GE/BAS-61/2022-23 REPAIR TO FENCING FOOTPATH GATES SECURITY WALL AND DRAINS AT JANGLOT UNDER GE BASOLI.

Amount

M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastred surfaces then applying two coats cement base paint on walls over a coat of white wash complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC 1:4:8 type D-2 75mm thick using (40mm graded crushed stone Agg) as in sub base finished even and smooth complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L machine pressed precast colour concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 Grade with grey cement and no pigment complete all as specified and directed

M&L machine pressed precast colour concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness , M-40 Grade with grey cement and no pigment complete all as specified and directed

M&L Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15mm thick screed bed of 1:4 cement mortar including 75mm thick cementco concrete type D-2 1:4:8 (40mm graded agg) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed

M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 10cm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 including 75mm thick cementco concrete type D-2 1:4:8 (40mm graded agg) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed

M&L for walling of random rubble masonary, uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed

All as per item No.10 above, but except stone complete all as specified and directed

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

All as per Item no 12 above but except bricks complete all as specified and directed

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

All as per Item no 11 above but except bricks complete all as specified and directed

M & L Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement and preparation of newly plastered or unplastered surfaces and applying two coats of white wash complete all as specified and directed

M&L for Raised pointing to random rubble walling uncoursed in CM (1:3) complete all as specified and directed

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains including Demolition of un-reinforced cement concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (12.50 mm graded aggregate) as in coping,plinth band ,bed block including rounded or chamfered angle as directed including necessary formwork etc including Demolition of un-reinforced cement concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level) complete all as specified and directed

M&L precast cement concrete Type B-1,1:2:4 (20 mm graded agg ) set in cement mortar 1:4 as in manhole covers including Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

S&F MS TMT bars 10mm dia & over cut to length bent to shape required all as specified as in reinforcement complete all as specified and directed

Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 Cu m, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in as in foundation and mass concrete work complete all as specified and directed

S&F Posts & struts of MS angle iron in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc flat iron filletsfillet(for securing wire mesh)) including all necessary drilling bolting or riveting etc complete all as specified and directed

M&L painting the surfaces of steel any description over 10cm in width or girth, with two coats of synthetic enamel paint over a coat of red oxide incl preparation of new steel surface complete all as specified and directed

M&L preparation of old painted steel surfaces of any description not otherwise specified over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint complete all as specified and directed

Supply and fix for Mild steel galvanised chain link of mesh size 50mmx50mm and thickness of line wire 3.80mm dia including fixing with straining bolt, binding wire etc including dismantling fencing wire mesh, any type complete all as specified and directed.

M&L for MS round bars 12mm dia for strengthening of chain link complete all as specified and directed

S&F of mild steel screw bolts with hexagonal or square heads at one end and screwed the other end or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm and n.exc 10 cm complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Fe410-W(Gde-E-250) complete all as specified and directed.

S & F of Bands, straps,supports or stays for rainwater, ventailing pipes, including bolts, if required hooks,heavy, for large gates, hook and pintle hinges; large hasps and stables; chains;hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165 complete all as specified and directed.

M & L for surfaces of any description, n.exc 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide incl preparation of new steel surface when unconnected with other painting or when painted in a different tint. complete all as specified and directed.

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

M & L 4mm dia galvanised steel wire, 125x125mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed..

M&L Boulder filling dry, handpacked tightly, as in wire crate apron bunds (Wire crate measured separately complete all as specified and directed..

S&F Punched Tape Concertina Coil (Including spike and handle) with 56 loops and dia 600mm, Max covered length 8 R, having a core wire of high carbon spring steel of high tensile strenght. The punched tape and copre wire (2.5+ 0.35mm dia) shall be heavy galvanized (IS-730) (wire-275GSM & strip 200 GSM) to provided protection against out door exposure. The punched tape shall mechanically crimped over the core wire and thn formed into a coil at various parts of the periphery of the coil. The width of strip as 19mm and spacing of blades 24.00 + 5% Kgs without paking material and coil lenght 8 mtr (Maximum) when opened up each coil would with bituminzed hessain cloth for providing protective packing etc. complete all as specified and directed.

M&L for concrete bed to drain pipesfor 300mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.

M&L for Reinforced concrete pipes 300mm dia, class NP3 with one collar per length of pipe laid and jointed on concrete bed, complete including testing etc all . (concrete bed shall be measured and paid for separately) complete all as specified and directed..

M&L for concrete bed to drain pipesfor 450mm bore pipes. including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.

M&L for Reinforced concrete pipes 450mm dia, class NP3 with one collar per length of pipe laid and jointed on concrete bed, complete including testing etc all (concrete bed shall be measured and paid for separately) complete all as specified and directed.

KHOSLA ENGINEERS BUILDERS

Amrik Construction co

Standard engineers

Ms Dalip Kumar and Co.

yash paul gupta

M/S YASH PAUL RAINA AND CO

Ms International Engineers