Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹30.9 L+₹89,154.50 (2.97%)Rejected-AOC SAINIK SOCIETY HITKARINI DENTAL COLLEGE DUMNA ROAD JABALPUR MP 482001 | JABALPUR | JABALPUR | MP | 482001 | L2 | Rejected-AOC IGHER RATE QUOTED THAN L1 | |
| 3 | L3₹31.9 L+₹1.9 L (6.31%)Rejected-AOC VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹33.0 L+₹3.0 L (10.1%)Rejected-AOC | L4 | Rejected-AOC IGHER RATE QUOTED THAN L1 |
Tender Value
₹38.8 L
EMD Value
₹77,700
Closing Date
26 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_620808_1
8500-28/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹77,700
Yes
5 Dec 2023
27 Sept 2023
27 Oct 2023
27 Sept 2023
26 Oct 2023
12 Oct 2023
Amount
Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out soft and loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/sense soilall complete all as specified and directed.
Excavation in trenches 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and depth exc 1.50m but n.exc 3.0m depth and getting out in hard/sense soil complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation all as specified complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed.
M&L for Reinforcement cement concrete (Design Mix) M-25 for using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.
M&L for Reinforcement cement concrete (Design Mix) M-25 for using 20 mm graded aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforcement cement concrete (Design Mix) M-25 for using 20 mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
All as per Item No 08.00 but in chajja complete all as specified and directed..
All as per Item No 08.00 but in slabs supported on walls, beams and columns, in roofs and in shelves and the like complete all as specified and directed.
M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 11.00 but here-in-before 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beam,hauchings, girders, bressum-mers, lintels cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers columns and stainchions for rough finished surfaces complete all as specified and directed.
All as per Item No 15.00 but for chajjas complete all as specified and directed
All as per Item No 15.00 but for sofits of slab complete all as specified and directed
All as per Item No 15.00 but for side of slab exc 10cm but n.exc 20cm thick complete all as specified and directed
M&L for 100 mm thick for cement concrete 1:4:8, Type D-2 (using 40 mm graded stone aggregates) complete all as specified and directed.
Supply and spreading sand in floor of FOL store room complete all as specified and directed.
M&L for steel work in tubular Post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.
M&L for Pre-painted galvatume aluminum zinc coating @150GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L fo two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
S&F 1.00mm thick Mild steel, plain, black sheet but in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.
S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
M&L for 75mm thick PCC type C-1 1:3:6 (using 20 mm gradded stone aggregate) finishing the as in Plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for fly ash old size brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 all as specified complete all as specified and directed. Make : L&T/Lafarge/ACC/Shyam Steel Pvt Ltd
M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete wall surfaces and finishing the surfaces fair and even complete all as specified and directed.
M&L for Rendering 15 mm thick cement plaster in CM (1:4) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying three coats of white washing complete all as specified and directed.
M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for excavating over areas, n.exc 1.5 m deep and getting out in soft loose soil complete all as specified and directed.
M&L 200 mm thick Kankar or laterite, spread, mix of fly ash, clinker and stone dust in proprtion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust) spread, rolled and consolidated to gradient and camber required rolled and consolidated to gradient complete all as specified and directed.
M&L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed..
M&L for Pre-polished Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.
M&L for cement concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping ,lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed.
M&L for moorum filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified & directed
M&L for PCC 1:3:6, D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and directed
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) with old size bricks complete all as specified and directed. Make : L&T/Lafarge/ACC/Shyam Steel Pvt Ltd
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified & directed
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar art set in CM (1:6) complete all as specified and directed.
S&F Reinforced concrete pipes, class NP2, laid and jointed complete with collars 600mm dia complete all as specified and directed.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and exc 1.5m and n.exc 3.0m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius,in half brick walls built in CM (1:4) complete all as specified and directed. Make : L&T/Lafarge/ACC/Shyam Steel Pvt Ltd
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in CM (1:6) complete all as specified & directed.
M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in CM (1:3) complete all as specified & directed.
M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F steel ventilators with centre hung shutter (minimum wt of steel section should be 1.42 M) including two pairs of brasscup pivots, catch spring and pulleywheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.
S&F 100mm long Butt hinges stainlees steel (ISI marked) complete all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed
M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x450x7 mm thick set and jointed in neat cement slurry over and including 10 mm thick 1:3 cement mortar plaster and pointed in coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)
M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors laid over and including 15mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-Charge)
M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed
S&F Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed
S&F Stop valves 15mm dia CP fency type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of complete all as specified and directed.
S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) and including waste pipe complete all as specified and directed.
S&F CP Bib taps 15mm dia, with cfancy handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as specified and directed.
S&F vitreous China squatting pan, 'Orissa patteren' size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cisteren and flush pipe) complete all as specified and directed.
S&F 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make : Parryware/Hindware/Cera
S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed.
S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.
M&L for 125mm dia Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:4) finished even and fair using with water proofing compound complete all as specified and directed.
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height.
M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (WPC Measured and paid seperately) on wall complete all as specified and directed.
Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes for dia 160mm including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.
S&F UPVC Eco Drain pipe drainage sewaer system pipe bearing 160mm dia minimun 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and as directed Note: PCC haunching will be measured and paid seperately
S&F providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item set in CM (1:4) complete all as specified and as directed
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaskey, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge.
M&L for Supplying and laying of CPVC pipes SDR 11 & Plain/Brass CPVC SDR 11 fittings on walls/ceiling or laying in floors including plain/brass threaded fittings complete all as specified and directed.
S &F in repair Vitreous China urinals,full stall type white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe and Waste coupling 32mm dia menimum weight 45 gms complete all as specified and directed
S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.
S&F Glass shelf assembly below WHB fixed SS screws of 450mm long complete all as specified and directed.
M&L for Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.
M&L for 25 Users Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. all as shown in CE's TD Drawings
M&L for soakage well excavation in ordinary soil, foundation in PCC (1:3:6), walls of honey combed masonary with top ring of M-25 Concrete including intercepting chamber ,screen chamber made of brick work in CM, RCC cover slab in M-25/SFRC cover , ,filling with brick bats, complete of size 2.4 m X 3.0 m deep including connection from manhole. complete all as shown in CE's TD Drawings.
E/M PORTION S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top, minimu three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engr-in-Charge Make: Sintex/Vectus/Prayag
Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed. Make: Vectus/Prayag
M&L for 20 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as per specified and directed.
Supply & fix 20 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor, 1100 vlts grade , crsectional area 10 sqmm 2 core complete all as specified and directed (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified complete as specified and directed
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 102.00 above but 5 Amp socket on same board with other switches complete all as specified and directed
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed (For Same Board only)
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F wall LED security light fittings 25 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed. Make : Bajaj/Jaquar/Havells/CG/Philips
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed. Make : Bajaj/Jaquar/Havells/CG/Philips
S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed
S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 2 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed. Make: ABB/L&T/legrand/Hager/Schneider
S&F MCB SPN 6-32 Amps, 'C' series 10 KA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Make: ABB/L&T/legrand/Hager/Schneider
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
S&F metalic body ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed. Make:Usha/havells/CG/Bajaj
S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top, minimu three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engr-in-Charge Make: Sintex/Vectus/Prayag
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed
S&F 25 mm bore GI tubing medium grade in trenches and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F 25 mm bore GI Tubing medium gradeon wall/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F submen two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necesasry chasing, cutting and making good as per existing specification)
S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed. Make : Bajaj/Jaquar/Havells/CG/Philips
S&F LED battem mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed. Make : Bajaj/Jaquar/Havells/CG/Philips
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. Make: ABB/L&T/legrand/Hager/Schneider
S&F single pointed air ternination aluminium rod, 12 mm dia, 300 mm long complete all as specified and directed
S&F GI pipe medium grade 40 mm dia ISI marked duly grounded on the roof for fixing Air terminals including nut, bolts, washers., clamps and suitable arrangement of roof cutting and fixing of GI pipe with water proof treatment complete
S&F aluminium strip 25mm x 3.15 mm complete with saddles and fixing screws, insulators with maximum one metre distance etc for roof conductors and down conductors above ground complete all as specified and directed.
M&L for earthing complete with copper plate electrode 600x600x3.15mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using 20x3mm thick copper strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, copper strip encased in and including 25 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
S&F thermoplastic weather proof empty box (IP 65) with plane wall of size 200 mm x 140mmx95mm, fixed on wall with provision of nut, bolts, washers etc including fixing of test point terminal blcok inside the boxwhich made out of gun metal or phophorous bronze of size 75x75x25m drilled and screwed including 3 Nos 8mm dia 5mm long hesagonal head screw complete all as specified and directed.
SINGH CONSTRUCTION
NATIONAL CONSTRUCTION CO
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .