Construction of Bus Stop at Near Vadakadu Mukkam in Alangudi Town Panchayat.

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Filling the Basement with Filling M.Sand in layer of more than 15cm well rammed and consolidated complete complying with standard specifications.

Plain Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and filling Gravel with a lead of 8KM in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc., complete.

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Below GL Brick Work

Above GL Brick Work

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Supplying and Erecting Centering and Shuttering including necessary supports for plane surfaces in foundation and in all floors for Column, footing, plinth beam, lintel beam, stair case step etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props of 10cm to 13cm diameter spaced at suitable intervals etc., complete complying with standard specification and as directed.

Below GL Footing, Grade Beam

Above GL Column, Roof Beam & Slab, Sunshade

Cement Concrete M20 Grade (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Below GL Footing, Grade Beam, Column

Above GL Column, Roof Beam & Slab, Sunshade

Supplying, fabricating and placing in position HYSD Steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specification.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying and fabricating and fixing MS grill works to windows and grill gate using necessary MS flst for inner and outer members should be fixed to window frames

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Above GL Column, Grade Beam, Roof Slab & Sunshade

Plastering with cement mortar 1:5 (one cement and five crushed stone sand)12mm thick in all floors complying with standard specifications.

Painting two coats of newly plastered wall surface with ready plastic emulsion paint of first class quality and of approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plater of paris putty, wherever required etc., complete complying with standard specification

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 83mm thick (table clauses 5 and 9.14) suitable for bus terminals ,industrial complexes, road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 83mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of M- Sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the M- Sand to paver block etc., complete ISI 15658-2006

Supply & Fixing of LED mirror light - 11 W warm white 2700K - 3000 K - , Led efficasy - > 100 lumes/watt with inbuilt driver input voltage range 145-265 V AC PF > 0.9 , base body extruted aluminium with polycarnote milky diffuser (ELMR09) @ Mirror (Page No 70) item 25 Market Rate

Supplying,Erecting,connecting of wires, testing and commissioning of Bright Lyts Decor Crystal Chnadlier Jhoomal ceiling hanging pendent large size (480mm / 45cm ) e26/e27 screw type llamp including of lamp Fitted on to ceiling / wall as per site including providing necessary bulbs etc including necessary connecting wires fixing hardware etc. All complete & required.

Supply and Fixing of LED hibay light - 30 W cool white 5700K - 6500 K - , Led efficasy - > 100 lumes/watt with inbuilt driver input voltage range 145-265 V AC PF > 0.9 thd < 10 % , body made of aluminium and suitable for suspended mounting

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator and 300mm down rod on the exising clamp .-SD106

Supply and fixing of triple pole and neutral 8 way7 segments MCB distribution board complete with the following and necessary neutral link, earth connector link etc. with bus bar and double door arrangements on surface / in flush with wall and making good of the concealed portion with earth connection Incoming: 1 No. 63A 10KA 4 pole MCB -1 NO. 3 nos of 40A/30mA DP RCCB Outgoing: 24 Nos. 6/10A 10KA SP MCB FOR LDB

Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.