Under District Pratapgarh, Construction of Residential and Non Residential Building at Block Sadar , Lot No 1

CONST. OF Type-2 (06 Nos)

Cleaning Jungle a including uprooting of rank vegetations grass, dush, wood tress and saplings of girth upto 30cm, measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres out side the periphery of area cleared. S.I. No. 259 (Analysis)

Excavation in Foundation in Ordinary soil i/c 1.5m lift and 30m lead etc required for proper completion of Work. SI No. 251 (R/S By S.E. PRJ)

Providing & injecting chemical emulsion for Preconstructional antitermite treatment. Required for proper completion of work. S.I. No. 361 SOR (2015)

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, dressing etc. rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. SI. No 255 (Analysis)

Cement Concrete with 4cm. Gauge approved stone ballast coarse sand 2.5FM & Cement in 8:4:1 including supply of all materials, labour, Tools and plants etc required for proper completion of the work. SI. No.281

Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. PWD-303 SI No.303 (Analysis)

Class M-150 brick work in 1:4 cement coarse sand (of 2.25 fineness modulus) mortar in foundation including supply of all materials, labour, tools and plants etc. required for proper completion of the work. PWD-305 (Analysis)

12 mm thick Plaster with 1:4 Cement : F-Sand mortar Up to plinth. SI.No. 584 )

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lintel Door, window & sunshade excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-283A

Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall 230mm thick to (1:6 cement & coarse sand). PWD 303+309+ 310 (Analysis)

Brick work in super-structure with half brick thick wall in 1:4 cement & coarse sand mortar including necessary cutting in all complete. PWD 305+309+ 310A (Analysis)

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-284

Cast cement concrete door sills, chaukhats, boundry posts, shelves and similar small work with cement, approved coarse sand 2.5 F.M. and 2 cm. Gauge stone grit in proportions of 1:2:4 excluding cost a rainforcement & its bending but including its fixing and binding the same with 24 B.W.G.G.I. fixing Binding wire and including the cost of binding wire, moulds, all other materials, labour, T&P etc required for proper completion of the work including cost of binding wire. SI.No.282

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lighter Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-285

HYSD Steel or Iron in plain work such as RCC or R.B. work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel & wastage and over lapping and hooks. SI.No 504

S/F of Fan hook(box type) in ceiling i/c all .

12 mm thick Plaster with 1:6 C : fine sand (FM 1.25) mortar at plain surface not to be less than 1 cm. including supply of materials, labour, T&P etc complete. SI.No.586

12 mm thick Plaster with 1:6 C : fine sand (FM 1.25) mortar at Rough surface. not to be less than 1 cm. including supply of materials, labour, T&P etc complete. SI.No.586

Providing Appling white cement base Putty of Average thickness 1 mm of App. Brand over plastered Surface to prepare the Surface & smooth Complete DSR 13.8

2 cm (3/4) thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of coarse sand laid in pannels, finished with 3mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5:1 including materials, labour tools and plants etc. required for proper completion of the work. PWD 597 (S.O.R.-2020)

Providing & Laying 8 to 10 mm thick ivory or light shade Vitrified tiles 600x600 mm size in flooring or skirting laid with 1:3 C:C-Sand mortar finishing with cement Slurry with pigment. S.No.14.07 (S.O.R.-2020)

2.5cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand of 2.5 FM and 2cm graded approved stone grit without base concrete with neat cement. .SI.No. 601b (Analysis)

S/F of Kota stone in flooring 20 mm thick and joint filled with 1:2 C:C-sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:2 Cement and coarse sand mortar and polished by hand or machine and family finished with french manson polish or other approved polish including supply of all materials, labour T&P etc required for proper completion of the work excluding base concrete. S.No.14.05 (S.O.R.-2020)

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (PWD 649+651)

Painting or varnishing on iron works in small areas or new wood work three coats over one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour tools and plants etc. required for proper completion of the work. PWD 641+642

HYSD Steel or iron work in heavy sizes such as Trusses, built up gates, door, frame, record racks, roof work, Gates etc. wrounght to required form including drilling hole, rivetting or welding where necessary and also including supply of steel bolts, nuts etc. and their fixing required for proper completion of the work. SI No 503

Supply and fixing of C.P. teak decorative type (one side only) and commercial lipping approved plywood flush sutters 4cm (1½") thick S.I. No. 477 (S.O.R.-2015)

S/F of Pan Glass of 2.8 to 3.7 mm thick ISI Mark including putti and Brads, and including supply of materials labour and toos and plants etc for sprigs in Z-Section window.SI 812(a)

Fixing of Door/Window frame in position i/c all.

ii - Ventilator

E/W filling in embankment in Ordinary soil i/c all Completion of Work but five Km cartage extra. SI.No.253 (Analysis)

Cement concrete in 1:2:4 cement, C-sand & 20mm gauge stone grit i/c all complete As per S.I. No. 279(a)

12mm thick plaster 1:3 with cement and coarse sand mortar with neat coat cement, including all complete. S.I. No. 583

Providing and laying flamed finish Granite Stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawing with 18 mm thick stone slab over 20mm (average

Brick Bats filling 40mm dia including all complete.

) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and poilishing etc all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red Elite Brown Cat Ever

Providing and laying “Brick Coba” 12mm thick laid with M-150 class brick bal coba 7.50 cm thick with gap of 15mm tho each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofinging compound spreading cement slurry mixed with aereic cement concrete water fromming compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false squqre 30cm x30 cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight. (Analysis)

CONST. OF Type-2 (06 Nos) Electrict Work

Wiring point for light with 1.5 sq. mm FRLSH PVC inslulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose/ angle/batten holder on 3mm thick phenolic laminated backelight sheet etc., complete in all respect, as directed including matching colour wash.

(a) Light point (131 c & 187A) (643+44=687)

(b)Fan/fresh air point (133 c & 187A)

(C)6A plug (134 c & 187C)

S & F surface/Flush mounting 6 ways TPN distribuition board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. (1027A,Cat A)

S/F of 6A to 32Amp MCB, CatA(1002,CatA)

S/F of 63A 4 Pole Isolator. (1007B,CatA)

Supply and burring of safe earthing Electrode T-39 (Hot-Dip Galavanized), length up to 3000m, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm, outer GI pipe of 16 SWG and inner pipe of 12 SWG with hot Dip Galvanization up to 100 micrin filled crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25x3 Gl. Strip will be extra) 728D)

Supply and laying of 32mm x 6mm G.I. strip from earth electrod directly in the ground as required complete in all respect. (717)

Supply & fixing of submain with two number 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcement before concreting and partley concealed in wall, with one no. 14 SWG copper earth continuity wir etc. complete in all respects including matching colour wash.

(a) 1.5 sq.mm.*2nos(1313c)

(b) 2.5 sq.mm.*2nos(216c)

(c) 4.0 sq.mm.*2nos(216B)

E/Testing of ceiling fan with regulator and up to room height making connection complete in all respect (1116)

E/Testing of exaust fan with making connection on the existing hole complete in all respect (1120)

S/F of LED Tube light with batten fitting suitable for up to 1*22 watt LED tube light complete with tube on surface complete in all respect. (1413, CAT AAA)

Construction and recess of 600mm x 480mm x 200mm size of main boards, distribution boards of all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all materials labour T&P required for proper completion of work. (1141b)

S/f of electronic fan regulator (modular) 120-280 volt ISI marked on the existing board including making connection complete in all respect (1203c)

S/f of 16 SWG MS drum with luvers duly painted including making hole in the wall for exhaust fan and proper finishing complete in all respect (1122A)

S/F of power plug with 20Amp/ 250 Volt flush type modular switch and 5 pin 20A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all materials, labour T&P etc, required for proper completion of work. (1139A)

S/F of Call Bell point complete in all respect (187 E)

CONST. OF Nali

Earth work in excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50m & lead upto 30m. Including all complete. S.I. No. 251

Cement Concrete with stone ballast, coarse sand of 2.5 F.M. and cement in proprtion of 8:4:1 in foundations and under floors including supply of all materials, labour, tools & plants etc. required for proper completion of the work. S.I. No. 281

Class 150 brick work in 1:6 cement & coarse sand of 2.5 fineness modulous mortar in foundation i/c all complete. (Analysis)

12m.m. thick plaster with 1:4 Cement & F-sand of 2.5 fineness modules mortar including supply of materials, labour, T&P etc complete. S.I. No. 584

R.C.C. work with cement approved coarse sand of 2.5 F.M. and 2 cm. (3/4") Gauge approved stone grit in propotition of 1:1.5:3 in foundation its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work including of biding wire. S.I. No. 283(a)

M.S. (for steel or plain) in Plain work such as RCC work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. S.I. No. 504

Const. of Interlocking

Earth work in excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50m & lead upto 30m. Including all complete. S.I. No. 251

Eearth work in excavation in foundation in ordinary soil inclunding with all complete. Including royalty as per S.I. No. 251

Brick work in 1:4 cement & Coarse coarse sand mortar including all complete. S.I. No. 305 (Analysis)

Construction of granular sub-base by providing well graded Material, Spreeding in Uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Analysis)

Providing, laying, spreading and compcting stone aggregates of 53-22.4mm size to water bound macadam G-3 specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required denisity Grading 3 as per Technical Clause 405 (3) A (Analysis)

Providing & Laying of Rubber Moulded Zig-Zag 80mm thick Tiles Pavour compressed C.C. Passing 30mpa compressive strength ISI marked concrete block pavements having thickness 80mm as per technical specification clause-1504 (Analysis)

Cement concrete in 1:2:4 cement, C-sand & 20mm gauge stone grit i/c all complete as the top of wall. S.I. No. 279(a)

CONST. OF Nali

Earth work in excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50m & lead upto 30m. Including all complete. S.I. No. 251

Const. of Boundry Wall

Class 150 brick work in 1:6 cement & coarse sand of 2.5 fineness modulous mortar in super structure of one brick thick wall including supply of all materials, labour & tools & plants etc. required for proper completion of the work. S.I. No. 303, 309, 310 (Analysis)

R.C.C. work with cement approved coarse sand of 2.5 F.M. and 2 cm. (3/4") Gauge approved stone grit in propotition of 1:1.5:3 in foundation its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work including of biding wire. S.I. No. 283(a)

R.C.C. work with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in column excluding su

pply of reinforcement and its binding but B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T & P etc.required for proper completion of the work. Binding wire cost being included in the item M-20 S.I No. 284

12m.m. thick plaster with 1:6 Cement & F-sand of 1.25 fineness modules mortar including supply of materials, labour, T&P etc complete. S.I. No. 586

Finishing wall with Acrylic Smooth exterior paint of required shade new work (Two or more coat applied @ 1.67 ltr/10sqm over and including priming coat of exterior primer applied @2.20 kg/10sqm) DSR-13.46.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (DSR-13.80)

Extra Item Estimet CONST. OF Boundry Wall

Earth Work required for filling

E/W filling in embankment in Ordinary soil i/c all 1.5 m lead and 30 m lead etc Completion of Work but five Km cartage extra. SI.No.253 (Analysis)

CONST. OF 20 KL O.H.T. OF 15.0 M. STAGING

Excavation in Foundation in Ordinary soil i/c 1.5m lift and 30m lead etc requard for proper completion of Work. SI No. 251

C.C.Work in foundation (1:4:8) with Cement :C-Sand : 4Cm stone ballast i/c all L+M etc.SI. No.281

R.C.C. Work with Cement : C-Sand : 20mm Stone grit in proportion of 1 :1.5 : 3 in Slab. As per SI.No.284(a) For Stair

From + 0 LVL To + 3750 LVL

From + 3750 LVL To + 7500 LVL

From + 7500 LVL To +11250 LVL

From + 11250 LVL To +15000 LVL

From + 15000 LVL To +18500 LVL

R.C.C. Work with Cement : C-Sand : 20mm Stone grit in proportion of 1 :1.5 : 3 in L.Beam. As per SI.No.285

From + 0 LVL To +3750 LVL

From + 3750 LVL To +7500 LVL

From + 7500 LVL To + 11250 LVL

From + 11250 LVL To + 15000 LVL

From +15000 LVL To + 18500 LVL

R.C.C. Work with Cement : C-Sand : 20mm Stone grit in proportion of 1 :1.5 : 3 (Mix concrete) in Raft foundation and footing with approved stone grit . As per SI.No.287A (Analysis)

R.C.C. Work with Cement : C-Sand : 20mm Stone grit in proportion of 1 :1.5 : 3 (Mix concrete) in Column with approved stone grit . As per SI.No.289

Up to + 3750 LVL

From + 3750 LVL To 7500 LVL

From + 7500 LVL To 11250 LVL

From + 11250 LVL To 15000 LVL

M.S.Iron work in RCC i/c all its cutting bending in reqd shape & sizes. SI.No 504

From + 0 LVL To 7500 LVL

From +7500 LVL To 11250 LVL

From +11250 LVL To 15000 LVL

From +15000 LVL To 18500 LVL

S/F M. S. work in Gate including all necessary for proper completion of the work. S.I. No. 503

Earth work in excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50m & lead upto 30m. Including all complete. S.I. No. 251

Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. PWD-303 SI No.303 (Analysis)

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lintel Door, window & sunshade excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-283A

Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall 230mm thick to (1:6 cement & coarse sand). PWD 303+309+ 310 (Analysis)

Brick work in super-structure with half brick thick wall in 1:4 cement & coarse sand mortar including necessary cutting in all complete. PWD 305+309+ 310A (Analysis)

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-284

HYSD Steel or Iron in plain work such as RCC or R.B. work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel & wastage and over lapping and hooks. SI.No 504

HYSD Steel or iron work in heavy sizes such as Trusses, built up gates, door, frame, record racks, roof work, Gates etc. wrounght to required form including drilling hole, rivetting or welding where necessary and also including supply of steel bolts, nuts etc. and their fixing required for proper completion of the work. SI No 503

Enamel painting two coat over one ready mixed primer coat SI.No. 641+ 642

Excavation in Foundation in Ordinary soil i/c 1.5 m lift & 30 m lead i/c filling, watering and ramming of excavated earth into trenches etc all Completion of Work As per direction of E/I . SI. No. 251

12 mm thick Plaster with 1:3 C :Coarse sand (FM2.25) mortar including supply all materials, labour, Tools and plants etc complete. SI.No. 583

12 mm thick Plaster with 1:6 F : coarse sand (FM 1.25) mortar at plain surface not to be less than 1 cm. including supply of materials, labour, T&P etc complete. SI.No.586

Fixing of Door / Window frame in position including all. I - 1.5 to 3.00 D+W

2.5cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand of 2.5 FM and 2cm graded approved stone grit without base concrete with neat cement. .SI.No. 601b (Analysis)

Providing & Laying 8 to 10 mm thick ivory or light shade Vitrified tiles 600x600 mm size in flooring or skirting laid with 1:3 C:C-Sand mortar finishing with cement Slurry with pigment. S.No.14.07 (S.O.R.-2020)

Supply and fixing of C.P. teak decorative type (one side only) and commercial lipping approved plywood flush sutters 4cm (1½") thick S.I. No. 477 (S.O.R.-2015)

Painting or varnishing on iron works in small areas or new wood work three coats over one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour tools and plants etc. required for proper completion of the work. PWD 641+642

ii - Ventilator

E/W filling in embankment in Ordinary soil i/c all Completion of Work but five Km cartage extra. SI.No.253 (Analysis)

Providing and Fixing white china water closet Orissa pattern W.C. Pan. Weaper size 580mm with 10 mm sand cost with low level flushing systern with fitting. Item No 301d (2040+215=2255) Ch. 2 S.No. 2

Providing and Fixing white vitreous china flat back wall corner type lipped front urinal seats of 465x355x265mm size with 10 ltr white automatic flushing cistern with std. flush pipe & cp brass spreaders ,brass unions GI clamps complete. Ch.2 S.No. 12

Providing and Fixing Squilting type urinal seats of standard size. For Ladies Ch. 2 S.No. 13

P/F of White glazed victrious china Hand Wash basin 550x450 mm with R.S. C.P. brass fitter tap and C.P. brass china plug 32 mm dia M.I.or C.P. brass waste standard pattern 32 mm dia .i/c cutting &macking all complete SI. No.306

P/F flexible P.V.C.waste pipe for sink or wash basin i/c PVC waste fittings complete. 32 mm dia. Ch. 1 S.No. 82

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm dia nominal bore. SOR 2018 Ch-1 Sno 53

P/F of 20 mm B.G.I.Union complete in all respect. S.N.57

P/F 15 mm Ø brass bib Cock 400 gm complete in all respect. S.No. 44

P/F of 15 mm brass. Stop Cock complete in all respect. S.N. 45