8242 SPECIAL REPAIR AT LION GATE SECURITY OFFICE BUILDING NO P-131 P-131A AND MUSTER GATE P-225 AT NAVAL DOCKYARD MUMBAI UNDER AGE B/R-I UNDER GE (NW) KUNJALI AND PROVISION OF FLOOR TILE AND FALSE CEILING IN CERTAIN ROOMS OF MAST BUILDING

Amount

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including irrection and dismantling of scaffolding to carrying out works up to 1 to 4 storeys buildings complete.

M & L rendering 10 mm thick in CM (1:3) on ceilling (the ceiling height shall be inculded upto top slab of the bldg).

M & L rendering 15 mm thick in CM (1:4) on external surface of wall incl WPC @ 3% by weight of cement finished even and smooth complete including irrection and dismantling of scaffolding to carrying out works up to 1 to 4 storeys buildings complete.

M&L for one coat of Hydrolock by brush without dilution water proofing course over the finished surface complete all as specified and as directed by Engr-in-Charge.

Supply only water profing compound @ 3 % by weight of cment complete all as specified.

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

M&L for rendering 15 mm thick pre polymer modified ready mixed cement based plaster in two coats 10 mm thick base coat and 5 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior damaged and concrete/masonary surfaces complete all as specified and directed.

M&L for applying 1mm thick one coat wall care putty on walls / ceilings etc complete all as specified and as directed.

M&L for applying 2mm thick one coat wall care putty on walls / ceilings etc complete all as specified and as directed.

M&L for preparation of new platered wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof including including irrection and dismantling of scaffolding to carrying out works up to 1 to 4 storeys buildings complete.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces including necessary scaffolding complete all as specified and directed.

M/L for preparation of new plastered surfaces of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified & directed by Engr-in-Charge.

M&L for preparation of old surfaces of of wall any description & applying one coats of acrylic (antifungal) exterior grade paint @ 1.67 lit/10 Sqm over and including priming coat @ 2.20kg/10 Sqm) on wall/roof up to 1 to 4 storeys buildings complete.

M&L for preparation of old wall surfaces of any description & applying one coat of oil bound distemper paint on wall/roof including necessary scaffolding complete all as specified and directed

Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 20 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth upto top of the scaffolding for carring out external facework of walls all as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain/design steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & and direected.

M & L for 1.5 mm thick galvanised steel sheet as in facia of roof, window chajja and Valley gutters fixed with rivets or other suitable arrangements over MS brackets in any shape/design as required profile with desired slope, including cutting holes, make design etc complete all as specified and as directed by Engr-in-Charge.

S&F 2mm fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with L -type or J-type or cranked hook in lieu of screw as in roof, wall etc complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 E-165 complete all as specified and directed by EIC.

Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Supply and fix structural steel framed works such as angle, channel etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed.

Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment.

M&L for preparation of new steel surfaces exc 10cm width of girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs upto 2nd floor floor complete all as specified and as directed

Taking up or down 15mm bore steel tubing connection including cleaning for refixing or removing etc complete.

Taking up or down 20mm bore steel tubing connection including cleaning for refixing or removing etc complete.

M&L for supply, lay, connect and test GI Tubing, 15mm dia medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed by EIC.

M&L for supply, lay, connect and test GI Tubing, 20mm dia medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed by EIC.

(a) Ditto item as above but laying only 15mm dia medium grade GI pipes

(a) Ditto item as above but laying only 20mm dia medium grade GI pipes

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for PCC 100mm thick type D-2 (1:4:8) using 40mm graded aggregate as in sub base all as specified and as directed.

M&L for PCC 100mm thick type C-2 (1:3:6) using 40mm graded aggregate as in sub base all as specified and as directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for coloured glazed ceramic tiles in vertical surface area of tiles n exc 0.18 Sqm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

Same as per item above but in skirting/ verticla surface including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Same as per item above but in skirting/ verticla surface including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing, skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

M&L for bewax mirror polishing on marble/granite/kota stone/stone work/Mosaic tile where ever required to give high gloss finish complete

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.

M&L for Pressed steel frames of size 125mm x 65mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed complete all as specified and as directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 40mm thick flush shutter solid core construction, with black board core and decorative particle board core both faces, commercial type complete all as specified and as directed by EIC.

S &F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in and fitted to chowkats complete all as specified and as directed.

S&F Factory made solid prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing (Colour and texture shall be as directed by GE/EIC).

S&F factory made prelam (single side) PVC Door Frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in openingcomplete all as per specification and as directed by EIC.

S&F 250 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F in repair 250 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F in repair 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F 100 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F in repairs 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F in repairs 100 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 100 mm of extruded section and fixed.

S&F in repairs aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F in repairs aluminium anodized barrel tower bolts 100 mm of extruded section and fixed.

S&F butt hinges 100 mm Stainless steel hinges medium weight.

S&F butt hinges 75 mm Stainless steel hinges medium weight.

S&F in repairs butt hinges 100 mm Stainless steel hinges medium weight.

S&F in repairs butt hinges 75 mm Stainless steel hinges medium weight.

S&F for 140mm long floor door stopper of aluminium alloy body and tonge, anodised with hand drawn steel spring fixed in floor complete all as specified and as directed.

S&F Rim latch of 100mm with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed complete bal as specified and as directed.

S&F for MS Mortice lock, vertical type, size 100 mm 4 lever lock complete all as specified.

S&F Door closer hydraulically regulated, designation No. 3,universal type, extruded aluminium body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repairs Door closer hydraulically regulated, designation No. 3,universal type, extruded aluminium body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wiren staple complete all as specified & as directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F in repair 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work.

Ditto all as ser Iten No 36 above but 9mm thick. All as specified and directed.

S&F I n repair roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories complete all as specified and as directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed

M & L for Anodised aluminium snap grid frame work for false ceiling of grid size 600X600 mm with Hangers 2-4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long fixing with cement fiber board of size 595 mm x 595mmX4mm etc complete all as specified all as specified. (Make : Everest or equvalent as approved by GE)

M&L for POP false ceiling using 600 x 900 x 9-10 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.

Demolition of Stone slabs and granite/ tiles / Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed. (The place of disposal shall be find out by contractor)

M & L for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for providing edge moulding to 18-20mm thick grenite incl machine polishing to edge to give high glossy finish etc complete.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F 160mm dia bore PVC (SWR) bends any radius complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed

M& L Bitumen membrane 3 mm thick laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per Sqm in floors /sunken slab using gas torch method complete all as specified and as directed

M&L Apply evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface complete all as specified and as directed

M&L for nominal mixed cement concrete 1: 7:12 with graded coarse aggregate complete all as specified and as directed

M/L PCC 1:3:6 type C-2, 100 mm thick as in sub base for sunken slab/floor complete all as specified mixed with WPC 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed . (WPC shall be measured and paid separately).

M&L for 20 mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for sunken slab/floor complete all as specified and as directed ( liquid water proofing Compound are measure separately ).

S & F 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold APC cladding etc including removal of old pan patti of wooden . (Note:- Colour/ Pattern of ACP sheet shall be given by GE).

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F 12mm toughened glass for door, shutter, partition, shelves, etc with and including fitting and fixture such as glass handles, latches, SS studes, fitting for doors pivot etc complete all as specified and as directed.

S & F of 0.5 Inch Golden Chrome Stainless Steel Mirror Strip PVD Coated for Decoration, Furniture, Highlighters, Multiple Uses complete all as specified and as directed by Engr-in-Charge.

M&L for PVC tiles / sheets, laminated plain or wooden coloured,marble mosaic or mottled finish 1.50-2mm thick, laid with approved adhessive in floors complete all as sepcfied and as directed by Engr-in-Charge.

M&L for carefully removing the wooden plank of any thickness and dimenssion etc and scrapping, cleaning of multiple layers of white wash enamel paint, distemper, oil paint, algae, etc. from underside of wooden ceiling/ planks gently with care to keep old designs intact using approved brand paint removers and replaced with first class well seasoned chemically treated Teak Wood as per tradional wooden plank of any dimenssion as per requirement and of 18-20mm thick joinery of mebers and fixed in position with the help of holdfasts/ traditional holdfast/ handmade nails etc. Items inclusive of carving/ engraving of patterns on wooden planks and wherever missing or damaged and finished with primer and red oxide of appropriate shade or polish including all leads, lifts and carriage up to all heights. Item also includes anti termite treatment of wood before fixing in poisiton, coating/ paitning of section of embedded timber coming into contact with masonasry. Item to include 18-20 well seasoned teak wood planks, glued, wedged as per the existing original design and pattern/ or design including all necessary fitting/ hardware like screws, nails,metal spikes ,ornamented nails ,metal patterns of flower, metal ribets, cost iron nails and as per decorative features of the same design, size and weight, etc . Item to also include making all the mouldings and design of plank etc and finish with primer and red oxide including scaffolding as approved by the Engineer Incharge. Items to include green cloth covering/ barricating.

S&F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed as fixed in repairs.

S&F for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed as fixed in repairs.

S&F in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

S&F in repair for oval shaped coloured vitreous china WHB table top fancy type of overall size 595 x 380 mm, cat No 7751 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe, swan neck pillar tap etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr includingrounding edges etc com cutting nitches rounding edges etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished and vertically supported by 02 No 35 mm thcik complete all as specified and directed by Engr-in-Charge.

S&F in repair fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.

S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed.

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, fixed as in repairs complete all as specified and directed.

S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white (flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

S&F Vitreous china premium/ 1st quality wash down water closet wall hung/ mounted on floor EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified as in repairs complete all as specified and directed.

S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F in repair brass Chromiun Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

S&F toilet paper holder of brass cromium plated or stainless steel flat recessed type fixed in repairs complete all as specified and directed.

S&F in repair fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs complete all as specified and directed.

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to 15 mm bore pipe etc complete all as specified and directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

S&F in repairs stop valves/gate valve, 40mm bore dia, cast copper alloy with crutch or butterfly handle, any type in any position all as specified and directed by Eingineer in Charge.

S&F in repairs 25mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dsimentling battens for tiles, shingles etc, of any size including tilting fillets complete all as specified and as directed by EIC.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

M&L for Preparation of floor PCC, interlocking tiles, chequered tiles, any floor tiles over a one coat of Glossy floor paint (indigo paints) on floor surfaces of any description and applying one coat of indigo paints all as specified and directed.

Removing debris exc. 1.50 Km but n exc. 20 Km and depositing where directed, in soil outside MD land.

M &L roughening surfaces of old concrete surfaces by picking, sweepng cleaning and washing down with water to remove dust etc including taking down old tarfelt.

M&L for PCC 1:2:4 type BO ( using 12.5mm graded aggregate) cement concrete as leveling course of roof surfaces and coping etc.

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured) ceiliing board / tiles deep panel as per sample.

M & L complete removal of existing treatment of old surfaces of walls and applying distempering with ist quality acrylic distemper(ready mixed) having voc content less than 50 gms/litre of approved manufacturer of required shade and colour over a coat of alkali resistant primer complete as per manufacturers specification two or more coats complete all as specified and directed.

M & L for point wiring in repair with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:-

One light point controlled by one switch

One ceiling fan/wall fan/exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5A flush type switch socket point on same board

M&L for point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC casing caping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 1 x15 Amp switch socket point for independent board complete including required size and numbers moduler box and cover plate all as specified & directed.

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, ISI marked, not less than 25mm PVC casing caping with all accessories fixed on wall/ceiling/truss with PVC non metallic ISI make terminal boxes fixed on wall as per site requirement/metallic terminal boxes concealed in wall suitable for modular accessoriesi with cover plate and frame and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including required number and size of modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.

M&L for submain wiring in repair with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing caping not less than 25mm width ISI marked with all accessories like PVC elbow, etc fixed on wall complete including connecting up all as specified and directed.

S&F in repair LED recess mounted type fitting 36W 2'x2' CRCA LED Slim panel with recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified by Engr-in-Charge.Make : shakti cat part No. SZSBLMX040 or equivalent

Supply and fix in repair switch modular type 1 way 6 Amps 1 module 240 volts flush type

Supply and fix in repair switch modular type 1 way 16 Amps 1 module 240 volts flush type

Supply and fix in repair modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fix in repair modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed by Engr-in-Charge.

Supply and fixing of remote operated BLDC ceiling fan, BEE 5 star 1200mm sweep complete all as specified and directed.

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and directed.

S & F in repair MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and directed.

S & F in repair MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed.

Sachin santosh dalvi (BID ID -3470088)

sai construction (BID ID -3480763)