Construction of toilet block Children Park at Sanjauli ward No 18 Engineghar

Amount

Demolition of brick work below G.L. upto 1.5Metres depth including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead. In cement mortar

P/L P.V.C. Pipe 75mm dia (heavy duty)

P/F P.V.C. Floor trap 75mm dia (heavy duty)

P/L P.V.C. Pipe 100mm dia (heavy duty)

P/F 75mm dia P.V.C. Bend (heavy duty)

P/F 100mm dia P.V.C. Bend (heavy duty)

Providing and fixing 100mm size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement: 1 sand) – sand cast iron

P/L G.I. Pipe 15mm dia normal for approval quality (heavy duty)

P/F G.I. Nipple 15mm dia (heavy duty)

P/F G.I. Union 15mm dia (heavy duty)

P/F C.P. Brass stop cock 15mm dia (heavy duty)

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan)size 580mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately) – Orrissa pattern

Providing and fixing Cera make 8 to 10 liters P.V.C low level flushing cistern with a pair of C.I or mild steel brackets complete with fitting in all respect.

Providing and fixing viterous china basion with single hole for pillar tap with C.I or M.S brackets pained white including cutting holes and making good the same but excluding fittings:- a) Flat back :- i) 550mmx400mm

P/F M.S. Zet for approved quality with accessories)

P/F C.P. Brass Angle cock 15mm dia for approved quality

P/F C.P. Brass Bib Cock 15mm dia for approved quality

P/F C.P. Connection pipe 15mm dia 45cm long

Providing and fixing 600mmx450mm bevelled edge miror of superior glassmounted on 6mm thick A.C sheet or plywood sheet and fixed to woooden plugs with C.P brass screws and washers

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete)

Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete. 1st class Indian teak wood.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 9mm thick

Providing and fixing aluminum handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete 125mm

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position. 2nd class deodar wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. Second class teak wood 35 mm thick shutters

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock

Stone soling properly hand packed filling interstices with kharanja stone and consolidating with power road roller to the required gradient and comber including spreading, watering and rolling of binding materials moorum or earth etc. complete as per HPPWD specification. 100mm spread thickness (finished work including materials and labour)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars

CHANDRESH SHARMA

Devender Gupta