Construction of Health sub centre at Veikalipatty village in Kadayamperumpathu panchayat.

Construction of Health Sub Centre in Veikalipatty village in Kadayam Perumpathu Pachayat in Kadayam Panchayat Union ( TNK25HEA004 ),Kadayam Panchayat Union Under SADP - 2025 - 2026

Earth work excavation for foundation in all soils and sub-soi ls and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling of conveyed Earth by lorry in basement filling including stacking for premeasurement, conveyance loading, and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in Cement Mortar 1:5 using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification.

Upto Basement

Above Basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25 mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)

Below Basement

Above Basement to GF

Reinforced Cement Concrete M2O - 1:1.5:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement I' ortar 1: 3 (One Cement and Three Sand) etc., complete complying with standard specification and as directed by the departmental officers Below Basement

Below basement

Above Basement

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32 : 12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing with one course of pressed tiles of size 23x23x2cm with cm 1: 3 pointed with same mortar including all cost and conveyance of materials to site and all labour charges etc completed

Flooring with Vitrified tiles size 600x60Ox8mm laid over 20 mm thick cement mortar 1: 3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colourinq pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1 :3, 20mm thick

Dadooing walls with best approved quality, colour glazed tiles of 150mm x 150 mm x 6mm size set in Cement Mortar 1:2 (One Cement and Two sand) 10 mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing i n position best approved of BiS quality PVC rain water down faII pi pes of 110 mm dia., having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, CaSt iron gra tings o f required diameter and special clamps, brass screws, nails, ecc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. {The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of Paris putty, wherever required etc., complete complying with standard specification.

Vol I P. 108 Supply and Fabrication of UPVC door including cost and conveyance of all charges etc complete.

Vol I P. 81 Solid PVC Door Shutters using 19 Gauge 19mm I' S square tubes for styles and outer frames. 15 mm US square tubes for top, lock and bottom rails. The steel tubes shall be covered with Smm thick solid PVC Sheets. Shutter using Smm thick solid PVC Sheets for panelling sha |I rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm

Vol I P. 109 Supply and Fabrication of UPVC Window including cost and conveyance of all charges etc complete.

Vol I P. 109 Supply and Fabrication of UPVC Ventilator including cost and conveyance of all charges etc complete.

Providing, fabricating and fixing M.S. grills Windows, and ventilator,gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer.

Vol I P. 98 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete (PWD M0652)

Vol I P. 88 Supplying and fixing in position best Indian make White glazed earthen ware Oriya type Indian Water Closet

Vol I P. 88 Supplying and fixing in Europeon Water Closet with all fittings and 10Iit capacity flusing tank

Vol I P. 89 Supplying and fixing white glazed earthen ware Wash hand basin of size 550x400mm

Vol I P. 96 Supplying and fixing Manhole cover 60 x 60 cm (heavy duty) with frame steel manhole cover including all cost and conveyance etc complete.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Supply and Delivery of 2000 Lit HDPE Tank including all charges

Electrical Arrangements

Concealed Light / Fan point SD 25

Plug point SD 38

Concealed Power Plug Point SD 40

Ceiling Fan SD 107

Exhaust Fan SD 114

4' 36W Crystal Glass LED Tube Light Fitting SD 87

LED Bulb 9W SD 82

TNEB meter board SD 131

Service Connection SD 66

Earth Connection SD 74

Borewell Arrangements

Supply and Delivery of 2.00 HP (20X150)LPM Head Submersible Pupmset etc, complete

Errection of 2.00 HP (50x100)LPM Head Submersible Pupmset etc, complete

Supply and Delivery of 40 mm HDPE ( M-1057 ) pipe Including all materials and Labour Charges etc, complete.

Supply and Delivery of 2.00 HP Single Phase Panel Board Including all materila to site and all labour Charges etc, complete.

Supply and Delivery of 2.500 Sqmm 3 core Copper Cable Including all albour Charges etc, complete.

Supply and Delivery of Nylon Rope Including materil to site and all labour Charges etc, complete

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information