Construction of new OPD block at IGMC Shimla SH Providing fire fighting in trauma block therein

Amount

Fabricating, supplying, installation, testing and commissioning Air Vessel of continuous welded construction with flanged discharge header on the top of each riser fabricated out of 8 mm thick MS sheet, air release valve complete with suitable drain arrangement with 25 mm dia gunmetal ball valve complete with all accessories etc. pressure gauge, synthetic enamel paint of approved shade as required of the following sizes:- (The equipment will be insulated.)

1.2 meter high and 250 mm dia

Sub Head-II- (Hydrants System)

Supplying and fixing single headed internal hydrant valve oblique pattern with instantaneous stainless steel coupling of 63 dia with cast iron wheel ISI marked, comforming to IS: 5290 (Type A) with 80 mm dia flanged inlet , with ABS cap and chain complete with all accessories etc. as required.

Supply, installation, testing and commissioning of 63 mm dia, 15 mtr, long RRL hose pipe with 63 mm dia, male and female stainless steel couplings duly binded with G.I. wires rivets etc. ISI marked, IS 636 (type-A) as required.

Supplying and fixing 63 mm dia, stainless steel branch pipe with 20mm dia nozzle comforming to IS:903 suitable for intantaneous connections to hose pipe coupling etc. as reuired

Supplying and fixing first aid hose reel, wall mounting swinging type, complete with drum & bracket of MS construction, spray painted in Post office Red, confirming to IS 884 / 1995 with upto date amendments, complete with the following as required.

36 meter long 20mm dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585

20 mm dia ball valve & nozzle

Drum and brackets for fixing the equipments on wall

Connection from riser with 40mm dia (Gun metal) stop valve & M.S. Pipe.

Providing and fixing 15mm dia chrome plated quartzoid type sprinkler head with quartzoid bulb and set to operate at specified temperature.

Upright, 68°C

Pendent 68°C

Supplying and fixing S.S. flexible drop for sprinklers of length 1200mm and Dia 25mm.

Supplying and fixing vane type water flow switch suitable for installation on 50 mm to 150mm dia line for a service pressure upto 20 Kg/ Sq.cm of potter / system sensor / Angus.

SUB HEAD-III- (PIPING, VALVES AND ACCESSORIES)

Supplying, laying, fixing, testing and commissioning of following sizes (NB) of class 'C' M.S. Pipes confirming to IS 1239 and 3589 including cutting, threading, welding etc. and providing all fittings e.g. elbows, reducers, clamps, hangers, flanges, gaskets, nuts, bolts and washers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and shade including cutting holes and chases in brick or RCC walls / slabs and making good the same etc. complete in all respect as required.

150 mm dia

100 mm dia

80mm dia

65 mm dia

50 mm dia

40mm dia

25 mm dia

Supplying, installation, testing and commissioning of butterfly valves of PN 1.6 rating of following sizes with EPDM rubber lining seat and CF-8 stainless steel disc duly ISI marked and stainless steel stem with lever / gear operation and cast iron body in powder coated finish for fire fighting application complete in all respects comfirming to IS:13095 as required.

100 mm dia

65 mm dia

50 mm dia

Supplying and fixing of fire man's axe with heavy insulated rubber as per standard conforming to IS 926

Providing & fixing angle iron (40 mm X 40 mm X 5 mm) door frame and MS sheet (2 mm thick) cum glass shutter of size 2.1 mtr. X 1.2 mtr. (N.S) with 25mm X 25mm X 3mm angle frame all around & stiffened in between including hinges, handle, locking arrangement, painting with approved synthetic enamel paint including sign writing on glass at internal hydrant including providing & fixing MS sheet 2 mm thick on remaining portion above door to close opening including painting etc. as required.

SUB HEAD-IV-(FIRE EXTINGUISHERS)

Supply, installation, testing and commissioning of ISI marked (IS: 15683 : 2006) portable chemical fire extinguisher, water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specification.

Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube , 1 meter long high pressure discharge hose, non-conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS: 15683:2006

4.5 KG capacity cylinder

Providing and fixing dry chemical powder (D.C.P.) type fire extinguisher (IS: 15683 :2006) with 10 Kg capacity

SUB HEAD-V-(MOTOR CONTROL PANELS)

Fire Fighting Diesel Engine Panel

Supplying, assembling, erecting, connecting, testing and commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed non-draw out moduler type compartmentalized Panel fabricated out of 2.0 mm thick CRCA sheet hinged doors of 1.6 mm thick CRCA sheet, duly painted complete with earth bus, aluminium bus bar, numbering & sign writing, interconnection& including the cost of connection through bus-bar / copper conductor flexible connection with necessary interlocking with existing panel as shown in drawing as per specification and mounted with the followings.

SUB HEAD-VI-(CABLE TRAY, CABLING AND EARTHING)

CABLES

Supplying of XLPE insulated, PVC flexible copper conductor cable of following sizes on surface / in existing cable tray duly clamped as required.

6 Core 2.5 Sq. mm

2 Core 1.5 Sq.mm

KHARBANDA ELECTRICALS