ELECTRICAL WORK

Amount

(A) Safe loading & carriage including Loading-unloading & proper stacking of following store materials from ESC Tripula to site of work.

S.T. Pole 11 Mtr. Long

11 KV M.S. Top Channel (100x50x6) 2240 mm

11 KV M.S. Dropper Channel (100x50x6) 2240 mm

11 kV Disc Insulator 45 KN

11 kV Disc fitting 45 KN

Earthing Complete

11 kV (3 x 185) sqmm XLPE cable

H.S. Cable jointing kit for 11 KV (3 x 185) sqmm cable Outdoor/Indoor type.

11 KV (3 x 185) sq mm straight through cable Jointing Kit.

11 kV Fuse set

11 KV V type cross arm

H.S. Cable jointing kit for 33 kV (3 x 300) sqmm cable Outdoor/Indoor type

11 KV Pin insulator

11 KV GI pin with nut

T off channel (100 x 50 x 6) 1300 mm

M.S. Angle (65 x 65 x 6) for brassing with 04 clamp

T/F Base angle set

ACSR Dog conductor

33 KV disc insulator B&S type 70 KN

Disc fitting 70 KN

33 KV Stay set (20 X 1800) mm with stay wire, stay clamp, insulator , nut & bolt etc.

11 KV Stay set (16 X 1800) mm with stay wire, stay clamp, insulator , nut & bolt etc.

33 kV (3 x 300) sq mm XLPE cable

33 KV (3 x 300) sq mm straight through cable Jointing Kit.

33 KV M.S. Top Channel (125x65x6) 3200 mm

33 KV M.S. Dropper Channel (125x65x6) 3000 mm

33 KV Pin insulator

33 KV GI pin with nut

LT Cable 4x120 sqmm

F Clamp

11 KV TPMO SET

G.I. wire 8/10/16 SWG

33 kV (3 x 300) sq mm XLPE cable

guarding angle

LT Cable 3.5x70 sqmm

LT Cable 3.5x400 sqmm

(B) Work

Fabrication, erection & painting of S.T. Pole 11 Mtr long of Single pole on ST pole 11 M long with fixing of necessary clamps and other accessories required for erection.

Fabrication, erection & painting of Double pole cable exposure on S.T. Pole 11 Mtr long with fixing of channel , angle pin & pin insulator,D.O set and making bus bar complete work with earthing by earth rod 20x2500 mm for 11 KV Line as per RESSPO drawings.

Grouting & Plinthing of single ST pole as per RESPO Norms (0.268 Cum)

Installation of cable box 11 KV (3 x 185) sq mm Outdoor/Indoor

Installation of cable box 33 KV (3 x 300) sq mm Outdoor/Indoor

Installation of cable box 11 KV straight through (3 x 300) sq mm

Installation of cable box 33 KV straight through (3 x 300)/ (3x400) sq mm

Laying of 11 KV (3 x 185) sq. mm double circuit XLPE Cable in HDPE pipe PN-6, 6" dia by horizontal deep with drilling method (All materials will be suppllied by the contractor at his own cost except XLPE cable.) (Total length of cable =4020x2 (double circuit)=8040 Mtr.)

Laying of 11 KV (3 x 185) sq. mm XLPE Cable by digging of trench 1.2 mtr deep vide as per ISS in HDPE pipe PN-6, 6" dia including providing bricks, sand, stone slab the inter exel spacing bettween to cable shoulde be in between 0.25 m to 0.40 m as required at site as per RESPO Norms.

Stringing & sagging of three phase 11 KV line on ACSR Dog conductor as per RESSPO Norms.

Stringing & sagging of three phase 33 KV line on ACSR Dog conductor as per RESSPO Norms.

Fixing of earth rod (2500 x 20) mm as per norms. For earthing support of old existing poles of LT lines including 6 SWG GI/Earth wire . (All Materials provided by contractor)

Nozeling & grouting of 11 KV stay set complete.(All the civil material will be be provided by Contractor)

Nozeling & grouting of 33 KV stay set complete.(All the civil material will be be provided by department.)

Placement of 11/0.4 KV T/Fs on S/S Type D/P &installation, commissioning of 25 KVA to 100 KVA T/F including cost of L-pieces and lugs jumpering with the system with painting as per RESSPO norms. ( All the required martial for above job shall be provided by contractor except T/Fs)

High Pressure testing of 33 KV & 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

33 KV cable

11 KV cable

Dismantling of 11KV line, L.T. lines & distribution boxes and its dump at suitable place on site up to completion of work and its safe loading/unloading/weighing carriage from dump site to je"s store/ESC Raebareli (Except broken PCC Pole).

ST Pole 11 Mt Long/PCC pole

ACSR mix conductor

Steel scrape

Stringing & sagging of three phase 4 wire LT line on ACSR Dog conductor as per RESSPO Norms.

Laying of 33 KV (3 x 300)sq. mm double circuit XLPE Cable in HDPE pipe PN-6, 6" dia by horizontal deep with drilling method (All materials will be suppllied by the contractor at his own cost except XLPE cable.) (Total length of cable =1600x2 (double circuit)=3200 Mtr.)

Laying of LT Cable (3.5 x 400)sq. mm double circuit XLPE Cable in HDPE pipe PN-6 6" dia by horizontal deep with drilling method (All materials will be suppllied by the contractor at his own cost except XLPE cable.) (Total length of cable =1635x2 (double circuit)=3270 Mtr.)

(C) Following Metarials to be supplied by contractor:-

Nut and bolt off size

PG clamp

Stone Pad

Number Plate

Danger Board with clamp

G.I. barbed wire

Alumineum Binding wire 6 SWG

Aluminium Paint

Red Oxide paint

G.I. Pipe 8 inch

G.I. Pipe 6 inch

Earthwire clamp with Nut and bolt

LT Shackle Insulator

Loop Guard complete 3 Phase

Aluminium Jointing Sleevs for conductor

LT PVC Spacer

LT incomming panel with metering equipment and fixing arrangment

LT Shackle Insulator strip with nut and bolt

X-arm holding clamp/ LT clamp/Top/Dropper/T Off with bolt & nut for STP

HDPE Pipe PN-6, 6" dia. (Purchased from the approved venders of UPPCL)

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER

M/s Sharada Electricals