Providing Paver Block at SDA School Opposite road in ward no 78.

Amount

Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply Pipes. The Rate inclusive of all charges such as Earth work and remove the same 2Km away from the site etc, complete as per standard specifications..

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying 80mm thick high strength type conforming IS 15658-2007 of rubberized interlocking paverblock in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry rubbish cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibering the pavers, sweeping tranporting loading unloading of laying paver block as per standard specification

Raising the existing manhole cover with frame 30cm by dismantling the existing cement concrete and tar road surface all-round the manhole, raising the manhole with cement concrete 1:2;4 including centering inside the manhole , laying 15cm the cement concrete etc.,complete

Manufacturing , supply and fixing of Retro-reflecries road name sign board single arow of size made out of wide angle cub corner micro prismatick grade sheeting conforming to IRC 67- 2010 and type XI of standards of ASTM 4956- 09 specification and fixed over 2mm tk aluminium sheet and back support frame by 32Np stainless steel pipe alround and 65Np pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 Grade cement concrete 30cm x 30cm x 45cm etc., complete. the information message shall be made out of cutout letter in blue colour transparent overlay film as per IRC 67:201 guideluines 7 years pre qualification warranty for Retro-reflective sheeting from the original sheeting manufacture and a certified copy of three years out door exposure report from and independent test lab for the product offered shall be submitted by the contractor. The sign board shall be retro reflective type XI, the retro reflective sheeting should have manufacture ward mark on the sheeting surface for identification and the reflective sheeting should be orientation free.etc, complete.(Single Arrow Big Size 36" X 18")

Add GST 18%

parthasarathy (BID ID -1078287)

Thillainatarajan M (BID ID -1078037)

M RAJA (BID ID -1078039)