PROVN OF CERTAIN ORIGINAL WORKS (SPECIAL REPAIR, REVENUE WORK AND MINOR WORK) UNDER GE(AWC) MHOW

Amount

Surface excavation n. exc 30cm depth and averaging 15cm deep and getting out in soft/loose soil.

M&L for 150 mm spread thick soling with broken boulders or quired stone, interstices filled , surface formed and rolled and consolidated to required gradient and camber.

Rolling to Soling of broken boulder or quirried stone n.exc. 15 cm thickness using 8 to 10 ton Power roller

M&L Cement concreate type B-0 1:2:4 12.5mm grade aggregate finishing cement concret surface even and smooth 40mm thick.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Exavation in post hole or smilar holes each n exe 0.5 cum, getting out in ramming earth or broken rubble mixed with earth around in layers n exe 25 cm watering and removing surplus soil to a distance n exe 50 m and making good surface in soft /loose soil.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m radius, built in CM in 1:6 inclu all as specified.

M&L for preparation of new steel & iron surface of width or girth exceeding 10cm & applying two coats of synthetic enamel paint over a coat of red oxide.

S&F roof trusses(framed), trussed, posts, purlins, ratters, crane grantries, railes and fastenings and heavy bracket framing (Beam, tee, angel channel or flat sections) including distance piece cleat etc

M&L for rendering 15 mm thick plaster in CM 1:4 on Brick/stone masonry surface and to be finished even and smooth without using extra cement.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

M&l PCC 1:2:4 type B1using 20 mm grade stone aggregate Providing and fixing pre-cast cement concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, rackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

S & F vitreous china urinal white , bowl type (back or corner wall type) of size 465mm x 355mm x 265mm complete including providing and fixing plugs in cement mortar 1:2 and fixing with and including brass screws 60 mm in length, complete.

M&L brick work with sub class 'B' modular brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water complete all as specified.

M & L for rendering 10mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, complete.finished even and smooth without using extra cement.

Material & Labour for rendering in cement mortar 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement including mixing with liquid WPC on top 5mm thick only Note :- Water proofing compound shall be paid separately

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer incl 3mm thick wall putty complete.

M & L for complete removal of existing treatment on walls and applying two coats of oil-bound distemper over a coat of primer on old plastered surfaces including necessary preparation to surfaces complete incl 3mm thick wall putty all as specified and as directed

M & L, for preperation of new surfaces of walls by washing/rubbing down and applying two coat of cement base paint white or tinted over a coat of cement base primer complete all as specified and as directed.

M & L, for preperation of old surfaces of walls by washing/rubbing down and applying two coat of cement base paint white or tinted complete all as specified and as directed.

Material and labour for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparation of old surface of wall and applying two coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L applying three coats of white wash on new Ceiling,chajja surface including preparation of surface.

M&L applying two coats of white wash on old Ceiling,chajja surface including preparation of surface.

Demolition old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. Note :- Tiling shall be as in patches or of any size or any description , any colour, any location or all as directed by Engineer - in -Charge.

M & L for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors over and including 15mm thick screed in CM 1:6 , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles.

M & L for Glazed coloured ceramic tiles of size 300mm x 450mm x 7 to 10mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick rendering in CM 1:4 and pointed in coloured cement to match complete all as specified and directed.

M&L 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6)

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 sq.m. each with shutters (without taking off shutters from the frames)

Taking down chowkats or frames exc. 1.5 sq.m. n.exc 4 sqm each with shutters (without taking off shutters from the frames)

Taking down door shutter from frame exc 1 Sqm but not exc 2 Sqm each and refixing the shutter in the same opening after easing and adjusting.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each .

Taking down shutter of any description n exc. 1 Sqm each complete.

S&F Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable prelam PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm

M&L Providing, cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed

S & F 2nd class HW 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

M&L Cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified.

S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc all as specified and directed.

S & F glazed skelten shutter, 35 mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) suppled and fittted to chowkats.

Taking down Aluminium door shutters exc 1 sqm and n exc 2 Sqm each and refixing in same opening after resetting ,, resecuring or easing & adjusting including necessary bolts and nuts, securing rods , washers etc complete all as specified and directed .

S & F in Anodised aluminium window and ventiletor shutters aluminium section coloured powder coating not less than 50micron,weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges, ,lock anodised aluminum snap beading screws and powder coated aluminium sliding glazed windows/ventilater with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick shall be fixed in all around by CP screws with @ 300 mm c/c for fixing of windows frame.screws. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. with self lock arrengements. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality with rubber gasket for fixing of glass pane. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter at end -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Stainless steel wire mesh of 0.36 mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) Cromium plated screw 300 mm C/C for fixing of frame with wall. (x) Aluminium grill DG 104, DG 02

S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples in repairs complete all as specified and as directed.

M & L preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint.

S&F Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M & L preparation of new steel surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F 3mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

S & F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

S & F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F in repairs 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F 150 mm size aluminium anodized handle complete all as specified

S&F in repairs150 mm size aluminium anodized handle complete all as specified

S & F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F in repairs 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

Supply and fix in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete as fixed in repairs.

S & F in repair CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule as fixed in repairs complete all as specified and directed.

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

S & F PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair.

S & F in rep CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repairs Wall mixture cromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.Make Jaguar or equivalent.

S & F in repairs Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete.

S&F in repair 20mm bore dia stop valve cast copper alloy screwed down , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S & F in repairs CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed 20mm dia

S & F in repair stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as spd and directed by Engr-in-Charge.Note : siz of plate rack should not be less than 900x 1200mm and weight of rack shall not be less than 8.50 kg each.

Taking down steel tubing 15mm bore and connections complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore all as specified and directed by Engineer - in - Charge.

S & F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.15mm dia

S & F GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.20mm dia

S&F in repair gratings round type 125mm size of Stainles steel, (Min Weight 100 gms) complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 ltr & n exc 1000 ltr.

S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) triple layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site and should be sintex antibacterial or equivalent complete all as specified and directed.

S & F 20 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule.

Dismantling of cast iron/pvc pipes jointed in cement mortar 100 mm bore all as specified and directed

Dismantling of cast iron/pvc pipes jointed in cement mortar 75 mm bore all as specified and directed

S&F 110mm PVC soil,waste and vent pipes single socketed in any length with or without ears, with cement joints,laid in trenches or in floors/wall.

S&F 75mm PVC soil,waste and vent pipes single socketed in any length with or without ears, with cement joints,laid in trenches or in floors/wall.

S&F PVC bends any radius bore of 110 mm bore with oval access door all as specified and directed

S&F PVC bends any radius bore of 75 mm bore with oval access door all as specified and directed

S&F 110mm PVC branch piece double (equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches all as specified and directed

S&F 75mm PVC branch piece double (equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches all as specified and directed

S&F 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

M & L PVC floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) all as specified and directed

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M & L 100 mm thick Cement concrete type D-2, 1:2:4 (40mm graded aggregate) including necessary form work as in Path/flooring, surface finished even & fair without using extra cement complete all as specified.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base under floors complete all as specified and directed.

M&L Cement concrete Type B-1,1:2:4 (20mm graded stone aggregate) as in Curb, coping and edge of hardstanding complete all as specified and directed.

S&F in repairs 25 mm dia Stainless Steel curtain rod thickness not less than 0.75mm complete all as spd &directed

S&F in repairs 25 mm dia Stainless Steel curtain rod brackets including necessary stainless steel clamp complete all as spd &directed

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs 100mm hasp and staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and as directed.

S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised

S&F in repairs brass chromium plated corner glass shelf with bracket complete all as specified and directed.

S&F in repairs soap dish (ovel) type mild steel chromium plated of size as sample kept in sample room complete.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as directed.

S & F Steel work in tubular trusses and tubler sections including special shaped washer etc.complete using ERW 1979 or induction butt welded tubes conforming to I.S. 1161-1179 grate St-240 as Specified.

S & F Joist, channel, angle or tee , square or rectangular,fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

S & F Hand rails, half round or other steelsection or core for wooden hand-rail straight portion, drilled and untersunk for balusters running bars, for doors, balusters, nosing to s teps including embeding in concrete and screwing etc. wind ties for roof including securingbolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings

S&F pre painted galvalume aluminium zinc coating steel based plain steel sheet 0.50 mm thick of any colour having rensile strength of 550 Mpa as in roof/covering/cladding to wall, fixed with self tapping screws all as specified and as directed at site.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Cement concrete tiles 25cm x 25cm x22mm thick, with grey cement & no pigment machine pressed; set, jointed & pointed in neat cement slurry in floors, & cut & polished over 15mm thick screed in CM(1:4)

Demolition and breaking up drain pipes 100mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S&F in repair for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified and directed..

Demolition/dismantling of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for brick work with FLY ash Bricks modular size straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 50mm thick sand cusioning.

Sand filling under floors or in foundation including watering & consolidation

M&L19/20 mm thicknes Pre laminated interior grade both side laminated frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc sheet 2 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 15 mm thick plaster in one layer in CM 1:4 on concrete/fair faces of brick surface, with surface finished fair & even.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains haunching complete all as specified and as directed.

Extra for forming fair finished channel 45 Cm inner girth in cement concrete using extra cement, including moulds mitred stopped ends etc, complete.

M&L providing precast cement concrete tybe B-1( 20mm graded stone aggregate) in landing, cover slabs( For manholes,drains etc) and in similar works set in CM 1:4 complete.

S & F mild steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip quality complete.

S&F PVC (SWR) pipe 50mm dia single socketed in any length provided as in weep hole in brick wall etc complete all as specified and as directed.

Add /deduct for each 25mm girth or part thereof over or under 45 cm girth complete. Note: This item is applicable for adjustment of girth of channel during execution.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling as mass concrete incl formwork complete all as specified and as directed.

M&L Re-inforced concrete pipe dia 300 mm (internal dia) Class NP-2 laid and jointed complete with collars

S&Fixed of continuous plano hinges mild steel bright finish or electro galvanised for 30mm thickness.

S&F in repair PVC Mirror cabinet of size 0.45x 0.30m with doorshutter complete all as specified.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness including cover fillets complete.

M & L 12 mm thick Gypsum Board as in ceiling or wall penalling fixed with screws as per manufactur's instructions complete all as specified and directed.

S & F Anodised aluminium sanp grid frame work of size 605 x 605 mm for flase ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessar y arrengements complete all as specified and directed

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium point wiring light, fan, sockets , all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the One light / fan /bell controlled by one, one way switch 5/6 Amps.

Description same as per Item No. 159.00 but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch.

Description same as per Item No. 159.00 but One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets , and making good disturbed surface of walls and floors etc. complete all as specified and directed

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S/F modular bell push type 6 A ,1 module complete all as specified and directed.

S/F bell multi music type AC 230 volts single pole complete all as specified and directed.

Supply and fixing surface /wall mounted LED batten poly carbonate housing for retrofit LED tube T-8 type upto 1x20 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed.

Supply and fixing retrofit LED tube T-8 type 1x20 watt, 5700 to 6500 K and THD less than 15% , polycarbonate body ,glass tube 4 feet long complete with 02 years warrenty all as specified and directed.

Supply and fixing wall mounted LED tube light fitting 10 watts comprising batten of extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED 2 feet long ,THD less than 15% complete all as specified and directed.

M&L for LED Bulk head fitings 6.5 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S & F LED bldg security light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed.

S&F MCCB ,DB VTPN wall mounted double door 6 way 415 volts with facility to provide MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed.

S&F MCB DB SPN 8 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F MCCB 3 pole 415 V 125 A Hz with rupturing capacity 25KA.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed

Sub main wiring with 2 single core,6 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 6.0 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

Taking down existing exhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yard complete all as specified and as directed.

S&F in replacement of exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver all as specified and as directed.

M&L for painting of ceiling fan 1200 mm sweep complete with synthetic enamel paint by spraying , filling cavities with filler, one coat after cleaning all dust incl hanging into its original position, changing of conopies,connection wires all as directed.

S&F in replacement of exhaust fan , steel body AC single phase 230 volt of size 300 mm mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed.

S&F fan regulator stepped electronic, modular type 02 module as specifed and directed.

M&L for single phase meter protection box conceiled in wall made pout of MS sheet 2 mm thick of size 200 mmx200x150mm complete with hinges and 2mm thick MS door with acrylic/glass opening of size 100mmx100mm for meter reading complete incl two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW , storage capacity of 25 Ltrs with all connected accessories complete all as specified and directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Goyal Construction

Jamna Constructions

sunway associates

M/S Ashish Construction

M/S UnitedConstruction