Creation of 25kVA 63kVA Sub Stations along with HT LT Network at Below mentioned sites under B2V programme

Amount

Creation of 25 kVA Sub-Station for providing of power supply to PHC Overa

Carriage, Installation, testing & commisioing of 25 KVA (11/0.433 KV) 3-Phase dully Oil Filled Distribution Transformer (Level-2)

Supply, Erection, testing & commissioning of S.T Pole 9mtr Long SP-33 with base plate & cap for HT. Strictly as per REC standards

Supply, Erection, testing & commissioning of S.T Pole 8mtr Long SP-15 with base plate & cap for LT. Strictly as per REC standards

Supply, Laying, stringing, tensioning & binding of ACSR 30mmsq (Weasel) Conductor

Supply, Laying, stringing, tensioning & binding of ACSR 50mmsq (Rabbit) Conductor

Providing & fixing of ISMC 75x40x6mm Channel iron cross arms for x-mer frame- 8 Nos @16.5 kg each 8' long including Nuts & Bolts

Supplying and erection of MS Channel “V’ cross-arm (75 x 40x6mm) with MS Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole [email protected] kg each

Supplying and fixing of pole Earthing Complete by GI Pipe 40 mm 2.5 mtr long through GI Strip(25x3 mm) to each HT pole including supply and welding of GI channel 70x40x150 mm on pole for earth connection

Painting of poles with one coat of red oxide and two coats of Aluminium paint as per Standards. This also includes numbering of ploes with paint, submission of Pre and Post Execution photographs duly anthenticated by AEE concrened.

Supply,fixing, testing & commissioning of 11KV GO Set, AB Switch as per IS Standards

Supply,fixing, testing & commissioning of 11KV DO Fuse Set as per IS Standards

Supply,fixing, testing & commissioning of 11KV LA Set Gap less as per IS Standards

Supply,fixing, testing & commissioning of 11KV Pin Insulators with GI pins complete.

Providing & fixing of Thimbles Suitable for 25KVA DT as per standards

Providing & fixing of Soldress Clamp for 25KVA DT as per standards

Providing & fixing of LT Shackles Insulator with GI mukhi clamps including nuts & bolts

Supply, laying of 50 mmsq Single Core XLPE, FRLS unaroumed Cable

Supplying and fixing of 3 No. sub station earthing by GI Pipe 40 mm, 2.5 mtr long through GI Strip of 50X6 mm for neutral earthing and 25X3 mm for 2 transformer body earth, 1 no. LA Earth and 1 no. GO handle earth. (Note: For LA Earth 1 pipe shall have to be kept separate)

Cement concreting of poles in 1:2:4 mix 0.45 cums/pole- as per REC Standards

Providing, Fixing of nuts and bolts for fixing of x-arms and other accessories.

Supply, installation, testing & commissioing of LT Distribution Box for 25KVA DTR with MCCB for incommer and SFU's for outgoing ckts.

Providing, Installation, testing & commisioning of 3-Phase 4-wire Prodigy Meter (40 -200A), including suitable stand/clamps using channels and Canopy to protect the same from Adverse Weather Conditions (Complete)

Supply, laying of 25mmsq 3.5 core XLPE insulated, alm. conductor armoured cable of standard make

Creation of 63 kVA Sub-Station along with HT/LT network at Kinoo Overa

Carriage, Installation, testing & commisioing of 63 KVA (11/0.433 KV) 3-Phase dully Oil Filled Distribution Transformer (Level-2)

Supply, Erection, testing & commissioning of S.T Pole 9mtr Long SP-33 with base plate & cap for HT. Strictly as per REC standards

Supply, Erection, testing & commissioning of S.T Pole 8mtr Long SP-15 with base plate & cap for LT. Strictly as per REC standards

Supply, Laying, stringing, tensioning & binding of ACSR 30mmsq (Weasel) Conductor

Supply, Laying, stringing, tensioning & binding of ACSR 50mmsq (Rabbit) Conductor

Providing & fixing of ISMC 75x40x6mm Channel iron cross arms for x-mer frame- 8 Nos @16.5 kg each 8' long including Nuts & Bolts

Supplying and erection of MS Channel “V’ cross-arm (75 x 40x6mm) with MS Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole [email protected] kg each

Supplying and fixing of pole Earthing Complete by GI Pipe 40 mm 2.5 mtr long through GI Strip(25x3 mm) to each HT pole including supply and welding of GI channel 70x40x150 mm on pole for earth connection

Painting of poles with one coat of red oxide and two coats of Aluminium paint as per Standards. This also includes numbering of ploes with paint, submission of Pre and Post Execution photographs duly anthenticated by AEE concrened.

Supply,fixing, testing & commissioning of 11KV GO Set, AB Switch as per IS Standards

Supply,fixing, testing & commissioning of 11KV DO Fuse Set as per IS Standards

Supply,fixing, testing & commissioning of 11KV LA Set Gap less as per IS Standards

Supply,fixing, testing & commissioning of 11KV Pin Insulators with GI pins complete.

Providing & fixing of Thimbles Suitable for 63KVA DT as per standards

Providing & fixing of Soldress Clamp for 63KVA DT as per standards

Providing & fixing of LT Shackles Insulator with GI mukhi clamps including nuts & bolts

Supply, laying of 120 mmsq Single Core XLPE, FRLS unaroumed Cable

Supplying and fixing of 3 No. sub station earthing by GI Pipe 40 mm, 2.5 mtr long through GI Strip of 50X6 mm for neutral earthing and 25X3 mm for 2 transformer body earth, 1 no. LA Earth and 1 no. GO handle earth. (Note: For LA Earth 1 pipe shall have to be kept separate)

Cement concreting of poles in 1:2:4 mix 0.45 cums/pole- as per REC Standards

Providing, Fixing of nuts and bolts for fixing of x-arms and other accessories.

Supply, installation, testing & commissioing of LT Distribution Box for 63KVA DTR with MCCB for incommer and SFU's for outgoing ckts.

M/S HEEVAN ENGINEERS

AY ENGINEERS