Residual Work of at NPS Kaim Basti Bagicha, Block- Bahadurganj, District- Kishanganj, Group No- PRIM-8A

BIHAR STATE EDUCATIONAL INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA.

Bill of Quantities for Residual Work of at NPS Kaim Basti Bagicha, Block- Bahadurganj, District- Kishanganj, Group No- PRIM-8A

Amount of B.O.Q. for Schedule Item (In Rs.) :- ₹ 1,822,906.00

Amount of E.M.D. (In Rs.) :- ₹ 36,000.00

Tender Fee- 5,000/- Time of Completion- 2 Months

Rates are based on SOR 2022 (w.e.f. 01.01.2022) for Civil & SOR 2023 for Electrical Works

Sl. No. SOR Item No. Item of Work Unit

Quantity Rate (Rs.) Amount (Rs.)

1 2.8.1 Earthwork in excavation in as(exceeding 30cm in depth. 1.5m in width as well es 10sqm on plan) incloding dressing of sides and ramming of bottom,lift upto 1.5 including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m. All Kind of soil cu.m 55.17 360.70 19899.82

2 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m All kinds of soil. 100 sqm 0.99 13.554 13.42

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead cu.m 25.34 123.90 3139.63

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. cu.m 6.30 287.30 1809.99

5 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, sq.m 170.75 283.30 48373.48

6 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all work upto plinth level. 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) cu.m 1.42 2975.20 4224.78

7 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all work upto plinth level 1:3:6 (1cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) cu.m 14.67 3434.00 50376.78

8 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness sqm 799.40 to be specified by the manufacturer) of ist quality conforming to IS :15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4coarse sand) including pointing the joints with white cement and matching pigment etc., complete. sq.m 11.48 686.80 7884.46

9 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sq.m 43.05 795.00 34224.75

10 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. sq.m 101.07 289.10 29219.34

11 11.6.1 Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. 18 mm thick sq.m 34.98 304.15 10639.17

12 5.1.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & reinforcement - all work upto plinth level. 1:1:2 (1cement: 1 coarse sand : graded stone aggregate 20mm nominal size) cu.m 0.00 5961.90 0.00

13 5.2.1 Reinforced cement concrete work in wall (any thickness), including attached plasters, buttresses, plinth and struts etc upto floor five level excluding the cost of centring, shuttering, finishing & reinforcement - all work upto plinth level. 1:1:2 (1cement: 1 coarse sand : 2 graded stone aggregate 20mm nominal size) cu.m 0.00 6943.50 0.00

14 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level. 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) cu.m 0.93 4232.40 3936.13

15 5.33A.2.1 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement,Walls columns, pillars, posts cind struts M-20 grde reinforcd cement concrete All works above plinth level upto floor V level Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cu.m 0.00 5458.00 0.00

16 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in cement mortar 1:6 (1cement :6 coarse sand) cu.m 4.92 4819.90 23713.91

17 6.1.14A + 6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum cu.m 7.80 5662.10 44164.38

18 6.18.4A+6.19A Half Brick work with Brick of 100A cement Mortar (1:4) sq.m 0.00 689.00 0.00

19 6.21A Extra for providing and placing in position 2 no 6mm bar … sq.m 0.00 113.60 0.00

20 6.1A+6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) cu.m 8.75 5017.90 43906.63

21 13.13.4 20 mm cement plaster of mix ; 1:6 (1 cement : 6 coarse sand) sq.m 264.08 192.10 50729.77

22 13.13.1+13.26 20 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & neat cement punning sq.m 16.65 268.10 4463.87

23 13.11.4 12mm thick Cement plaster of mix 1:6 (1 cement : 6 coarse sand) sq.m 370.15 141.50 52376.23

24 13.17.1+13.36.1 12 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) sq.m 52.92 212.6 11250.79

25 13.24.2 6mm thick Cement plaster of Ceiling mix 1:4 (1 cement : 4 coarse sand) sq.m 137.65 125.70 17302.61

26 11.3.1 + 11.8 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavemerts etc. sq.m 161.63 325.40 52594.40

27 13.79.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sq.m 836.66 81.20 67936.79

28 13.78.1 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sq.m 1344.46 38.60 51896.16

29 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer sq.m 507.80 102.30 51947.94

30 13.81.1 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) sq.m 49.90 39.70 1981.03

31 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work. sq.m 38.07 34.60 1317.22

32 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work sq.m 58.65 84.50 4955.93

33 10.1 Structural steel work in singal section fixed without connecting plate including cutting.hoisting,fixing in position and applying a priming coat of approved steel primer all complete. Kg. 160.65 88.30 14185.40 39.00

34 9.21.1 Providing and fixing flush door shutters conforming to IS : 2202 (Part-I) non-decorative type.core of block board construction with frame of 1st class tiard wood and well mathched commercial 3 ply veneering wiih vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including anodized aluminum butt hinges with necessary screws sq.m 20.79 1775.30 36908.49

35 9.63.1 Providing and fixing oxidised M.S.tower bolt black finish,(barrel type) with necessary screws etc.complete 250x10mm each 20.00 70.10 1402.00

36 9.66.1 Providing and fixing M.S.handles with necessary screws etc.complete 125 mm each 10.00 32.40 324.00

37 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc.complete:Twin rubber stopper each 10.00 60.80 608.00

38 9.62.1 Providing and fixing M.S. sliding door bolts bright finished or/and black enamelled,with nuts and screws etc.compelled: 300x16 mm each 10.00 169.00 1690.00

39 10.12.1 + 10.13B Providing and fixing glazed steel doors, windows or ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm M.S. lugs10cm long with steel legs embedded in cement concrete blocks 15x10x10cm.of (1:3:6) (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panels with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer excluding the cost of metal beading and other fitting except necessary hinges or pivots as required Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows,ventilators and composite units. sq.m 11.52 3038.90 35008.13

40 10.12.1 + 10.13C Providing and fixing glazed steel doors, windows or ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm M.S. lugs10cm long with steel legs embedded in cement concrete blocks 15x10x10cm.of (1:3:6) (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panels with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer excluding the cost of metal beading and other fitting except necessary hinges or pivots as required Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows,ventilators and composite units. sq.m 0.72 3444.20 2479.82

41 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats square or round bars etc all complete fixed to steel windows by welding. Kgs. 458.70 144.50 66282.15

42 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

43 10.17 Providing & fixing M.S. Fan hook of 16 mm. dia. M.S. bar 1 Mtr. Long bent to required size and shape, placed in position and fixed in Truss Frame / RCC Slab / beam at the time of casting all complete as per building specification and direction of E/I. (Where materials is not supplied by deptt.) Each 54.98 174.60 9599.51

44 10.33.1 Providing & fixing hand rail by welding etc. to steel ladder railling & staircases railling including applying a priming coat of approved steel primer. MS tube (medium) 40mm nominal bore. kg. 75.00 121.90 9142.50

45 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. sq.m 8.61 6303.40 54272.27

MISCELLANEOUS WORK

46 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth. sq.m 54.98 436.60 24004.27

47 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, basees of columns etc. for mass concrete. Sqm. 38.86 211.60 8222.78

48 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for lintel, beams, plinth beams, griders, bressumers and contilevers. Sqm. 0.00 404.70 0.00

49 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts Sqm. 36.88 494.40 18233.47

50 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. Sqm. 32.81 437.50 14354.38

Plumbing & Sanitary Works

51 17.1.1 Providing and fixining water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with munally controlled device (handle level) conforming to IS : 7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous China Orissa pattern W C pan of size 580 x 440 mm with integral type foot rest. Each 2.00 4470.90 8941.80

52 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 2.00 2135.80 4271.60

53 17.10.1.1 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: kitchen sink with drain board Size 510 x 1040mm bowl depth 225 mm Each 1.00 5231.50 5231.50

54 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms Each 4.00 136.60 546.40

55 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia Each 2.00 104.40 208.80

56 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 x 357 mm Each 2.00 857.00 1714.00

57 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 2.00 713.30 1426.60

58 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I Concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia Pipes metre 10.00 278.20 2782.00

59 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes metre 10.00 294.70 2947.00

60 18.9.4 32 mm nominal outer dia Pipes metre 10.00 359.10 3591.00

61 18.9.2 20 mm nominal outer dia Pipes metre 10.00 205.30 2053.00

62 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 2000.00 9.70 19400.00

63 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Each 6.00 434.20 2605.20

64 18.52.1 Providing and fixing C.P. brass stop cock (concealed of standard design and of approved make conforming to IS : 8931 15 mm nominal bore. Each 4.00 594.80 2379.20

65 18.58.1.1 Providing and fixing P.T.M.T. grating of approved quality & colour circular type 100 mm nominal dia, Each 10.00 33.20 332.00

66 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe metre 10.00 494.40 4944.00

67 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe metre 10.00 410.70 4107.00

68 19.27.1 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 3743.30 3743.30

69 19.30.1.1 Contructing brick masonry chamber for Underground C.I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455x610 mm internal dimentions, total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg.) RCC top slab with 1:1.5:3 mix (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1cement:3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 466x610 mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 4266.80 4266.80

70 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with brick and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 33603.40 33603.40

71 19.34.1 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm dia Each 2.00 319.60 639.20

72 Detailed Estimate for construction of 125 mm x 40 mm x 90 mm Tube well Manual Boring Each 1.00 128377.40 128377.40

73 NON SHEDULE ITEM

DOOR TEE 110 mm dia Each 2.00 365.00 730.00

DOOR BEND 110mm dia Each 4.00 283.00 1132.00

BEND 45 110 mm dia Each 5.00 185.00 925.00

VENT COWEL 110 mm dia Each 2.00 65.00 130.00

PIPE CLIP 110 mm dia Each 30.00 53.00 1590.00

FLOOR TRAP 110 X 110 mm dia Each 5.00 436.00 2180.00

74 CODE NO OF 1352 (i)C I cover and frame 300 x 300 mm inside SEPTIC TANK Each 1.00 480.00 480.00

75 CODE NO OF 1621 (I)S C I plain bend 100 mm dia SEPTIC TANK Each 1.00 280.00 280.00

76 CODE NO OF 7087 (I)S C I plain tee 150 mm dia SEPTIC TANK Each 1.00 570.00 570.00

CARRIAGE OF MATERIALS

77 Type of materials

c Local Sand cum 8.86 316.15 2801.09

d Stone Chips cum 25.30 2000.62 50615.69

e Brick Thous. 16.11 958.51 15441.60

78 Add Extra Cost Of Material

a Brick Thous. 16.11 804.92 12967.26

79 SEIGNIORAGE FEES

(A) Coarse Sand Cum 34.100 17.58 599.48

(B) Local Sand Cum 8.860 14.19 125.72

(C) Stone Chips Cum 25.300 59.54 1506.36

Add 18% GST instead of 12% GST @ 1.0536 Multiply Factor, Total (A)= 1,641,043.59

Electrical Work

80 1.1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch,phenolic laminated sheet, suitable size M.S./PVC box etc as required. Group C nos 25.00 1120.00 28000.00

81 1.29 Supplying and fixing metal/pvc box of 150mm X 75mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connections, painting etc. as required. Each 4.00 306.00 1224.00

82 1.30 Supplying and fixing metal/pvc box of 180mm X 100mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required. nos 2.00 424.00 848.00

83 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x2.5 Sqmm + 1x2.5 sq mm earth wire Each 50.00 246.00 12300.00

84 1.7.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x4 Sqmm 1x4 sqmm earth wire (to be used as sub main) Mtrs. 40.00 309.00 12360.00

85 1.23 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

1.23.1 5/6 amps switch Each 8.00 37.00 296.00

1.23.4 3 pin , 5/6 amps socket outlet Each 8.00 55.00 440.00

86 1.15 Circuit sub-main wiring pvc conduit

1.15.30 3x6.0 sqmm earth wire (to be used as sub main Mtrs. 20.00 308.00 6160.00

87 2.12.1 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, Single pole Each 1.00 237.00 237.00

88 2.13.2 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable form inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps, Double pole Each 1.00 1575.00 1575.00

89 2.8.5 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 12 way, single door Each 1.00 2197.00 2197.00

90 1.33 Supplying and fixing 2 pin, 6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 19.00 64.00 1216.00

91 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 6.00 80.00 480.00

92 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Each 8.00 358.00 2864.00

93 3.5 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry encloser with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke ans salt as required. Each 1.00 12415.00 12415.00

94 3.8 Supplying and lying 25mm x 5 mm copper strip at 0.50 metre velow ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping ans with 2 seats of barss nut bolt & spring asher spaced at 50mm) mtr 9.00 1026.00 9234.00

95 3.1 Supplying and lying 25mm x 5 mm copper earth strip in surface/recess mtr 12.00 5033.00 60396.00

96 7.1.1 3.5 core, 35 sq.mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conducter mtr 10.00 315.00 3150.00

97 9.1.21 1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1KV grade as required. 3.5 Core 35 Sq.mm3.5 core 35 sqmm XLPE/PVC insulated pvc sheathed armoured electrical cable with aluminium conducter . Each 1.00 415.00 415.00

98 2206 BSR 3.5 core, 35 sq.mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conducter mtr 1.00 292.00 292.00

99 2.5.2 Providing & fixing follwing capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections. 200 amps Each 1.00 5019.00 5019.00

100 2.6.2 Provinding and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc. as required. 100 amps TP&N Each 1.00 4418.00 4418.00

101 4.5 Supplying and lying 20mm x 3 mm copper strip at 0.50 metre velow ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping ans with 2 seats of barss nut bolt & spring asher spaced at 50mm) Each 20.00 516.00 10320.00

102 4.6 Supplying and lying 20mm x 3 mm copper strip at 0.50 metre velow ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping ans with 2 seats of barss nut bolt & spring asher spaced at 50mm) Each 10.00 559.00 5590.00

103 4.2 Provinding and fixing of lighting conductor finial made of 25 mm dia 300 mm long copper tube Each 1.00 416.00 416.00

BIHAR STATE EDUCATIONAL INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA.

Bill of Quantities for Residual Work of at NPS Kaim Basti Bagicha, Block- Bahadurganj, District- Kishanganj, Group No- PRIM-8A

Amount of B.O.Q. for Schedule Item (In Rs.) :- ₹ 1,822,906.00

Amount of E.M.D. (In Rs.) :- ₹ 36,000.00

Tender Fee- 5,000/- Time of Completion- 2 Months

Rates are based on SOR 2022 (w.e.f. 01.01.2022) for Civil & SOR 2023 for Electrical Works

Sl. No. SOR Item No. Item of Work Unit

Quantity Rate (Rs.) Amount (Rs.)

1 2.8.1 Earthwork in excavation in as(exceeding 30cm in depth. 1.5m in width as well es 10sqm on plan) incloding dressing of sides and ramming of bottom,lift upto 1.5 including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m. All Kind of soil cu.m 55.17 360.70 19899.82

2 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m All kinds of soil. 100 sqm 0.99 13.554 13.42

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead cu.m 25.34 123.90 3139.63

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. cu.m 6.30 287.30 1809.99

5 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, sq.m 170.75 283.30 48373.48

6 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all work upto plinth level. 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) cu.m 1.42 2975.20 4224.78

7 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all work upto plinth level 1:3:6 (1cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) cu.m 14.67 3434.00 50376.78

8 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness sqm 799.40 to be specified by the manufacturer) of ist quality conforming to IS :15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4coarse sand) including pointing the joints with white cement and matching pigment etc., complete. sq.m 11.48 686.80 7884.46

9 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sq.m 43.05 795.00 34224.75

10 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. sq.m 101.07 289.10 29219.34

11 11.6.1 Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. 18 mm thick sq.m 34.98 304.15 10639.17

12 5.1.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & reinforcement - all work upto plinth level. 1:1:2 (1cement: 1 coarse sand : graded stone aggregate 20mm nominal size) cu.m 0.00 5961.90 0.00

13 5.2.1 Reinforced cement concrete work in wall (any thickness), including attached plasters, buttresses, plinth and struts etc upto floor five level excluding the cost of centring, shuttering, finishing & reinforcement - all work upto plinth level. 1:1:2 (1cement: 1 coarse sand : 2 graded stone aggregate 20mm nominal size) cu.m 0.00 6943.50 0.00

14 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level. 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) cu.m 0.93 4232.40 3936.13

15 5.33A.2.1 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement,Walls columns, pillars, posts cind struts M-20 grde reinforcd cement concrete All works above plinth level upto floor V level Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. cu.m 0.00 5458.00 0.00

16 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in cement mortar 1:6 (1cement :6 coarse sand) cu.m 4.92 4819.90 23713.91

17 6.1.14A + 6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum cu.m 7.80 5662.10 44164.38

18 6.18.4A+6.19A Half Brick work with Brick of 100A cement Mortar (1:4) sq.m 0.00 689.00 0.00

19 6.21A Extra for providing and placing in position 2 no 6mm bar … sq.m 0.00 113.60 0.00

20 6.1A+6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) cu.m 8.75 5017.90 43906.63

21 13.13.4 20 mm cement plaster of mix ; 1:6 (1 cement : 6 coarse sand) sq.m 264.08 192.10 50729.77

22 13.13.1+13.26 20 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & neat cement punning sq.m 16.65 268.10 4463.87

23 13.11.4 12mm thick Cement plaster of mix 1:6 (1 cement : 6 coarse sand) sq.m 370.15 141.50 52376.23

24 13.17.1+13.36.1 12 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) sq.m 52.92 212.6 11250.79

25 13.24.2 6mm thick Cement plaster of Ceiling mix 1:4 (1 cement : 4 coarse sand) sq.m 137.65 125.70 17302.61

26 11.3.1 + 11.8 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavemerts etc. sq.m 161.63 325.40 52594.40

27 13.79.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sq.m 836.66 81.20 67936.79

28 13.78.1 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sq.m 1344.46 38.60 51896.16

29 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer sq.m 507.80 102.30 51947.94

30 13.81.1 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) sq.m 49.90 39.70 1981.03

31 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work. sq.m 38.07 34.60 1317.22

32 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work sq.m 58.65 84.50 4955.93

33 10.1 Structural steel work in singal section fixed without connecting plate including cutting.hoisting,fixing in position and applying a priming coat of approved steel primer all complete. Kg. 160.65 88.30 14185.40 39.00

34 9.21.1 Providing and fixing flush door shutters conforming to IS : 2202 (Part-I) non-decorative type.core of block board construction with frame of 1st class tiard wood and well mathched commercial 3 ply veneering wiih vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including anodized aluminum butt hinges with necessary screws sq.m 20.79 1775.30 36908.49

35 9.63.1 Providing and fixing oxidised M.S.tower bolt black finish,(barrel type) with necessary screws etc.complete 250x10mm each 20.00 70.10 1402.00

36 9.66.1 Providing and fixing M.S.handles with necessary screws etc.complete 125 mm each 10.00 32.40 324.00

37 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc.complete:Twin rubber stopper each 10.00 60.80 608.00

38 9.62.1 Providing and fixing M.S. sliding door bolts bright finished or/and black enamelled,with nuts and screws etc.compelled: 300x16 mm each 10.00 169.00 1690.00

39 10.12.1 + 10.13B Providing and fixing glazed steel doors, windows or ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm M.S. lugs10cm long with steel legs embedded in cement concrete blocks 15x10x10cm.of (1:3:6) (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panels with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer excluding the cost of metal beading and other fitting except necessary hinges or pivots as required Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows,ventilators and composite units. sq.m 11.52 3038.90 35008.13

40 10.12.1 + 10.13C Providing and fixing glazed steel doors, windows or ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm M.S. lugs10cm long with steel legs embedded in cement concrete blocks 15x10x10cm.of (1:3:6) (1cement : 3coarse sand : 6graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panels with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer excluding the cost of metal beading and other fitting except necessary hinges or pivots as required Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows,ventilators and composite units. sq.m 0.72 3444.20 2479.82

41 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats square or round bars etc all complete fixed to steel windows by welding. Kgs. 458.70 144.50 66282.15

42 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

43 10.17 Providing & fixing M.S. Fan hook of 16 mm. dia. M.S. bar 1 Mtr. Long bent to required size and shape, placed in position and fixed in Truss Frame / RCC Slab / beam at the time of casting all complete as per building specification and direction of E/I. (Where materials is not supplied by deptt.) Each 54.98 174.60 9599.51

44 10.33.1 Providing & fixing hand rail by welding etc. to steel ladder railling & staircases railling including applying a priming coat of approved steel primer. MS tube (medium) 40mm nominal bore. kg. 75.00 121.90 9142.50

45 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. sq.m 8.61 6303.40 54272.27

MISCELLANEOUS WORK

46 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth. sq.m 54.98 436.60 24004.27

47 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, basees of columns etc. for mass concrete. Sqm. 38.86 211.60 8222.78

48 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for lintel, beams, plinth beams, griders, bressumers and contilevers. Sqm. 0.00 404.70 0.00

49 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts Sqm. 36.88 494.40 18233.47

50 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. Sqm. 32.81 437.50 14354.38

Plumbing & Sanitary Works

51 17.1.1 Providing and fixining water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with munally controlled device (handle level) conforming to IS : 7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous China Orissa pattern W C pan of size 580 x 440 mm with integral type foot rest. Each 2.00 4470.90 8941.80

52 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 2.00 2135.80 4271.60

53 17.10.1.1 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: kitchen sink with drain board Size 510 x 1040mm bowl depth 225 mm Each 1.00 5231.50 5231.50

54 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms Each 4.00 136.60 546.40

55 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia Each 2.00 104.40 208.80

56 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 x 357 mm Each 2.00 857.00 1714.00

57 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 2.00 713.30 1426.60

58 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I Concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia Pipes metre 10.00 278.20 2782.00

59 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes metre 10.00 294.70 2947.00

60 18.9.4 32 mm nominal outer dia Pipes metre 10.00 359.10 3591.00

61 18.9.2 20 mm nominal outer dia Pipes metre 10.00 205.30 2053.00

62 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 2000.00 9.70 19400.00

63 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Each 6.00 434.20 2605.20

64 18.52.1 Providing and fixing C.P. brass stop cock (concealed of standard design and of approved make conforming to IS : 8931 15 mm nominal bore. Each 4.00 594.80 2379.20

65 18.58.1.1 Providing and fixing P.T.M.T. grating of approved quality & colour circular type 100 mm nominal dia, Each 10.00 33.20 332.00

66 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe metre 10.00 494.40 4944.00

67 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe metre 10.00 410.70 4107.00

68 19.27.1 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 3743.30 3743.30

69 19.30.1.1 Contructing brick masonry chamber for Underground C.I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455x610 mm internal dimentions, total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg.) RCC top slab with 1:1.5:3 mix (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1cement:3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 466x610 mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 4266.80 4266.80

70 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with brick and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 33603.40 33603.40

71 19.34.1 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm dia Each 2.00 319.60 639.20

72 Detailed Estimate for construction of 125 mm x 40 mm x 90 mm Tube well Manual Boring Each 1.00 128377.40 128377.40

73 NON SHEDULE ITEM

DOOR TEE 110 mm dia Each 2.00 365.00 730.00

DOOR BEND 110mm dia Each 4.00 283.00 1132.00

BEND 45 110 mm dia Each 5.00 185.00 925.00

VENT COWEL 110 mm dia Each 2.00 65.00 130.00

PIPE CLIP 110 mm dia Each 30.00 53.00 1590.00

FLOOR TRAP 110 X 110 mm dia Each 5.00 436.00 2180.00

74 CODE NO OF 1352 (i)C I cover and frame 300 x 300 mm inside SEPTIC TANK Each 1.00 480.00 480.00

75 CODE NO OF 1621 (I)S C I plain bend 100 mm dia SEPTIC TANK Each 1.00 280.00 280.00

76 CODE NO OF 7087 (I)S C I plain tee 150 mm dia SEPTIC TANK Each 1.00 570.00 570.00

CARRIAGE OF MATERIALS

77 Type of materials

c Local Sand cum 8.86 316.15 2801.09

d Stone Chips cum 25.30 2000.62 50615.69

e Brick Thous. 16.11 958.51 15441.60

78 Add Extra Cost Of Material

a Brick Thous. 16.11 804.92 12967.26

79 SEIGNIORAGE FEES

(A) Coarse Sand Cum 34.100 17.58 599.48

(B) Local Sand Cum 8.860 14.19 125.72

(C) Stone Chips Cum 25.300 59.54 1506.36

Add 18% GST instead of 12% GST @ 1.0536 Multiply Factor, Total (A)= 1,641,043.59

Electrical Work

80 1.1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch,phenolic laminated sheet, suitable size M.S./PVC box etc as required. Group C nos 25.00 1120.00 28000.00

81 1.29 Supplying and fixing metal/pvc box of 150mm X 75mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connections, painting etc. as required. Each 4.00 306.00 1224.00

82 1.30 Supplying and fixing metal/pvc box of 180mm X 100mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required. nos 2.00 424.00 848.00

83 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x2.5 Sqmm + 1x2.5 sq mm earth wire Each 50.00 246.00 12300.00

84 1.7.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x4 Sqmm 1x4 sqmm earth wire (to be used as sub main) Mtrs. 40.00 309.00 12360.00

85 1.23 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

1.23.1 5/6 amps switch Each 8.00 37.00 296.00

1.23.4 3 pin , 5/6 amps socket outlet Each 8.00 55.00 440.00

86 1.15 Circuit sub-main wiring pvc conduit

1.15.30 3x6.0 sqmm earth wire (to be used as sub main Mtrs. 20.00 308.00 6160.00

87 2.12.1 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, Single pole Each 1.00 237.00 237.00

88 2.13.2 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable form inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps, Double pole Each 1.00 1575.00 1575.00

89 2.8.5 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 12 way, single door Each 1.00 2197.00 2197.00

90 1.33 Supplying and fixing 2 pin, 6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 19.00 64.00 1216.00

91 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 6.00 80.00 480.00

92 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Each 8.00 358.00 2864.00

93 3.5 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry encloser with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke ans salt as required. Each 1.00 12415.00 12415.00

94 3.8 Supplying and lying 25mm x 5 mm copper strip at 0.50 metre velow ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping ans with 2 seats of barss nut bolt & spring asher spaced at 50mm) mtr 9.00 1026.00 9234.00

95 3.1 Supplying and lying 25mm x 5 mm copper earth strip in surface/recess mtr 12.00 5033.00 60396.00

96 7.1.1 3.5 core, 35 sq.mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conducter mtr 10.00 315.00 3150.00

97 9.1.21 1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1KV grade as required. 3.5 Core 35 Sq.mm3.5 core 35 sqmm XLPE/PVC insulated pvc sheathed armoured electrical cable with aluminium conducter . Each 1.00 415.00 415.00

98 2206 BSR 3.5 core, 35 sq.mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conducter mtr 1.00 292.00 292.00

99 2.5.2 Providing & fixing follwing capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections. 200 amps Each 1.00 5019.00 5019.00

100 2.6.2 Provinding and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc. as required. 100 amps TP&N Each 1.00 4418.00 4418.00

101 4.5 Supplying and lying 20mm x 3 mm copper strip at 0.50 metre velow ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping ans with 2 seats of barss nut bolt & spring asher spaced at 50mm) Each 20.00 516.00 10320.00

102 4.6 Supplying and lying 20mm x 3 mm copper strip at 0.50 metre velow ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping ans with 2 seats of barss nut bolt & spring asher spaced at 50mm) Each 10.00 559.00 5590.00

103 4.2 Provinding and fixing of lighting conductor finial made of 25 mm dia 300 mm long copper tube Each 1.00 416.00 416.00