REPAIR TO ROOF TREATMENT INCLUDING TILING , PERIODICAL SERVICES AND OTHER ALLIED MAINTENANCE TO E/M INSTALLATIONS UNDER GE(U) E/M MEERUT CANTT

Amount

Demolition brick work or stone masonry/PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches , pillars etc but excluding ashar facing , dressed stonework and precast concrete articles, complete all as specified and directed.

Dismantling posts struts ( wood, steel or RCC) any section embedded in concrete , brick work masonry etc inclujding taking out enbedded portion and making good disrubed ground, complete all as specified and directed.

Excavating in post in ordinary soil ( or similar holes ) each n, exc 0.50 cum getting out ( returning filling in and ramming earth or broken mixed with earth around in layer n, exc 25 cm watering) and removing surplus soil to a distance n,exc 50M, complete all as specified and directed.

M&L plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundation, filling and mass concrete, complete all as specified and directed.

M&L brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:4 , complete all as specified and directed.

Do as per above item No.5 but except brick

M&L cement concrete type B1, 1:3:6 (using 20 mm graded crushed stone aggregate), cement concrete in roof kerbs or mud stops, rounded or chamfered on edges , complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plate rails braces etc complete drilled for fixing of steel sheeting other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting ( exclusive of steel sheeting or other covering running rails and guides ) and hanging also fastening and fixing , complete all as specified and directed.

M&L mild steel work as in hand rail, half round or other stock section or core for wooden han rail straight portion drilled and counter sunk for balusters running bars, for doors, baluster, nosing to steps including embedded in concrete and screwing etc wind tie for roof including securing bolts posts and struts in fencing incuding cutting tops to shape as directed drilling holes notching for wire, etc flat iron fillets ( for securing mesh etc, including all necesary drilling bolting or riveting etc and similar work conforming to fe 290 Gde E 165 , complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of syenthetic enamel paint complete all as specified and directed.

M&L mild screw bolts ( Machine made ) with hexagonal or square heads at one end and screwed the other , or screwed bothe ends , each screwed end to be fitted with washers and one hexagonal or squre nut, exc 10 cm long and 5 to 10mm dia of shank, complete all as specified and directed.

Supply only chain link fencing ( weighing not exceeding 4 kg/sm) including line wire ( if specified of GI wire ) of specified mesh size and type and line wire to any type of standards rails straining bolts etc including provision of binding wire complete al as specified

Fixing only chin link fencing including wires any mesh size and type of standards , rails straining bolts etc including provision of binding wire, complete all as specified and directed.

Taking down existing barbed wire fencing and S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured)

M&L mild steel TMT bars 10mm dia and over , cut to lenght , bend to shape required including cranking bending sprially for hooping columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L preparation of new steel surfaces of any description not other wise desribed over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat red oxide zinc chrome primer , complete all as specified and directed.

Taking down cement plaster on brick or stone walls , concrete bolck walls ,including racking outs joints hacking for key, scrubbing down with water any description etc and removing off the rubbish complete ll as specified

M&L applying 10 mm thick rendering using ready mix plaster bags on brick/ concrete surfaces of external walls finshed even and fair including using water proofing compound @ 3% of weight of cement as per manufactures instruction complete all as specified. Note No1:- Make of ready mixed plaster: Ultratech Readyplast, ACC Accoplast , Birla Aerocon, Note No.2:- Contractor shall bring total bags of ready mix plaster required against the work at site as approved by GE, before commencement of the plastering work

M&L applying 15 mm thick rendering using ready mix plaster bags in cm (1:6) on brick/ concrete surfaces of internal walls finshed even and fair instruction complete all as specified. Note No1:- Make of ready mixed plaster: Ultratech Readyplast, ACC Accoplast , Birla Aerocon, Note No.2:- Contractor shall bring total bags of ready mix plaster required against the work at site as approved by GE, before commencement of the plastering work

M&L 75mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggragate as in foundation, filling & mass concrete all as specified and directed.

M&L sand filling under floors including watering & consolidation concrete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed.

M&L chequered cement concrete tiles 30X30X25 mm thick jointed and pointed in neat cement slurry in with grey pigmenet and pigment over and including screed bed in cm 1:6 concrete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantlig Stone slabs and tiles of any description or thickness in floors, aprons etclaid and bedded and pinted in any mortar, concrete all as specified and directed.

Demolition of cement Concrete( unreinforcement) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L 25 mm thick cement concrete type B1, 1:2:4 ( 20 mm graded crushed stone aggregate ) concrete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed

M&L desiger digital glazed ceramic coloured tiles of size excd 0.11 sqm and not excd 0.18 sqm , 7-8mm thick , on vertical surfaces such as dados skirting and risers to step etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and incuding 10mm thick backing coat in CM 1:4 complete all as specified. ( the quoted rate shall deem to be included for screening and shall not be measured and paid separately ).

M&L 20-25mm thick machine cut Kota stone slab of size 550mmx550mm in flooring laid and jointed with grey) cement sturry mixed with pigment to match the shade of the slab including rubbing and polishing to give high gloss (mirror) finish complete over and including 15 mm tnick screed bed in cm 1:6 , complete all as specified and directed.

Ditto as per above item No. 30 but on vertical surfaces as in skirting dado over and including 10 mm thick backing coat in cm 1:4 concrete all as specified and directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking up or down GI steel tubing, testing complete all as specified & directed.

Supplyand fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe, with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & plag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish concrete all as specified and directed.

Supply & fix in repairs steel C.P. grating 100 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair complete all as specified & directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty , complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes, complete all as specified and directed.

S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

S&F in repair Galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stappler, complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame , complete all as specified and directed.

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing, complete all as specified and directed.

M&L Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, including filling of cement concrete type B1 1:2:4 ( using 12.50 mm graded crushed stone aggregate etc, supplied and fixed, complete all as specified and directed.

S&F 35 mm thick plain framed panelled shutter ( two panel ) with lock rail and panel of 9 mm BWP commercial or 12 mm veneered particle veneering on both faces the size of rail stile as per IS 1003 ( PartI) kilnseasoned and chemically treated , complete all as specified and directed.

S&F steel rolling shutter 1.25 mm thick laths with out ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected complete push pul or manual type including taking down old rolling shutter, , complete all as specified and directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F aluminium anodized handle of size 150 mm, ISI marked, complete all as specified.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified.

M&L broken bricks hardcore of gauge n, exc 63 mm deposited spread and levelled in layer n, exc 15 cm thick watered and ramming to a true surfaces complete all as specified

M&L 100 mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as floor laid in bays even and smooth without using extra cement, concrete all as specified and directed.

M&L 12 mm thick granite stone slab ( of any type ) work ( tablr rubber and polished to mirror finish) in steps jambs , pillers window cills cooking platforms and like in cement mortar ( 1:4) including pointing in white cemen ( 1:2) using narble dust with admixture of pigment to match the shade of granite over and including 10 mm thick screeding in cm 1:4 including making holes for pipes etc bull nosing on all external faced complete all as specified

Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primercoat to match the existing as required, complete all as specified & directed.

M&L preparing old cement base distempered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat with cement base paint , white or tinted including and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of new plastered surfaces of walls and distempering with distemper oil bound emulsion , two coats, white or tinted with roller over a coat of 1 mm thick wall care putty and one coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of old plastered /unplastered surfaces of walls by applying 1 mm thick Wall care white ( Putty) and sand papering surfaces to achieve smooth surfaces and applying distempering with distemper oil emulsion , two coats, white or tinted over a coat of alkaline resisant primer including with rollerwashing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Complete removal of existing treatment for Preparing old/new decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered andpainted surfaces over and applying a coat of putty one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified. Make : Apex Altima Proyek, Nerolac Exal Total , Barger weather coat

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cm 1:4 with water proofing compound as per manufacture instruction concrete all as specified and directed. Note : water proofing compond shall be measured separetely

Supply only water proofing compound

M&L for cleaning the existing surfaces and removal of debris , loose particles , grass etc and existing water proofing roof treatment completely and repairing the cleaned surfaces through repair mortar and providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:1 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completelyincluding 10 mm thick cement plaster in cm 1:4 and all as specified and directed Make : Asian Paints /Thermax

M & L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of syenthetic enamel paint complete all as specified and directed.

M/S VIKRANT ENTERPRISES

SHAKTI CONSTRUCTION CO