Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.0 L+₹93,619 (2.53%)Rejected-AOC | L2 | Rejected-AOC SECOND LOWEST BIDDER | |
| 3 | L3₹40.2 L+₹3.1 L (8.50%)Rejected-AOC | L3 | Rejected-AOC THIRD LOWEST BIDDER | |
| 4 | L4₹40.5 L+₹3.4 L (9.22%)Rejected-AOC 0 PUKHTA BAZAR JAHANGIRABAD RURAL BULANDSHAHR UTTAR PRADESH 203394 | BULANDSHAHR | UTTAR PRADESH | 203394 | L4 | Rejected-AOC FOURTH LOWEST BIDDER | |
| 5 | L5₹40.5 L+₹3.5 L (9.38%)Rejected-AOC | L5 | Rejected-AOC FIFTH LOWEST BIDDER |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
11 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin 901208 c/o 56 APO
PROVN OF R AND D INSP SHED WAITING HALL WITH 6 FEET VERANDAH AND 1 TOILET PROVN OF DRAIN IN SITNI ENCLAVE AND CERTAIN OTHER SANCTIONED WORKS AT NAGROTA UNDER GE NAGROTA
2023_MES_580717_1
GEN-77/2022-23
Open Tender
Civil Works
Works
180 days
Nagrota
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
₹95,000
Yes
23 May 2023
13 Feb 2023
13 Mar 2023
13 Feb 2023
11 Mar 2023
27 Feb 2023
Amount
SCHEDULE ‘A’ PART-I Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil complete all as specified and directed
Surface excavation n.exc 30cm deep and avg 15 cm deep and getting out any type of soil complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soilscomplete all as specified and directed.
Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed
Spreading and levelling in layers n exc. 25 cm thick well ramming including watering as required using soil obtained from excavation complete all as specified and directed
M & L for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed
M & L for Plain Cement Concrete Type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed
M & L for Broken brick bat hardcore of gauge not exceeding 63 mm of broken bicks / brick bats , deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M & L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing.
M & L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.
M & L for Brick work with sub-class `B' old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed
M & L for Brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in complete all as specified and directed
M & L for 40 mm thick Damp proof course in PCC 1:2:4 type B-0 horizontal or vertical surfaces including necessary formwork complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M & L for Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in Chajjas complete all as specified and directed.
M & L for Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed
M/L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M/L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed
M & L for formwork to sides and soffits of floor or roof beam, beam hauchings, girder, bressum-mers, lintels, cantilivers, shelves incl supports, overhangs, etc.also splay between floors and beams, etc. for rough finished surfaces complete all as specified and directed
M & L for TMT bar 10mm dia and over cut to length bend to shape required indd cranking bending spirally for column, hooking ends & binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with chipscomplete all as specified and directed
M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified.
M & L preparing new plastered surfaces of walls and applying two coats of cement base paint over one coat ot primer complete all as specified and directed
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.
M&L rendering 5 mm thick on internal surfaces of ceiling in cement mortar 1:3 finished even & smooth without using extra cement as specified and directed.
M&L Preparing newly plastered surfaces of ceilings and applying three coats of white wash.complete all as specified and directed
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete over and including 20 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes over and including cement slurry @ 3 kg / sqm complete all as specified and directed
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete over and including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes over and including cement slurry @ 3 kg / sqm complete all as specified and directed
M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18 sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all as specified and directed.
S & F Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately complete all as specified and directed
S & F Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed Note:- Wire mesh and sheet glass shall be measured and paid separately
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed
S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed
S & F 100mm size extruded aluminium handle cast type anodised complete all as specified and directed
S & F 150mm size extruded aluminium handle cast type anodised complete all as specified and directed
S & F 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete all as specified and directed
M & L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified and as directed
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floorsor fixed to wall with suitable size of clamps nuts-bolts complete as specified.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floorsor fixed to wall with suitable size of clamps nuts-bolts complete as specified.
S & F 110mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete all as specified and directed
S & F 110 mm bore PVC (SWR) bends any radius. complete all as specified and directed
S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed
S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed .
S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed complete all as specified and directed
S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 grams complete all as specified and directed.
M&L PCC 1:2:4 type B1 using 20mm graded stone agregrate as in surface channel and drain incl formwork complete all as specified and directed
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed
M&L for Rendering 10 mm thick in CM 1:4 on concrete surfaces of roof surfaces finished even and smooth using extra cement incl liquid water proofing compound finished even and smooth using extra cement complete all as specified & directed. Note : Liquid WPC shall be measured and paid separately
M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] incl Liquid water proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : Liquid WPC shall be measured and paid separately.
M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed / hold fast blocks, benching, PCC cills and similar items complete all as specified and directed
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed
Supply only wire netting of galvanised steel wire, 0.71 mm dia & size of mesh 25 mm dia complete all as specified and directed.
S&F of 125 mm dia Fancy type Chromiun plated shower rose shower rose type fixed to 15mm dia pipe complete all as specified and directed.
M & L for Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed
M & L for 35 mm thick Plain framed, panelled shutter (one panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated without interlocking rail complete all as specified and directed
M & L for 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed
S & F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
M & L for 3 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M & L for Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified and directed
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified & directed.
M&L for glazed finish coloured Machine pressed precast conctete interlocking paver block of M-40 Grade any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, complete all as specified & directed.
M&L for Machine pressed precast conctete interlocking paver block of M-40 Grade any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, complete all as specified & directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.
M & L for Glazed ceramic colored tiles 300mmx600mmx 6 to 7mm thick in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
Supply and fix MS work as in wind ties for roof including securing bolts; complete all as specified and directed.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Material and labour for applying two coat of synthetic enamel paint over a coat of red oxide primer on new / untreated steel surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
Material and labour for applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
Material and labour forThree coat of white wash on newly plastered surface on wall including preparation of surface complete all as specified and directed.
M&L for PCC 1:2:4 tuype B-0 (using 12.5 mm graded crushed stone aggregate) with average thickness 50 mm laid in two layers of 25 mm thickness each with wire netting of 0.60 mm dia and size of mesh 12 mm x 12 mm laid between the two layers finished even and smoothes in roof padding all as specified and as directed. Note :- The wire mesh shall be measured and paid separately under the respective item below.
Preparation of concretye surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below :- (i) Applying a coat of bitumen primer membrane 0.4 ltr/sqm by the same membrane manufacture of density at 25 degree O' 0.87-0.89 Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen confoming to IS 702 @ 1.2 Kg/sqm. (iii) Applying polymeric polypropylene polymer membrane "APP" (Atactic poly propylene polymer) modified prefabreicated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core rainforced laid with 75mm gide overlap and 100 overlap in length using butane torch with 10cm over laps which shall be themo fused by flame. (iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR lates @ 200 ml/bag of cement and curved before laying membrane Make-IWL/Pidilite.
Material and labour for Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over one coat primer over & incl 3 mm thick wall care putty complete all as specified and directed.
Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M & L for Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position including PVC float valve 25 mm bore complete all as specified and directed..
Taking down 20 mm bore Gun metal Gate vlave Gun metal Gate valve ISI marked heavy duty with iron wheel head screwed both ends for GI pipe and supply and fixing complete in existing location , complete all as specified and directed.
All As per item no. 87 above but of size 25 mm bore, complete all as specified and directed.
Supply, lay and fix 25 mm bore galvanised iron water tube medium grade with all fitting and laid in trenches or floor or wall, complete all as specified and directed.
Supply, lay and fix 20 mm bore galvanised iron water tube medium grade with all fitting and laid in trenches or floor or wall, complete all as specified and directed.
Supply, lay and fix 15 mm bore galvanised iron water tube medium grade with all fitting and laid in trenches or floor or wall, complete all as specified and directed.
M & L for 15mm bore bib tap brass CP with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
S&F for CP Pillar taps, 15mm fancy type cast copper alloy, with capstan heads, screwed down high pressure, without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. complete all as specified and as directed.
S&F for Vitreous china squatting pan “ORISSA” pattern size 630x450mm ( Make : Hindware)white with integral foot rests all as fixed in repairs including cast iron ‘P’ or ‘S’ trap 100mm bore including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (600x15mm), flushing pipe complete all as specified and as directed.
S & F PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement complete all as specified and as directed.
S & F in repairs,Wash basins, vitreous china white of white, flat back, of size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end complete all as specified and directed .
S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed with & incl cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
S&F 110/125 mm bore PVC (SWR) gully trap setting and jointing with solvent cement fixed with & incl cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
S&F PVC (SWR) 'P’ trap cement fixed with & incl cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
S&F 75 mm bore PVC (SWR) gully trap setting and jointing with solvent cement fixed with & incl cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
S&F 32 mm thick Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms ) complete all as specified and directed .
M&L for Concealed Point wiring using approved colour coding as per IS with FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde of 1.5 sqmm alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volts grade of 1.5 sqmm size through and including 20 mm dia ( medium grade rigid non metallic PVC concealed conduit terminated in and incl pressed steel sunken boxes, readily available ( having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that he wall thickness shall not be less than 1.63 mm ) concealed type with 3 mm thick bakelit sheet cover for fixing switches , sockets etc. incl testing on completion complete incl cutting chasis for concealed conduit pinning incl making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.
All as per item No. 102 above above but for one 3 pin socket outlet point, 5 Amps control by one switch on same board with other switches complete all as specified and directed.
All as per item No. 102 above above but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified and directed.
All as per item 102 above before but point wiring with 2.5 sqmm FR multi stranded copper conductor cable for main circuit and 2.5 sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.
S&F switch piano flush type 5 Amps single pole one way complete all as specified and directed.
S&F Switch -Socket outlet 2 in 1, 3 pin, 6 amp flush type complete all as specified and directed.
S&F Switch -Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed.
S & F stepped type electronic fan regulatorsocket type flush type on the existing phenolic laminated sheet etc. as reqdcomplete all as specified and directed.
Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified & directed.
S & F Angular Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings with 10 watt B22 CDL 3 star LED lamp complete all as specified and directed.
Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary electric connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed. Make :-Havells Cat Part No Venti air-DB or equivalent in / Bajaj / Orient / Crompton
S&F Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
S&F baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as per Cat No BCLSB 05 WH of Bajaj or equivalent in Approved Make
Supply and fix LED Bulkhead luminaire 10 W Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and directed. Make:- Havells Cat No. RUGBYGENXFTS10WLED865SSYMBOPC or equivalent to Bajaj/Philips/ Wipro/ Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves
Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
S & F MCB SPN 40 -63 Amps C CURVE 10 KA 240 Volts complete all as specified and directed.
S & F MCB SP 6 to 32 Amps C CURVE 10 KA 240 Volts complete all as specified and directed.
Supply and laying or fixing or passing through pipe and testing PVC insulated aluminium conductor cable, 1100 Volt grade, heavy duty served with inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed, twin core stranded conductor flat or circular, 16 sqmm, nominal cross sectional area, as in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension wire complete all as specified and directed.
S&F LED Bldg Security light fitting of 25 watt fixed on & incl MS bracket, made out of 40 mm bore medium grade GI pipe 1.5 mtr long with MS clamps and nut bolts of suitable size complete all as specified and directed. Make:- Crompton Greaves Cat No. LSTS-25-CDL-M or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/ M/S Jaquar & Company Pvt Ltd/ Havells
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm bore GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.
Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor BLDC with copper flexible wire from ceiling rose to fan complete all as specified and as directed. Make BAJAJ , Speedster X BBD 1200 mm Ceramic White CF 2690 2410 or equivalent.
M&L Steel Tubes, 'Medium grade', 100 mm bore galvanised, with all fittings( i.e bends , elbows , tees , short pieces , connectors , backnuts , diminishing pieces , caps , plugs , unions , flange etc) incl welding laid in trenches/wall/floor complete all as specified and directed.
All as per item No 125 above but of size 80 mm bore
All as per item No 125 above but of size 50 mm bore
All as per item No 125 above but of size 40 mm bore
All as per item No 125 above but of size 25 mm bore
All as per item No 125 above but of size 20 mm bore
Supply, installing and testing of cast iron sluice valve, class PN 1.6, ISI marked conforming to IS-14846-2000 complete suitable for 100 bore pipe with flanged ends duly drilled, brass spindle, CI gate with brass rings and iron wheel head including dismantling unserviceable valve complete all as specified and directed.
All as per item No 131 above but of 80 mm bore
All as per item No 131 above but of 50 mm bore
S & F stop valve 15 mm bore cast copper alloy fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..
S & F stop valve 20 mm bore cast copper alloy , chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..
S & F stop valve 15 mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..
S & F stop valve 20 mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..
S & F stop valve 25 mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F stop valve 40 mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..
S & F Cutting of road 1.5 metre deep & 50- 60 cm wide for passing of GI pipe & making good to disturbed surface in PCC 1:1.5:3 type A-2 complete all as specified and directed.
S & F Cutting cast iron pipes of 150 mm bore in any position & inserting new Tee , / Teducer / branch connection complete all as specified and directed.
S & F Cutting cast iron pipes of 100 mm bore in any position & inserting new Tee , / Teducer / branch connection complete all as specified and directed.
S & F Cutting cast iron pipes of 80 mm bore in any position & inserting new Tee , / Teducer / branch connection complete all as specified and directed.
Material and labour for valve pit of size 1000 x 1000 x 1000 mm internal dimensions including all allied works such as plastering 15 mm thick in cement mortar 1:4, brick work built in cement mortar 1:4 with sub class B brick, PCC coping with 1:3:6 type C2 using 20 mm graded aggregate, including welding of MS angle and sheets as required for whole valve pit and painting , complete all as specified and directed.
Material and labour for valve pit of size 900 x 900 x 900 mm internal dimensions including all allied works such as plastering 15 mm thick in cement mortar 1:4, brick work built in cement mortar 1:4 with sub class B brick, PCC coping with 1:3:6 type C2 using 20 mm graded aggregate, including welding of MS angle and sheets as required for whole valve pit and painting , complete all as specified and directed.
Material and labour for valve pit of size 600 x 600 x 600 mm internal dimensions including all allied works such as plastering 15 mm thick in cement mortar 1:4, brick work built in cement mortar 1:4 with sub class B brick, PCC coping with 1:3:6 type C2 using 20 mm graded aggregate, including welding of MS angle and sheets as required for whole valve pit and painting , complete all as specified and directed.
Supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note:- Thickness of sand cushion after punning down will be measured and paid separately.
S & L brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' bricks laid in trenches flat complete all as specified and directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strips or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 16 sqmm 2 core, complete all as specified and directed.
M/S CJ CONSTRUCTIONS
BHARTI CONSTRUCTIONS
SUNIL AND CO
Mahajan Auto Traders
M/s Khajuria Construction Co.
Kalsi Engineers and contractors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .