Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹16.4 L
EMD Value
₹33,000
Closing Date
26 Aug 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER ED AWANTIPORA
OFFICE OF THE EXECUTIVE ENGINEER ED AWANTIPORA
Augmentation/Repairs of Divisional Work-shop at Awantipora
2022_PDD_182964_1
EDA-43 OF 2022-23
Open Tender
Civil Works
Turn-key
45 days
Awantipora
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EXECUTIVE ENGINEER ED AWANTIPORA
₹33,000
OFFICE OF THE EXECUTIVE ENGINEER ED AWANTIPORA
2 Sept 2022
6 Aug 2022
27 Aug 2022
6 Aug 2022
26 Aug 2022
6 Aug 2022
6 Aug 2022 - 20 Aug 2022
16 Aug 2022
Amount
Clearance of Site by way of draging of Transformers,Drums ,conductor, ladders and other materials within the premises of Divisional Office,Removal of Chequered / Iron plate from existing work shop and Removal of existing /damaged rolling shutter and its connected brick walls masonary including clearing of Bricks from cement and other material and placing of servicable material and disposal of unservicable material as directed by the Engineer Incharge by way of engaging of labours.
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundation,drains,pipes,cables etc(not exceeding 1.5 m in width) and for shafts, wells, cesspits and like not exceeding 10 square metre on plan, including dressing of sides and ramming of bottoms, lift upto 1.5m,getting out of excavated earth and disposal of surplus earth as directed , within a lead of 50 metres. (All kinds of soil)
Providing and laying of stone soling, laid dry, placing in a position, tightly hand packed including all carriages upto the site of work complete.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering all work upto plinth level in (1:4:8) (1 cement: 4 coarse sand : 4 graded stone aggregate 40 mm nominal size.
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand).
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate crushed 20mm nominal size.
Dry random rubble masonary with hard stone in foundation and plinth (Quarry stone ) with bond stone
Providing and laying in position specified grade of reinforcement cement concrete(1:2:4) including curing but excluding the cost of centring ,shuttering and reinforcement, All work upto plinth level.
Steel reinforcement for RCC work including straightening , cutting , bending , placing in position and binding all complete upto plinth level. Mild steel and medium tensile steel bars.
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material with 50 mtrs lead as per directions of Engineer Incharge in cement mortar.
Demolishing R.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 mtrs lead as per directions of Engineer Incharge .
Centring and shuttering including strutting, proping etc and removal of formwork for suspended floors , roofs , landings, balconies and access platforms.
Providing of 12 mm cement plaster in cement mortar 1:6 (1 cement : 6 fine sand)
Providing of 6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand)
Providing of Neat cement punning
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in positionwith hold fast lugs or with dash fasteners of required diameter and length (hold fast lugs or with dash fasteners shall be paid for separately) Ist class kail wood.
Providing and fixing of panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with but hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of Engineer Incharge (35 mm thick Ist class Kail wood)
Providing 40 ×5 mm flat iron hold fasts 40 cm long including fixing to frames with 10 mm diameter bolts,nuts and wooden plugs and embedding in cement concrete blocks 30×10×15 cm 1:3:6 mix with stone aggregate 20 mm nominal size
Providing and fixing of glass panes with putty and glazing clips in steel doors, windows , clerestory windows all complete (4.0mm thick glass panes )
Providing and applying white based putty of specified thickness of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick
Providing and fixing of panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Prelaminated particle board with decorative lamination on both sides Grade I , type IS :14587 marked.
Providing and fixing of Ist quality ceramic glazed wall tiles conforming to IS :15622(thickness to be specified by the manufacturer, of approved make, in all colours, shades except burgundy in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including painting in white cement mixed with pigment of matching shade complete.
Providing and fixing of Aluminium work for doors, windows , ventilators and Partitions with extrodded built up standard tubular sections/appropriate Z sections of approved make confirming to IS:733 and IS:1285, fixed with dash fasteners of required diameter and size including necessary , filling up of gaps at junctions i.e., at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc . Aluminium sections shall be smooth, rust free , straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling , CP brass/stainless steel screws, all complete as per architectural drawings and directions of Engineer Incharge ( glazing, panelling and dash fasteners to be paid for separately )
Providing and fixing glazing in aluminium door, windows , ventilators, shutter and partitions etc with EPDM rubber /neoprene gasket etc complete as per the architectural drawing and the directions of Engineer Incharge ( Cost of Aluminium snap beading shall be paid in basic item with float glass panes of 5.0 mm thickness (Weight not less than 12.50 kg/m2.
Providing and fixing white vitrous china water closet squarnting pan(Indian type along with S or P trap including low level cisters 10 ltrs of standard make and quality with all necessary fittings for connections (Nissan P attern with pan size 580 × 440 mm
Providing and fixing of wash basin with pedestral of approved make and made (Hindware or equivalent), Ivory/white colour with all necessary fittings and fixtures like CP brass waste, 32 mm diameter waste pipe (White vitrous china , basin size 630 × 400 mm( Cera, Jaguar,SS or equivalent) including all cost and carriage upto site of work complete .
Providing and fixing of mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including all carriages upto site complete
Providing and fixing of water heating geysers of approved make and made (Venus, Jaguar or equivalent make with all necessary fittings and fixtures complete 50 litres capacity. 2 no's
Providing and fixing of G.I Pipes ISI marked with all fittings including all costs of carriage of material involved involved upto site of work including cutting chases and making good of same ( 15 mm G.I pipe (B) class)
Providing and fixing of PVC pipes and fittings with all necessary fittings including all leads, lifts, cost and carriage of material upto site of work complete job(make Prince, supreme or equivalent) a) 100 mm dia pipes "Type B "
b)75 mm dia pipes "Type B"
c) 1'-6" × 1'-6" Main hole cover( PVC)
d) 1'-0"× 1'-0" Main hole cover (PVC)
e) 50 mm PVC pipe "Type B"
f) 50 mm cowl
g) P or S trap 100 mm inlet and outlet
h) Floor trap 100 mm inlet and 75 mm outlet
i) Door bend /Door junction
j)75 mm door junction/Door bend
k)100 × 75 mm reducer
l) providing and fixing of pvc connections of approved size /superior quality.
m) providing and placing on terrace (all floor) level pvc water storage tank with fittings complete(2× 1000 ltrs)
n)15 mm G.I union
Providing and fixing of C P fittings of approved brands and manufacture ( as per directions of Engineer Incharge at site) (Cera , Jaguar , SS or equivalent) a) providing and fixing of angle valve 15mm
b) providing and fixing of 15mm brass bib cocks
c) providing and fixing of wall mixer
d) providing and fixing of basin mixer
e) Providing and fixing of shower
f) providing and fixing of towel rod
g) Providing and fixing of soap case
h) Providing and fixing of steel greatings
i) Providing and fixing of stop cock 15 mm
J) providing and fixing of ball valve ( brass)
Providing and fixing of Anodised Aluminium door / window fillings and fixtures of approved brand and standard manufacture including all leads, lifts and carriage complete a) T - Bolts 125 mm
b) Handles 125 mm
c) L- drops/Locking bolts 300 mm with link lock or equivalent
Providing and fixing in position collapsable steel shutters with vertical channels 20 × 10 × 2 mm and braced with flat iron diagonals 20× 5 mm size, with top and bottom rail of T - Iron 40 × 40 × 6 mm with 40 mm dia, steel pulleys , complete with bolts, nuts, locking arrangement, stoppers, handles including applying a printing cost of approved steel primer and painting two or more coats complete.
Supplying and fixing rolling shutters of approved make, made of required size M.S laths, interlocked together through their entire length and joined together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS 4454 part I and MS top cover of required thickness for rolling shutter.
Providing and fixing of ball bearing for rolling shutters.
Extra for mechanical device chain crank operation for operating rolling shutters (exceeding 16.80 m2 in area)
Steel work welded in built up sections/framed work, including cutting hoisting, fixing in position and applying a priming cost of approved steel primer using structural steel etc as required in stringers, treads, landings etc of stair cases, including use of chequered plate wherever required, all complete
Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing, staircase railing and similar works , including applying priming coat of approved steel primer
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.
Applying Priming coat with ready mixed pink or grey primer of approved brand and manufacture ( hard or soft wash including painting with synthetic enamel paint of approved brand and manufacture to give an even shade (Two or more coats on new work)
Carriage of material from nearest source upto site of work by means of mechanical transport(sand and Bajri)
Carriage of Stones 5kms
Carriage of Bricks -45 kms
MOHAMMAD MAQBOOL WANI
M/S HILAL CONSTRUCTIONS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .