SVG-Construction of Anganwadi building at Keelavalavu Village in Madhagupatti Panchayat.

Amount

Name of the work: Construction of Anganwadi building at Keelavalavu Village in Madhagupatti Panchayat.

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,

Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard speecifications

Cement concrete 1:4:8 mix usin 40 mm HBG metal inculding cost and coveyance of all materials to site including labour for mixing laying,curing etc complete.

Brickwork in Cement mortar 1 : 5 mix using new II class bricks including cost and conveyance of all materials to site and labour charges etc complete.

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal (using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum

Supplying&fabrication of steel including all labor charges etc complete

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

For Below GL Centering

For Above GL Centering

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Plastering with Cement Morter 1:3 mix 10 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with Cement mortor 1:4 -20mm thick plastering including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by we

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm

Fabrication and supply of mild steel Door including all labour charges etc complete.

Door 0.90 x 2.10 m

Door 0.75 x 2.10 m

Door 1.10 x 2.10 m

Fabrication and supply of mild steel Window including all labour charges etc complete.

window 1.20 x 1.30 m

ventilator 0.90 x 0.45 m

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Exterior emulsion paint two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall )

Painting with Enamel paint two coat of new iron works such as steel Doors ,windows ,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Supplying and fixing P.V.C rainwater down fall pipe of 110m dia with necessary shoes, bends,& clamps etc.,

Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualitiy (Using M-sand)

European water closet with all fittings and 10 lit capacity flushing tank

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only (SD 144)

Supply and run of 2 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 66)

Supply and run of 2x1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in 25mm dia GI pipe (class B) suitably bent at both ends with necessary angle iron upright and end supports for Mains (SD 67)

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 80

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit(500V) 32 A neutral link and earth link on TW plank of size 375mmx300x13mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse Unit (SD125)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300mm down rod on the existing clamp. (SD No. 110) ( ISI std company)

Supply and delivery and fixing of 500 ltr HDPE tankas per IS 12701 / 1996 including loading,unloading, transportation and labourcharges for fixing of the GI pipes andspecials for pipe connection works includingcutting, threading and fixing charges etc.,

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B'Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc White with Pedastal

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

KANNAKI K