Repair of Distribution System for Pojewal Distributary no. 1 off taking RD 2150 m of Pojewal Lift Irrigation scheme off taking RD 112.546 KM left side of Kandi canal Stage-II ( Outlet RD 2180 Mtr. AND 3495 Mtr.)

Amount

Supply and Fixing of Socketed 160 mm uPVC pipe 2.5 kg/cm2 pressure ISI mark confirming to ISI 4985 (Premium make such as Supreme/Finolex/Jain etc).

Supply and Fixing of Socketed 225 mm uPVC pipe 2.5 kg/cm2 pressure ISI mark confirming to ISI 4985 (Premium make such as Supreme/Finolex/Jain etc).

Supply and Fixing of Socketed 250 mm uPVC pipe 2.5 kg/cm2 pressure ISI mark confirming to ISI 4985 (Premium make such as Supreme/Finolex/Jain etc).

Supply and Fixing of Socketed 280 mm uPVC pipe 2.5 kg/cm2 pressure ISI mark confirming to ISI 4985 (Premium make such as Supreme/Finolex/Jain etc).

Providing & Fixing CI/DI Flange end, stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and insertion sheet, all cariage complete in all respect as per PWD specifications and instructions of the Engineer-in-Charge. Special quality sluice valve (PN1.6) of premium range such as make Kirloskar as approved by Engineer-In-Charge. (For 150/160 mm i/d)

Providing & Fixing CI/DI Flange end, stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and insertion sheet, all cariage complete in all respect as per PWD specifications and instructions of the Engineer-in-Charge. Special quality sluice valve (PN1.6) of premium range such as make Kirloskar as approved by Engineer-In-Charge. (For225/250 mm i/d)

Providing & Fixing CI/DI Flange end, stem of SS (AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and insertion sheet, all carriage complete in all respect as per PWD specifications and instructions of the Engineer-in-Charge. Special quality sluice valve (PN1.6) of premium range such as make Kirloskar as approved by Engineer-In-Charge. (For 280/300 mm i/d)

Supply and fixing Alpha valve 160 mm dia. including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing Alpha valve 225 mm dia. including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing Alpha valve 250 mm dia. including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing Alpha valve 280 mm dia. including carriage, rehandling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

CONCRETE

(10.13) 1:2:4 Cement concrete

(a) With shingle stone

(i) mixing by manual means

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.

Providing & fixing of 160 mm dia. uPVC Bend for (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of Engineer in charge.

Providing & fixing of 225 mm dia. uPVC Bend for (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of Engineer in charge.

Providing & fixing of 250 mm dia. uPVC Bend for (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of Engineer in charge.

Providing & fixing of 280 mm dia. uPVC Bend for (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of Engineer in charge.

Supply and fixing of 160 mm dia. uPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 225 mm dia. uPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 250 mm dia. uPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 280 mm dia. uPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. (For 200 x 160 mm)

Supply and fixing of uPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. (For 225 x 180 mm)

Supply and fixing of uPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. (For 225 x 200 mm)

Supply and fixing of uPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. (For 280 x 200 mm)

Supply and fixing of ISI marked uPVC C.I D joint (Complete with nut, bolt & rubber rings) as per IS 8794 for including, cutting, jointing, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge. (For 150/160 mm dia.)

Supply and fixing of ISI marked uPVC C.I D joint (Complete with nut, bolt & rubber rings) as per IS 8794 for including, cutting, jointing, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge. (For 250 mm dia.)

Supply fixing flange tail end point with CI flange for 160 mm x 6 Kg including carriage rehandling loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply fixing flange tail end point with CI flange for 250 mm x 6 Kg including carriage rehandling loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply and fixing of flange tail end point with CI flange for 300/315 mm x 6 kg including carriage rehandling, loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply and fixing of 160 mm dia. socket including carriage, re-handling, loading unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing of 225 mm dia. socket including carriage, re-handling, loading unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing of 250 mm dia. socket including carriage, re-handling, loading unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing of 280 mm dia. socket including carriage, re-handling, loading unloading, testing etc. respect as per PWD specifications and instructions of the Engineer-in-Charge.

Compensation of Crops various agriculture produce(To be paid)

WATER SUPPLY

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes,refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 metercomplete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

((e)) C.I Single air valve screwed (Size 80mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

any other item

NEM KUMAR BANSAL CONTRACTOR