete all as specified and as directed.

Supply and fix for aluminum alloy powder coated door including frame and channel of section (door frame single groove 101.6mm x 44.45mmx1.25mm, shutter top section 47.62mm x 44.45mmx1.25mm thick, shutter bottom section 114.30mm x 44.45mm x 1.25mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.25mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutters fixed to sliding type / openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass / 12mm thick prelaminated particle board as required including handles, tower bolt, door stopper complete all as specified and as directed.

Supply and fix aluminium alloy powder coated glazed or skelton shutter including frame of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to frame as directed and as per IS specifications including Supply and fix mild steel wire cloth 0.56mm dia and apperture 1.4mm and required handles, tower bolt,rubber gasket complete.

Supply and fix aluminium louvered ventilators of section size 80mm x 20mm x 1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed.

Supply and fix door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and as directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix rolled mild steel as in window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Hacking out old broken glass area exc. 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Material and labour for second class hard wood, as in plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc. 13 sq,cm but n. exc. 25 sq.cm including dismantling existing as in unframrd work, complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Material and labour for second class hard wood as in plain solid straight chowkhats / frame, wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix in repairs 18-19mm thick prelaminated particle board prelaminated one side, grade 2 quality, interior grade, commercial type including 6 mm thick teak wood lipping, as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

Supply and fix in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) in 40mm complete all as specified and as directed.

Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Supply and fix in repairs 75mm hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix in repairs 300mm long, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm complete all as specified and as directed.

Running welding in repair thickness of metal to be welded n.exc. 6mm complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 10 mm thick on concrete surfaces in CM (1:6), finished with sagol finish on plastered surface of internal walls, complete all asspecified and as directed.

Material and labour for rendering 20 mm thick in two layers on stone masonry surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick plaster in CM(1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even mixed with and including supply of water proofing compound all as specified and as directed.

Material and labour for preparing newly plastered surfaces of wall including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer on wall surfaces complete as specified and as directed.

Material and labour for preparation of new or previously un treated surfaces (plastered or un-plastered) of walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Supply and fix collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking down existing collapsible steel gates complete all as specified and as directed.

Supply and fix 20mm dia curtain rails, anodised aluminium alloy with brackets, stops, rollers etc for door and windows complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified and as directed.

Supply and fix in repairs rolled mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Supply and fix steel rolling shutters, thickness of laths in 1.25mm with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push, pull or manual type including taking down existing rolling shutters, complete all as specified and as directed.

Material and labour for preparation of new or previously un treated surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of aluminium paint complete all as specified and as directed.

Disconnecting existing tanks 500 ltr to 1000ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes complete all as specified and as directed.

Supply and fix four layered rotational moulded polythene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position and 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball all as specified in SSR part-I (2009) including dismantling of existing water tank RCC or PVC any type and any position complete all as specified and as directed.

All as per Sl item No, 56 above but 1000 ltr capacity.

Supply and fix 110mm dia PVC (SWR) pipes, type 'B' single socketed in any length with rubber rings joints fixed to walls or laid in floors in sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and directed.

All as per Sl Item No 60 above but 75mm dia.

Supply and fix in repairs PVC (SWR) bend, type 'B' with access door of any radius 110mm bore complete all as specified and directed.

Supply and fix in repairs PVC (SWR) bend, type 'B' with access door of any radius 75mm bore complete all as specified and directed.

Supply and fix in repairs PVC (SWR) junction, type 'B' single, (Single T) equal or unequal with access door complete all as specified and as directed.

Material and labour for rendering or bedding layer of cement mortar (1:3), 15 mm thick laid over the RCC roof slab, facing of slab and chajja mixed with and including supply of intgral liquid water proofing compound including taking down existing screed bed/plaster complete all as specified and as directed.

Material and labour for water proofing treatment with 3mm thick APP membrane polymer based to roof slab including taking down existing water proofing treatment of any type and removing the rubbish from the site to a distance exc. 500mtrs and n.exc. 1000 mtrs and deposited in low lying areas complete all as specified and as directed by Engr-in-charge comprising of the following:- (a) Applying one coat of bituminous primer @ 0.25kg/sqm. (b) Laying 3mm thick APP polymer modified membrance by torch application method. (c) 24 hours ponding test after laying WP membrane. (d) Applying a coat of solar reflective bituminous aluminum paint @ 0.15kg/sqm.

Material and labour for PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour for vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

Supply and fix 15 mm bore dia steel water tubing, medium grade, galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing complete all as specified and as directed.

Supply and fix 20 mm bore dia steel water tubing, medium grade, galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM (1:6) including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Supply and fix in repair PVC floor/Nahani trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

Supply and fix Bib taps, 15mm bore long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down,screwed for iron pipe or for brass ferrule all as per Prayag Cat No 8308 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repair Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, 15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs 32 mm bore PVC waste pipe 1000mm long of approved make suitable for WHB, urinals etc all as specified and as directed.

Kitchen sink with drain board overall size 915x460mm, bowl size 410x330x160mm made out of stainless steel 1mm thick kitchen or laboratary sink with plugs, washers and waste including bedding in mortar on to dwarf wall, fixing cantilever brackets and connecting union pipes complete in repairs including taking down the existing sink complete all as specified and as directed. MAKE:- Diamond / Nirali / Prayag

Supply and fix in repairs PTMT body health faucet with 1mtr long braided rubber hose pipe and wall hook, fixed in repairs all as per Cat No. BEA-84 of Prayag or techno commerical equivalent models in Essco / Parryware / Hindware complete all as specified and as directed.

Supply and fix in repairs Pillar taps, 15mm dia, long body/swan neck, fancy type suitable for fixing to wash basin screwed for iron pipe and fixed with necessary fittings and including PVC connection all as per CERA Cat Part No F2004301or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Material and labour for factory made fibre glass reinforced plastic (FRP)''CHAJJA", 4 mm thick of 'fibre way' brand or equivalent in required colour,size and design made by resin transfer moulding (RTM) machine technology, resulting in void free compact laminate in single piece, having smooth gradual slope cuvature for easy drainage of water and duly reinforced by 2 Nos of verticals, 1 No of horizontal made out of 50x2 mm thick MS flat with 12 mm in built hole for grouting on the exixting wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necesssary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS: 6746 duly reinforced with fibreglass chopped strand mat (CSM) as per IS:11551 complete with protective Gelcoat U/V coating on top for complete resistance from the extreme temperature, wheather and sunlight complete all as specified and as directed.

Material and labour for water proofing treatment to external walls and chajja by applying two coats of elastomeric coating material after cleaning the surfaces and exposing and opening all visible cracks throughly and sealing all with acrylic sealing compound as per manufacturer specification and direction of EIC. Make:- Dr fixit or equivalent as approved by GE

Material and labour for for removing the leaking outlet bends of 100mm or 75mm and repairing leaking joints by PVC solvent of ordinary cement and closing the gap in outlet by cement sand mortar for making leakage free duct walls follwed by removal of weeds and vegetation on outlet side with hand tools only and injecting Monsanto's herbicide to prevent the growth of new plants in future, finishing. (New changing of fittings, unserviceable pipes, bend and nahni traps will be measured and paid separately)

Material and labour for water proofing of balcony and other exposed roof other than APP treated surfaces:- (i) Clean the surface free of oils, grease, dust particle etc, washing the area with all major visible cracks to be filled with chemistik crackseal compound. (ii) On prepared surface one coat of Chemistik clear Waterproof coating will be applied and allow to dry for 4 to 6 hours. If subsequent coats are required, it will be applied after an interval of 6 hours, between each coat. (iii) Followed by final two coats of Chemistik white water proofing compound on prepared surface, allowing it to dry for 8 hours. Application of second coat as above. Every subsequent coat if applied, should be at an iterval of 8 hours between each coat.

Material and labour for repairing the leaking deteriorated and torn out chajjas and parapet walls by removing all the lose materials from the top of the chajja by means of light hammering and chiselling, removing loose concrete cover only and clean all loose particles by high pressure jet water so that all surfaces should be sound, clean and free of contamination followed by appication two coats of polymerised cementitious coat like Pidilites Pidifin 2k or equivalent, while second coat is wet apply a 10mm dash coat of cement plaster with the waterproofing compound, completing the repair work by final finishing and providing proper slope of 15 mm thick rendering to prepared surface in cement mortar (1:4) finishing the surfaces even and smooth using extra cement including supply and mixing of water proofing compound as per manufacturers instruction complte all as specified and as directed. Make :- Dr.Fixit or equivalent as approved by GE,

Patch wise Repairs of existing leaking APP membrane :- Material and labour for for cleaning and removing of dust from the existing membrane and application of one coat of MEMBRANE PRIMER BLACK of star coating or equivalent followed by after 8 hours of priming for application of two coat MEMBRANE SEALER WHITE complete all as specified and directed.

Supply and fix in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

L.K.R.TIWARI CONSTRUCTION