REPAIR/CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS, SOAKAGE WELLS AND REPAIR REPLACEMENT OF GATE, REPAIR TO COMPOUND WALL, PATH, DRAIN, FENCING, CULVERT, GARBAGE BINS, SHEDS AND OTHER MISC WORK IN OTM AND MD ACCN IN ZONE-IV AND VI UNDER AGE B/R

Amount

M &L for cleaning of sewage lines,manhole by rodding and well flushing the sewage lines after removing of sludge including taking off the manhole cover and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned manually /mechanical sludge trailor and all sludge to be removed to outside of the cantt area complete all as specified and directed. Note:- ( a ) The contractor shall provide sufficient labours everyday to cater for all type of complaints.(b) the period of complection for each complaints shall be 24 hours .(c) it will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complants.(d) The payment shall be made to the contractor on the basis of complaints slips.No payment shall be done for any incomplete work .(e) The contractor to quote the rates accrodingly.

All as per item No 01.00 here-in-before but cleaning the blockage of WC's, toilets, kitchen, Sink ditto-ditto

Cleaning of sewage lines 150mm bore including man holes gully trap, grees trap etc up to 1.50m deep by removing all silt, foreign material and other deposits what so ever completely and making the lines free from all obsticles and testing the flow of sewer line evenly, smoothely by filling water the operator will carried out in suitable length by blocking the first and last man hole of path and removing the silts/edge out of defence land all as specified and dircted.

Dewatering of Soak well/pit/septic tank any size/capacity including sludge by discharging the sewage water into a sealed tanker with hanze pipe system including vehicle, complaint and disposing outside cantt area all as directed by the Engr-in-Charge.

Material & labour salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150 mm including demoiltion of pipe.

M & L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed.

M & L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channel or drains complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation manholes etc and getting out in loose/soft soil.

M & L 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

Material & labour for brick work with subclass ‘B’ bricks in CM (1:6) straight or curved exceeding 6mtr mean radius Except bricks including cleaning and reusing old bricks complete all as specified and directed.

M&L PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating & necessary formwork as directed by Engr-in-Charge.

M & L rendering 15 mm thick in cm 1:6 on fair faces of brick wall finished even and smooth complete all as specified and directed.

Demolition brick work built in cement mortar including all quoins arches pillars etc

Taking down cement plaster on brick work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as pecified and directed.

Demolition cement concrete in ground floor and paving not exceeding 15 cm thickness (below of above ground level) un-reinforced as in PCC benching PCC bed, PCC sub-base etc.

S & F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking banding spirally including binding with annealed wire not less than 0.9 mm dia complete all as specified and directed.

All as per item No 16.00 here-in-before above but 6 to 8 mm dia complete all as specified and directed.

M & L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls as in soak well/septic tank etc complete ( cast in situ) including as per requirement of form work including demolition of RCC complete all as specified and directed.

M& L Cement concrete as in cover slabs (for manholes etc PCC 1:2:4 type B-1 (20 mm graded aggregate) set in cement mortar 1:6.including as per requirement of form work and Demolition RCC.

M&L PCC 1:4:8 type D2, 75 mm thick (using 40 mm graded stone aggregate) as in as in sub base of flooring complete all as specified and directed.

Material & labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth by using extra cement including demolotion of old PCC complete all as specified and directed .

Supply only 3mm thick and 38 mm wide glass strips as in floor complete all as specified and directed .

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls including stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F in repair PVC (SWR),110mm junction single, (Single T) equal or unequal

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply & fix white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 25 cm in solft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point soil complete all as specified and directed.

S&F RCC jalli Type B-0 (using 12.5 mm graded stone aggregate) size 600x750 of 25mm thick (measured solid) including all factory made moulding complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and directed.

Taking down existing barbed wire of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling chain link fencing wire mess of any type complete all as specified and directed.

Dismantling posts and struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturb ground complete all as specified and directed.

S&F Mild steel angle iron post as in fencing posts, cut to length, drilling holes, welding and embedded in concrete complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed.

Supply only chain link fencing of required dia wire made upto into matresses complete all as specified and directed.

S&F 40x5 mm thick flat iron as in fastening of chain link fencing fixed to nuts and bolts including holes complete all as specified and directed.

S&F Mild Steel flat, round or square bar for straining, in available length, cut to length, bent to shape required Fe-410W (Gde E-250) quality 'A' complete all as specified and directed.

S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing complete all as specified and directed.

S&F for Framed work such as grills, gratings with ends of bars shouldered and/ or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, including for ornamental and intricate design complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or girth and complete all as specified and directed.

M & L framed work as in doors, door chowkats or gates of angle iron or other section with gusset plate, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supply & fixing Mild Steel works (Miscellaneous) as in hold fasts etc and similar small articles confirming Fe-290 Gde-E-165 complete all as specified & directed.

S & F 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for 12 mm thick Granite (of any type) work (table rubbed and polished) in wall linning, Columns, Pillars, steps and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including dismantling of old complete all as directed by Engr-in-Charge

M&L Coloured / Black Glazed ceramic tiles in vertical surfaces 450x350x7 mm thick, Joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM (1:4) including dismantling of old tiles complete all as specified and directed.

M&L 60 mm thick, interlocking paver block PCC type M-35 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for extra for forming fair finished drain or channle 30cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Material and labour for reinforced concrete pipes, class NP2, 300mm bore with collars, laid and jointed, fixed as in repair complete all as specified and directed (Excavation & earth work and PCC shall be measured and paid for separately) complete all as specified and directed.

Material and labour for rectifying seepage by repairing the nahani traps, floor traps, broken floor and wall tiles, filling the gaps in the tiles, using white cement or other means neccesary to stop/rectify the seepage including replacement of damage/faulty traps with the new traps completely complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coates of white wash complete all as specified and directed.

AR Enterprises

AEGIS INTERNATIONAL

vibha associates

yameen enterprises

H.B. Traders

SHAKTI CONSTRUCTION CO

SANJDHEERA CONSTRUCTION