Emergency Repairs to Escape Weir on Somi Channel @ 8.4 Km on Ramappa Lake Palempet Village Venkatapur Mandal Mulugu District

Excavation for Structures- Mechanical Means (Dataadopted from MORTH) Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technicalspecification, including setting out, construction of shoring and bracing, removal of stumps and otherdeleterious matter, dressing of sides and bottom and backfilling with approved material.Depth upto 3 m

Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than 10 N / sq mm)grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundationfilling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing inposition, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 220 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum,Blending Ratio of CA--50:30:20, FA : 0.40 cum)

Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 280 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum)

Manufacture ,Supply and Delivery of 300 mm dia NP-3 Class R.C.C. Socket and Spigot pipes conforming to B.I.S.458/2003 at ex-factory (rate per meter of effective length) Excluding transportation &taxes.

Laying and jointing 300 mm dia. NP- 3 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ), machinery, labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts.

OT SLUICE Hoist Bridge Gear Hoist Including Platform for below 5 Tons Capacity (Small Gates) As per Guidelines of Chief Engineer, Central Designs Organization, Hyderabad Specification drawing for Krishna Delta System Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of supportingstructure, platform etc. with all accessories for operating canal escape/ regulator gate with allaccessories including cost of all materials, machinery, labour, cutting, bending, aligning, anchoring,welding, finishing etc. complete as per Specification and approved drawing

OT Siuice EM Parts:Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sil beam, slide tracks, seal seats, Guide plates etc. with all accessories including cost of all materials, machinery, labour, etc. complete as per specifications and approved drawings(Excluding wastage of steel @2.5%)

OT Sluice Gate: Fabrication: supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings (Excluding wastage of steel @2.5%)

E.M Parts OF ALL TYPES OF GATES Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and Removing dust. After cleaning, applying primary coat with one coat of Protective Mastic to athickness of 70+5 microns, followed by finishing coats 2 coats with Solvent less Coal tar epoxy each coat with a DFT of 150+5 microns and total DFT of all coats including Primary coat should not be less than 350 microns with material, labour and all accessories with all leads and lifts (in respect of Heavily rusted (30 to 40% rusted) surfaces)

GATES:Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning,applying primary coat with two coats of Zinc chromite red oxide primer, followed by finishing coats 3 coats with synthetic enamel paint with material, labour,and all accessories with all leads and lifts

HOIST& HOIST BRIDGE:Painting of Sluices for Maintenance works: Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning, applying primary coat with two coat of Zinc Chromite Red oxide primer ,followed by finishing coats 2 coats with Solventless Coal tar epoxy with material, labour and all accessories with all leads and lifts