Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST FOR IN RESPECT OF STEEL FURNITURE PART | |
| 2 | L2₹10.7 L+₹3.8 L (13.8%)Accepted-AOC NEAR TCP DOMAIL WARD NO 2 UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Accepted-AOC BEING LOWEST FOR IN RESPECT OF WOODEN FURNITURE PART | |
| 3 | L3₹33.7 L+₹5.8 L (21.0%)Rejected-AOC SHAKTI NAGAR UDHAMPUR TEH DISTT UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-AOC BEING OTHER THAN LOWEST BIDDER | |
| 4 | L4₹34.8 L+₹7.0 L (25.1%)Rejected-AOC | L4 | Rejected-AOC BEING OTHER THAN LOWEST BIDDER | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-D enlisted by enlisting authority i.e HQ CENC vide letter No. 42590/D-127/152/E8 dated 29 Jul 2022 |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
28 Sept 2022, 6:00 pmClosed
GE(ARMY) DHAR ROAD
GE(ARMY) DHAR ROAD
REPAIR TO STEEL AND WOODEN FURNITURE AND RE CANNING OF CHAIRS AT DHAR ROAD UNDER GE (ARMY) DHAR ROAD
2022_MES_548912_1
8068/NIT-44/2022-23
Open Tender
Miscellaneous Works
Item Rate
240 days
DHAR ROAD
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE(ARMY) DHAR ROAD
₹84,000
Yes
16 Feb 2023
31 Aug 2022
30 Sept 2022
31 Aug 2022
28 Sept 2022
15 Sept 2022
Amount
SCHEDULE 'A' PART-I WOODEN FURNITURE: Taking down worned out/unsv components of the BED PLYTOP WOODEN (FD 246/247) , S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Head rest as shown on drawing
Foot Rest as shown on drawing
Long rail made of Ist class hard wood
Short rail made of Ist class hard wood
Stiffener made of Ist class hard wood
Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw
12mm thick BWR Ply wood top in one piece
WOODEN FURNITURE: Taking down worned out/unsv components of the CHAIR DINING (FD-203/279) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Rear Leg
Front Leg
Side rail with holes for weaving (spacing of holes shall be as per old one)
Front/back rail with holes for weaving (spacing of holes shall be as per old one)
Bottom stiffener
Back stiffener
Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the CHAIR WRITING (FD-261/280) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Rear legs
Front Legs
Side rail with holes for weaving (spacing of holes shall be as per old one)
Front/back rail with holes for weaving (spacing of holes shall be as per old one)
Bottom stiffener
Back stiffener
Arm rest
Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the CHAIR DINING OFFICERS (FD/E6/MAP/10 & FD/E6/MAP/10 (R) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Rear Leg
Front Legs
Side rail of seat frame
Front/back rails of seat frame
Seat made out of 75mm foam cushioned of 40 density covered with fabric as approved by Engr-in-Charge fixed on12mm thick ply
Bottom stiffener
Vertical back stiffener
Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the CHAIR EASY(FD-229) - S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Rear Leg
Front Leg
Side Rail
Front/Back Rail
Back Stiffener
Bottom Stiffner
Arms rest
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of theTEAPOY (FD-278/382) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Long rail
Short rail
Side stiffener
Centre stiffener
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
PVC/Rubber Shoe as per sample approved
Provn of eight Nos of wooden tringular bracket of size 75mm x 75mm to each teapoy made out 30mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
WOODEN FURNITURE: Taking down worned out/unsv components of thePEG TABLE (FD-236/277/384) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Long rail
Short rail
Side stiffener
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the Table writing (FD-275) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Long rail
Short rail
Drawer made out prelaminated MDF board and 6mm thick commercial ply at bottom and fitted with one 100mm chromium plated handle
Bottom centre stiffener
Bottom side stiffener.
Provn of six Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of theTABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Long Rail
Short Rail
Bottom Side stiffener
Bottom Centre stiffener
Drawer made out prelaminated MDF board and 6mm thick commercial ply at bottom and fitted with one 100mm chromium plated handle
Provn of six Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of theTABLE DINING 06 PERSON( FD-239/273) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Long rail
Short rail
Stiffener
Provn of eight Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 40mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of theTABLE DINING 08 PERSON( FD-239/273) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Long rail
Short rail
Stiffener
Provn of eight Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 40mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of theTABLE DRESSING LADIES (FD-251/378/395) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
5mm thick Mirror of size 365mmx1220mm with Back ply of 6mm thick commercial plywood and wooden frame of existing shape & size. Make- Saint Gobin/Gold plus
Sliding glass shutter of 3mm thick as per existing.
Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated MDF board at sides as pre existing shape and siz and fixed with knob as per sample approved
Knob as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the SIDE BOARD (FD-241/371) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Bottom
Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated MDF board at sides as pre existing shape and siz and fixed with knob as per sample approved
Shutter made of 18mm thick prelaminated MDF Board with hinges
Back shall be made of 6mm thick commercial plywood.
Bottom frame with 4 Nos of legs shall be made of Ist class hard wood
Knob as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the TABLE BED SIDE (FD-248 /276) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape
Side made of 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape
Shelf made of 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape
Bottom made of 18/19mm thick both side prelaminated MDF board fixed with PVC edge band tape
Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed
Leg frame with 4 Nos leg and stiffener as per drawing made Ist class hard wood (teak) duly french polished.
WOODEN FURNITURE: Taking down worned out/unsv components of the TABLE CENTRE (FD-274/375) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Long rail
Short rail
Side stiffener
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the TABLE 900mm x 900mm (FD-291) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Long rail
Short rail
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Provn of eight Nos of wooden tringular bracket of size 75mm x 75mm to each Table made out of 35mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the TABLE DRESSING GENTS(FD-230/379) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Looking glass complete with frame and back ply. Make- Saint Gobin/ Gold Plus
Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated MDF board at sides as pre existing shape and siz and fixed with knob as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the Hat Stand with Mirror (FD-FD-233/361/FD-362) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
5mm thick Mirror of size 300mmx440mm . Make- Saint Gobin/ Gold Plus
4mm thick commercial plywood for back
Chromium plated MS pegs with screw as approved by Engineer-in-charge
WOODEN FURNITURE: Taking down worned out/unsv components of theSOFA SET (FD-281/373)S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell duly covered with best quality tapestry cloth as approved by Engineer-in-Charge complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 250/- per RM
WOODEN FURNITURE: Taking down worned out/unsv components of the Chair Dining for (JCO's/OR's) FD/MAP-II/05 S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Rear Leg
Front Leg
Side rail with arrangement for fixing of PVC Sheet
Front/back rail with arrangement for fixing of PVC Sheet
Bottom stiffener
Back stiffener
PVC Sheet of Make : Amko/Cello as approved by Enginner-in-Charge
Provn of four Nos of wooden tringular bracket of size 75mm x 75mm to each chair made out 25mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge
PVC/Rubber Shoe as per sample approved
WOODEN FURNITURE: Taking down worned out/unsv components of the Table BedSide (FD/E-6/MAP/15 (R)) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Back ply of 6mm thick commercial plywood of existing shape & size
Drawers made out of 18 mm thick prelaminated particle board with edging
Chromium plated Handle 100mm long
Telescopic channel of good quality.
WOODEN FURNITURE: Taking down worned out/unsv components of the TABLE DRESSING LADIES INCL STOOL(MAP) (FD/MAP-II/07) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
5mm thick Mirror of size 365mmx1220mm, Make- Saint Gobin/ Gold Plus with Back ply of 6mm thick commercial plywood and wooden frame of existing shape & size.
Sliding glass shutter of 3mm thick as per existing.
Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated MDF board as per existing shape and size with telescopic channel
Foam cushion 75mm, 40 density covered with fabric on seat to be fixed on 12mm thick ply on stool as per existing shape and size
Wheel at the bottom of stool as per existing shape and size
WOODEN FURNITURE: Taking down worned out/unsv components of the TABLE WRITING FOLDING (CE/TD-1139/97) S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top of pre-laminated MDF board 18mm thick ewith 20mm thick teak wood lipping alround. Top of the table should be fitted with 20mm x 20mm size paino type hinges on long rail fixed on wall as per drg
Leg (folding) of size 50mmx30mm of first class teak wood with rubber shoe
Long rail of size 1145mm x 75mm x 40mm of first class teak wood
Tower bolt 75mm long of aluminium fixed on wooden block of size 80mmx 40mmx40mm thick
Chain to hold the table writing, as per drg
Wooden plug of size 40x40x75mm embeded in 100x100x1/2 Bk PCC top long rail of first class teak wood with rubber shoe, as per drg
RE-CANNING OF CHAIRS : Re-canning of wooden chairs, dressing stool, Bin solied linen as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.
Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture items wheather exposed to view or not when placed in position shall be polished with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required.
Bed Plytop wooden - FD 246
Chair Dining FD-228/270/279
Chair Writing FD/261/280
Chair dining officer's FD/E6/MAP/10 (R) & FD/E6/MAP/10
Chair Easy FD-229
Teapoy (FD-278/382)
Peg Table (FD-236/277/384)
Table Writing (FD-275)
Table 900x600mm with drawer and without drawer
Table Dining 6 presons (FD-239/273)
Table Dining 6 presons (FD-239/273)
Side Board (FD-241/371)
Table Centre FD-274/375)
Table 900 x 900mm FD-291
Almirah Mess Utencils (FD-93(M)
Book Case (FD-147)
Chair dinning with long back FD-357)
Hat Stand with Mirror (FD-FD-233/361/FD-362)
Sofa Set 4 Seater (FD-281/373)
Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02)
Sofa Set Single Seater (FD-281/373)
Stool Dressing CB (FD-282/374)
Chair dining for (JCO's/OR's) FD/MAP-II/05
Table wrting folding (CE/TD-1139/97)
SCHEDULE 'A' PART-II STEEL FURNITURE : Taking down worned out/unsv components of the ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) /Almirah Small/ Medium steel (FD-350 /1032/243)/ Locker Bedside Steel ( FD-257/1029) , S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Shutter (Single Leaf) for Almirah Large Steel made of 1.6 mm thick MS sheet and shall be applied a coat of red oxide primer on both side after preparation surfaces
All as per Item 26.01 here-in-before but for Almirah Small/medium steel
All as per Item 26.01 here-in-before but for Locker Bedside Steel
Shelves made of 1.25 mm thick MS sheet and shall be applied a coat of red oxide primer on both side after preparation surfaces
All as per Item 26.04 here-in-before but for Almirah Small/medium steel
All as per Item 26.04 here-in-before but for Locker Bedside Steel
Six Levers brass lock for Almirah Large Steel/Almirah small/Med Steel Make : Godrej/Harrison/Link with duplicate keys
Three way Locking Device for Almirah Large Steel of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer
All as per Item 26.08 here-in-before but for Almirah Small/medium steel
Chromium plated Steel Handle 125mm for Almirah Large Steel/Almirah small/Med
Chromium plated MS Key plate fixed with screw and nuts for Almirah Large Steel/Almirah small/Med
Chromium plated 125mm Steel Handle 'D' type for Locker Bedside steel
Leg for Almirah Large Steel/Almirah small/Med Steel made of 1.6 mm thick MS sheet with Gas welding incl a coat of red oxide primer
All as per Item 26.13 here-in-before but 1.0 mm thick MS sheet for Locker Bedside Steel
75mm Chromium plated haps & stapple fixed with rivets of locker steel
Hanging Rod for Locker bed side steeel of 1.6mm thick chromium plated MS Rod
STEEL FURNITURE : Taking down worned out/unsv components of the TABLE DINING OR's ( FD-165(M) )S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.
Top of 18/19 mm thick block board of size 1900 mm x 685 mm covered with aluminium sheet 22 guage on top complete all as specified , as directed and shown on drawing.
Rubber shoe to legs
STEEL FURNITURE : Taking down worned out/unsv components of the CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) ))S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Seat frame of Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality as shown in drawing
All as per item No 28.01 here-in-before but back frame
All as per item No 28.01 here-in-before but Seat frame for Chair CB Steel without Arms
All as per item No 28.01 here-in-before but back frame
Arms rest for Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish
PVC cap at top of the frame of the chair (02 Nos to each chair)
PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair)
STEEL FURNITURE : Taking down worned out/unsv components of the TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Drawer made of 22 gauge MS sheet with a coat of red oxide primer
Six levers Lock of Godrej/Harrison with duplicate keys.
Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.
PVC Shoe at bottom of the leg of the Table
STEEL FURNITURE : Taking down worned out/unsv components of the TABLE OFFICE OFFICER STEEL (FD-84(M)/1003) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Drawer made of 22 gauge MS sheet with a coat of red oxide primer
Six levers Lock of Godrej/Harrison with duplicate keys.
Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.
PVC Shoe at bottom of the leg of the Table
STEEL FURNITURE : Taking down worned out/unsv components of theTABLE 3' x 2' STEEL WITH DRAWER ( FD-283/1008)/Table for Hav & OR Steel (FD-223/1007) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.
Drawer made of 22 gauge MS sheet with a coat of red oxide primer
PVC Shoe at bottom of the leg of the Table
STEEL FURNITURE : Taking down worned out/unsv components of the TABLE 3' x 3' STEEL (FD-291/1009) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.
Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.
PVC Shoe at bottom of the leg of the Table
STEEL FURNITURE : Taking down worned out/unsv components of the CHARPOY IP WITH PLYTOP (FD/MAP-II/01) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) with MS nuts & screws.
PVC Shoe at bottom of the leg of the Charpoy
STEEL FURNITURE : Taking down worned out/unsv components of the Charpoy GI Pipe with Plytop: (FD-220) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams
Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams
Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed
Short rail converted out of retrieved Long rail, Item No 34.03 above incl cutting, threading as required and directed
Leg converted out of retrieved Short rail, Item No 24.04 above incl cutting, threading as required and and directed
Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail
12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece).
STEEL FURNITURE : Taking down worned out/unsv components of the FOAM WITH OUT BACK (FD-77(M) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Removal of old U/s plank of form with out back and S&F new plank of form without back of size 1525mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) and all steel / iron surface shall be painted with two coats of black enamel paint over two coat of primer complete all as specified and directed by Engr -in charge.
Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long piece will be counted as one.
STEEL FURNITURE : Taking down worned out/unsv components of the BENCH WORKSHOP STEEL( FD-1024)) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
40mm thick top made out of 2nd class hard wood with three coats of oil paints complete all as specified and directed.
Drawer made of 1 mm thich MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified
Cutting down wornout portion of MS Tube of the steel frame(each upto300mm will be caounted as one) and replace with 32 x 32 mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified.
PVC shoes at the bottom of leg.
STEEL FURNITURE : Taking down worned out/unsv components of the CHAIR WRITING MAP (FD/E6/MAP/12)S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Replacement of exising tapestry of seat frame with new tapestry cloth of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 200/ RM.
All as per item No 37.01 above but for back frame
Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified
Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, complete all as specified
Rubber stopper at the bottom of leg.
STEEL FURNITURE : Taking down worned out/unsv components of the CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Hand board of 18 mm pre-laminated MDF board exterior grade with 2mm PVC edging & screwed at right hand side of chair arm fixed to frame as shown on drawing.
Seat & back in one piece made of PVC and fixed with frame
PVC shoe at bottom of the leg
STEEL FURNITURE : Taking down worned out/unsv components of the BED HARD STEEL( FD/E6/MAP/08(R)) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete all as specified
18mm thick prelaminated particle board at head side of the bed as specified
18mm thick prelaminated particle board at foot side of the bed as specified
PVC shoes at the bottom of leg.
STEEL FURNITURE : Taking down worned out/unsv components of the CHAIR COMPUTER (FD/E6/MAP/01) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with tapestry cloth as approved along with PVC liping all round, complete all as specified
All as per item No 40.01 here-in-before but for back frame
Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified
Pedestal assembly complete
Twin wheel coasters press fitted at the bottom of leg.
STEEL FURNITURE : Taking down worned out/unsv components of the TABLE COMPUTER (FD/E6/MAP/03)S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Top of 18mm thick pre-laminated MDF board incl PVC lipping all around the top
Drawer of 18 mm thick pre-laminated MDF board fixed with telescopic channel
Shelf for keyboard of 18 mm thick pre-laminated MDF board fixed with telescopic channel .
PVC shoes at the bottom of leg.
STEEL FURNITURE : Taking down worned out/unsv components of the RACK SHOE STEEL (FD/E6/MAP/02®)S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
MS Pipe of 25mm dia for leg frame by welding
MS Jali as shown on drawing
STEEL FURNITURE : Taking down worned out/unsv components of the Chair Verandah (FD-256, 259, 359) S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge
Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge
PVC/Rubber shoes as per sample approved
SCHEDULE 'A' PART-II STEEL FURNITURE : Painting of the following furniture items with two coat of synthetic enamel paint (colour as approved and directed by Engineer-in-Charge) after preparation of surfaces :-
Almirah Steel Large with Shelves, FD-351/1031
Almirah Small/medium steel (FD-350 /1032/243)
Locker Bedside Steel ( FD-257/1029)
Table Dining OR (FD-165(M)
Chair CB steel with arms/ without arms ( FD-75(M) )
Table office ckerk steel (FD-84(M)/1004)
Table for Hav & OR Steel (FD-223/1007)
Table (900x600x760)mm steel with drawer (FD-283/1008
Table 3'x3' steel (FD-291/1009)
Table officer officer steel (FD-84(M)/FD-1003)
Almirah Glazed Steel (Large) (FD-104)
Almirah Steel Large with 1/2 hanging 1/2 shelves with side mirror (FD-114(M)
Book Shelf open steel large (FD-69(M)
Book Shelf open steel Small (FD-69(M)
Charpoy IP with plytop (FD/MAP-II/01)
Form wihout back steel(FD-77/1027)
Rack (1830x760x900)mm (FD-129(M)
Rack adjustable (FD-106(M)
Rack steel 6 tier FD-345/FD-1038
Rack side steel with tray, FD-97/1023
Bench wksp steel (FD-1024)
Chair writing MAP(FD/E6/MAP/12
Chair School with hard board FD/E6/MAP/05
Bed Hard FD/E6/MAP/08®
Table computer FD/E6/MAP/03
Rack Shoe steel FD/E6/MAP/02®
TULSI RAINA AND SONS
VEE KAY IND
M/S SACHKHAND ROAD SERVICE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .