Macadamization of road at Industrial Estate Barzulla(Sanat Nagar)

Amount

Supplying, Laying, Stacking, Spreading and compacting stone aggregate to specific size of water bound macadam specification including spreading in uniform thickness, hand-picking, rolling with smooth wheel roller 80 – 100 KN in stages to proper grade, camber, applying and brooming, stones screening to fill up the interstices of course aggregate, watering and compacting to the required density grading 3 as per technical specification Clause 405 including cost and carriage of material from approved source to site of work with all leads, lifts, loading, uploading including Carriages

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lift and lead up to 1km (by mechanical means). including Carriages

Providing and applying track coat using hot straight run bitumen of VG – 10 grade including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface to remove all dirt, dust, mud etc. and finally brooming he surface as including Carriages

Providing and laying bituminous macadam using crushed stone aggregate of specified grading premixed with bituminous binder, transported to site by tipper, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smoothed wheeled, vibratory and tandem rollers a per specification to achieve the desired compaction and density, complete as per specification and direction of Engineering – In – Charge. (50 to 100mm average compacted thickened with bitumen of grade VG – 10 @ 3.5% (percentage by including Carriages

Providing and laying 25mm thick semi – dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer – In – Charge. (25mm compacted thickness with bitumen of grade VG – 10 @ 5%( percentage by weight of total mix) and lime filler @ 2%(percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100 – 120 aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 128kg of bitumen of grade VG – 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road complete job. including Carriages

G.N Builders (BID ID -2228136)

M/S TRM CONSTRUCTION CO (BID ID -2228785)

M/S BROAD ROAD CONSTRUCTION COMPANY (BID ID -2227858)

Bismillah Road Construction Company (BID ID -2224999)

Sharp construction company (BID ID -2227562)

DAR & Co. (BID ID -2228045)

M/S GLOBAL INFRACON WET/HOT MIX PLANT (BID ID -2227809)

M/S Vast Way Construction (BID ID -2228373)