Installation of Spot Drinking Water solar submershible pump with overhead tank with platform and soakpit at Kuara Dharmarajtala ICDS centre sansad xi Copde110505035

Labour for boring tube wel of required dia by water jet system through any type of soil strata ncluding hiere & labour charge for boring pipes scaffolding ,.tools and plants necessary & takuing out them and lowering pipes ,striners blind pipe etc.and fitting & fixxing the same complite including back washing and other incidential work in thes connection . Tube well should have minimum 50 mm gap in between the outside of the well pipe and bore .a) For depth upto 150 m (ii) 80mm dia..

Suppling , fitting and fixxing steel cutter pipe upto 450 mm long with sockets.(a)50 mm dia.

P.V.C. reducing socket of I.S.I. marked including all necessary jointing materials supplied .fitting and fixing complete of 80mm X 50mm dia.

Suppling High density polythene Strainer of approved quality 50 mm dia.

Housing clamp of M.S. plate of 25 mm width and 20mm thik. With arms extended on both side upto 0.30 m length (each side ) with two drilled holes on both side for insention of total 4 nos M.S. nuts & bolt of 75X20 mm dia size with M.S. washer etc complete (a) 80 mm dia.

Housing clamp of M.S. plate of 25 mm width and 20mm thik. With arms extended on both side upto 0.30 m length (each side ) with two drilled holes on both side for insention of total 4 nos M.S. nuts & bolt of 75X20 mm dia size with M.S. washer etc complete (a) 80 mm dia. (b) M.S. clamp size 32 mm dia.

Suppling of P.V.C. pipe conforming to ASTMD -1785 and thereded to match with G.I. pipe as per IS 1239 (part-1) (i) i) 80 mm dia PVC Pipe(sc-40)

Suppling fitting & fixing GI medium pipe ISI mark a) 80 mm dia (ii) 32 mm dia

Suppling fitting & fixing GI medium pipe ISI mark a) 80 mm dia (ii) 32 mm dia

Suppling & instaletion of 1 H.P. Submersible Pump of approved make (Ksb,Kalama,Kiloskar etc)

Suppling fitting & fixing submersible cable as per direction of IEC

Suppling & instaletion of starter for submersible pump with panel board of approved make.

Suppling Fitting fixing Tube well cap CI make 80 mm dia.

Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer b) 1000 litre capacity

Labour for hoisting plastic water storage tank.Upto 1500 litre capacity.a) Upto 1st story from G.L.

Labour for lowering plastic water storage tank and stacking in places as directed.i) Upto 1500 litre capacitya) From 1st floor to G.L.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying ,fitting ,fixing pvc valve25mm approved brand.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.ii) 20 mm

Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.ii) 20 mm Pipe 25mm

Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.ii) 20 mm Pipe 20mm

Earth work in excavation of foundation treanch… in all sorts of soil. a.Depth not exceeding 1500 mm

Filling in foundation &plinth by silver sand in layer….includingthe cost of supply of sand.

Laying Polytheen Sheet over Sand ………….etc.

Ordinary cement concrete m-10 (1:2:4) with graded stone chips (20 mm down) excluding shuttering & re enforcement if any ground floor as per I.S. 456-2000

125mm th. Brick work with 1st class brick in cement mortar(1:4)

250mm th. b/w

15mm Plaster with sand cement morter (1:6)

(d)10mm th. Celing plaster(4:1) Room

Neat cement punning 1:5 mm th in wall dado windo sills ,floor drains etc @0.125 cum per100 sq.m

Artificial Stone in Flooring with sand ,cement &Stone chips Prop. (4:2:1),25 mm th

Ordinary cement concrete m-20(1:1.5:3) with graded stone chips (20 mm down) excluding shuttering & re enforcement if any ground floor as per I.S. 456-2000

Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening andremoval of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16gauge black annealed wire at every intersection, complete as per drawing and direction.a) For works in foundation and upto roof of ground floor/upto 4 mI. JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL

Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approvedthickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out aftercompletion of works (upto roof of ground floor)a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge.

M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr

Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary :On timber or plastered surface Two coats (white in shade)

Supplying , fitting , Fixing 1st. Quantity Cramick Tiles in floors to mach …. Etc. P-64, SL NO-35(a) (a) Wall

Supplying , fitting , Fixing 1st. Quantity Cramick Tiles in floors to mach …. Etc. P-64, SL NO-35(a) (a) FLOOR

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)