Construction of new anganwadi building in Kombadikuppam village at Uthangal panchayat

Amount

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.

Filling with river M-Sand including cost and coveyance of all materials to work site and all labour charges etc.

Providing US Gravel packing for side berm including all charges etc complete including cost and coveyance of all materials to work site and all labour charges etc.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete Upto basement

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. Above basement

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Upto Basement

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.For Above basement

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Roof

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering M.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) 20MM thickness

Plastering with cement mortar 1:3, 20mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

Paving the floor with kotta stone of size 610x610x 20mm cm 1:3 20mm thickcomplete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental

Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 150x150x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to

Towards the cost of steel door of size 1.10mx2.40 m including all charges etc.

Towards the cost of steel door of size 0.75mx1.50 m including all charges etc.

Towards the cost of steel door of size 0.90mx2.40 m including all charges etc.

Towards the cost of steel Window of size 1.20mx1.60 m including all charges etc.

Towards cost and fixing of Exhaust fan including cost and conveyance and labour for fixing etc Exhaust fan

Towards cost and fixing of Exhaust fan including cost and conveyance and labour for fixing etc Steel Ventilator V(0.60X.45)

Towards cost and fixing of Exhaust fan including cost and conveyance and labour for fixing etc Steel Ventilator V1(0.90X.45)

Provision for electrification arrangements with service connection Light point

Tube Light fitting

Fan point

Plug point

CFL lamp

DPI swtich of 500 V

G I Pipe

Service Wire

E B Deposit

Painting two coats Emulsion paint over cement plastered wall including cost and conveyance of all materials to site and all labour charges etc complete ( I

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Towards the cost and supply of Indian type water closet including etc .

Towards the cost and supply of Europien type water closet including etc .

Towards the cost and supply of 4" Rainwater Downfall pipe fixing with clamps etc .

Towards the cost and supply of Cuddapah slab for Shelf including etc complete.

Provision for Rcc precast rings to RWH arrangements

Provision for Rcc precast slab RWH arrangements

Provision for PVC Pipe 3" Dia for septic tank

Provision for Syntex tank and water supply arrangements

Provisionm for Name Board charges

K.Manikandan (BID ID -1442493)