Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-Finance | ₹4.1 L | L1 | Accepted-Finance 01st Position |
| 2 | L2₹4.1 L+₹2,780 (0.68%)Rejected-Finance | ₹4.1 L+₹2,780 (0.68%) | L2 | Rejected-Finance 02nd position |
| 3 | L3₹4.3 L+₹20,360 (5.01%)Rejected-Finance RANGAT | ₹4.3 L+₹20,360 (5.01%) | L3 | Rejected-Finance 03rd Position |
| 4 | L4₹4.5 L+₹41,980 (10.3%)Rejected-Finance | ₹4.5 L+₹41,980 (10.3%) | L4 | Rejected-Finance 04th position |
| Sl No | Description | Qty | Unit | Radha Kumari L2 | M KARIKALAN L3 | ARUN K JOSEPH L4 | D. KARTHIKA L1 |
|---|---|---|---|---|---|---|---|
| 1.00Providing and fixing to existing door frames. | |||||||
| 1.10 | 24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter). | 4 | sqm | 3,500 ₹14,000 | 3,100 ₹12,400 | 5,000 ₹20,000 | 3,000 ₹12,000 Lowest |
| 2.00 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | 12 | metre | 1,200 ₹14,400 | 540 ₹6,480 | 500 ₹6,000 Lowest | 510 ₹6,120 |
| 3.00Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. | |||||||
| 3.10 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover | 6 | sqm | 7,500 ₹45,000 | 7,000 ₹42,000 | 7,000 ₹42,000 | 6,900 ₹41,400 Lowest |
| 4.00Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | |||||||
| 4.10 | One or more coats on old work | 80 | sqm | 250 ₹20,000 | 145 ₹11,600 | 170 ₹13,600 | 140 ₹11,200 Lowest |
| 5.00Finishing walls with water proofing cement paint of required shade: | |||||||
| 5.10 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | 250 | sqm | 250 ₹62,500 | 140 ₹35,000 | 250 ₹62,500 | 130 ₹32,500 Lowest |
| 6.00Finishing walls with textured exterior paint of required shade: | |||||||
Tender Value
₹4.3 L
EMD Value
₹8,565
Closing Date
1 Jun 2026, 3:00 pmClosed
General Manager (CW)
General Manager (CW) Vikas Bhawan, ANIIDCO
Repair and maintenance of Milk Chilling Centre at Tugapur, Mayabunder
2026_ANCVL_22544_3
ANIIDCO/CW/25-26/TD-31
Open Tender
Civil Works - Buildings
Item Rate
30 days
Tugapur, Mayabunder
As per tender documents
6 documents required · 6 mandatory
₹0
₹8,565
15 Jun 2026
15 May 2026
2 Jun 2026
16 May 2026
1 Jun 2026
25 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing to existing door frames. | |||||
| 1.1 | 24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter). | 4 | sqm | 2,969.25 | ₹11,877 |
| 2 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | 12 | metre | 492.7 | ₹5,912.4 |
| 3Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. | |||||
| 3.1 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover | 6 | sqm | 3,307.05 | ₹19,842.3 |
| 4Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: | |||||
| 4.1 | One or more coats on old work | 80 | sqm | 102.8 | ₹8,224 |
| 5Finishing walls with water proofing cement paint of required shade: | |||||
| 5.1 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | 250 | sqm | 112.9 | ₹28,225 |
| 6Finishing walls with textured exterior paint of required shade: | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
TenderdocTP3.pdf
Tender Documents • 0.88 MB
TendernoticeTP3.pdf
Other Documents • 0.41 MB
BOQ_24454.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .