Work

Amount

Part- A, Supply

Single tention fitting suitable for ACSR Moose

Single tention fitting suitable for ACSR Panther

Single Suspension fitting suitable for ACSR Panther

Single Suspension fitting suitable for ACSR Moose

PG Clamp Suitable for Panther to Panther

PG Clamp Suitable for Moose to Moose

PG Clamp Suitable for Moose to Panther

PG Clamp Suitable for Zebra to Moose

Bus post clamp Suitable for Twin Panther

Bus post clamp Suitable for Moose

70 KN antifog disc insulator

Portable AFF mechanical foam type fire Extinguisher complete with initial charge hose pipe and all other accessories and fitting as per IS 1024 trolley /Wheel mounted 45/50 liter capacity

Fire extinguisher carbon dioxide as per IS specn No 2878/1986 and as per technical specification

40 mm MS Rod for main earthmat

Tower Accessories

Bolt, With Nut & Washer 16x35

Bolt, With Nut & Washer 16x40

Bolt, With Nut & Washer 16x45

Bolt, With Nut & Washer 16x50

Bolt, With Nut & Washer 16x55

Bolt, With Nut & Washer 16x60

Number Plate

Danger Plate

Phase Plate Set

Pipe Type Earthing Material for Tower

Hardware Suitable For ACSR Panther

Single Tension Fitting

Repair Sleeve

Vibration Damper

Hardware & Accessories For Gs Earthwaire 7/3.66 Mm

Tension Clamp

Vibration Damper

Flexable Copper Bond

120 KN Composite Silicon Rubber Insulator String

Part -B, Work (Erection of 63 MVA T/F)

Shifting upto 20 M of main tank of 63 MVA transformer from unloading place to plinth including turning of tank , if required. All T&P and all other associated works fo completion of job satisfactory.

Additinal shifting of 5 meter a part therof 20 meter of 63 MVA 132/33 Transfomeer @5 meter per job.

Complete erection of 63MVA, 132/33 KV Transformer by erection of radiators, conservator tank, all bushing, their turrets connecting all pipe lines, cooling fans, motor drive mechanism of tap charger, RTCC panels, oil pumps and associated oil pipe lines etc to complete the job satisfactorily including first filling of oil and topping up of T/F oil (Not circulation) in tank radiators, oil pipe lines, conservator tank etc, and attending the oil leakage, if any and all other associated works for satisfactory completion of job. Crane and T&P shall be provided by the contractor

Centrifusing of fresh transformer oil and filling of balance oil into the transformer with machine ,operator and to provide final BDV & PPM testing results. Machine and operator will be provided by the contractor.

Laying of following size control cable in the cable trench from control relay/ RTCC panel to Transformer marshalling/ Drive Mechanism as per cable schedule, its Saddling as every 75 mm distance with MS saddles of size of size 25x3mm , including carriage of cable drums from store to laying site and all other associated work to complete the job satisfactory.

2C x 2.5 sq.mm

4C x 2.5 sq.mm

6C x 2.5 sq.mm

10C x 2.5 sq.mm

Termination of different size (10x2.5mm², 06x2.5 mm², 4x2.5mm² and 2x2.5mm²) of above lead control cable.

2C x 2.5 sq.mm

4C x 2.5 sq.mm

6C x 2.5 sq.mm

10C x 2.5 sq.mm

Construction of Delta earthing by piercing 3 meter long electrodes in earth and then connecting them with each other by 75x10 mm M.S flat and connecting to neutal bushing ,the same with main earthmate at 2 places as required, excluding the cost of M.S. Bar and M.S. flat to be provided by the department free of cost. and all other associated work to completion the job satisfactory.

Earthing of 63 MVA, 132/33 KV Transformer including MB, OLTC, RTCC etc with M.S. flat to be provided by the Contractor with 50x6 mm and 75x10 mm M.S. flat and connecting the same with main earthmat at two places as required including painting of M.S. strip of one coat red oxide primer and two coat green enamel colour above ground surface. and all other associated work to completion the job satisfactory.

Part -C, Work (Erection of 63 MVA T/F Bay)

Collection , loading and carriage of subsation structure (20MT) from EFU NAINI Pryagraj to 132 KV S/S Zamania and after carriage unloading it at 132 KV S/S Zamania.

Loding of S/S Structure (20 MT) at EFU Naini .

Carriage of S/S Structure(20 MT ) from EFU Naini to 132 KV S/S Zamania (Approx distance 300 KM) .

Unloading of S/S Structure (20 MT) at 132 S/S Zamania.

Erection of Main and auxiliary structure by shifting of structure from store to work site as per relevant drawing and practices using Nut - Bolt and spring washers .The material shall be supplied by department free of cost but the contractor has to manage T & P and all other associated work to complete the job satisfactory.

Stringing of 33 KV Main Bus Bar (R.Y& B Phase) with ACSR single Moose conductor including cutting, bending and clamping fitting of tension clamp with all associated accessories. Hoisting of insulator string after shifting of material from store to switchyard at site and all other associated work to complete the work satisfactory. The Bus will be of 36 Mtr. and section will be connected with clamp and jumper. The work also include the connection of this bnus with existing 33 KV Bus.

Stringing of 132 KV Jack Bus bar ( R, Y & B phase ) with ACSR single Panther conductor including cutting, bending and clamping fitting of tension clamp with all associated accessories, hoisting of insulator string after shifting of material from store to work site and all other associated work to complete the work satisfactory. The Bus will be in three sections including each section of 36 Mtr and each section will be connected with clamp and jumper. The work also include the connection of this jack bus with existing 132 KV BUS.

Erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material from store to work site includig all other associated work to complete the job Satisfactory.

145 KV BSI

145 KV SF6 ,CB

Junction box for 145 KV CT

Junction box for 145 KV LSI & BSI

Junction box for 36 KV CT

36 KV VCB

36 KV BSI

Junction box for 36 KV BSI

Rely&control panel for 63MVA POWER TRANSFORMER.

Erection of ABT Energy Metering panel with main and check rack

Jumpering of transformer and associated equipments using single/double panther/zebra/moose conductor from bus bar to isolators,CB,CT,LA, etc on both sides required.

Laying of follwing size control cables from control & relay panels to various equipment junction boxes etc in switchyard as per cable schedule, its binding at every 1.5 mtr. distance with M.S. saddle including carriage of cable from store to work site and shiftingback to store and all associated works to complete the job satisfactorily .

2C x 2.5 sq. mm

4C x 2.5 sq. mm

6C x 2.5 sq. mm

10C x 2.5 sq. mm

Termination of above cable as per cable schedule including making necessary holes in gland plates of boxes where ever required including Supply and fixing of cable glands of approxinmate size and to provide ferrules and nos. for each core of cable and its termination with all the other associated works to complete the Job.

2C x 2.5 sq. mm

4C x 2.5 sq. mm

6C x 2.5 sq. mm

10C x 2.5 sq. mm

Delta earthing of 120 KV LA consisting of 03 Nos 3 meter long electodes its placing inside the ground and connecting all three electrodes with 75x10 mm MS flat and connecting the same with LA at two place required including cost of M.S strip excluding cost of M.S round bar

Earthing of Main & Auxiliary structure and various type equipments (CT, PT, CB, LA, LSI, BSI etc ) by M.S strips by cutting to proper size, digging of earth from ground level to earthmat then proper welding as per drawing and leveling earth. Painting of M.S Strips of one coat red oxide primer and two coat with green colour and all associated work to complete the job satisfactory . M.S Flat will be provided by the contractor.

Laying of 40 mm dia. Round bar 700 mm below ground level includind cutting tightening welding painting excavation of trench by back filling and all other associeted work to complete the work satisfactory as per technical specification excluding cost of 40 mm dia. round bar

Fabrication of 3 meter long electrode with 40 mm MS round bar having 150 mm conical shape and then its piercing vertically inside the ground with top 700 mm below ground level and its welding exluding cost of 40 mm dia. Round bar

Part-D (Construction of 0.3 Km Jack Bus through Transmission Tower)

Survey & Profiling

Check Survey

Cost Of Excavation 132 Kv Of Foundation (Normel And Pile) Pits Including All Earth Work Backfilling Ramming And Leveling etc.

Setting Stub Including All Foundation Work But Execluding The Cost Of Concreting And Excavation Of following Tower.

03 NOS DC+0

Installation Of Steel Re-Inforcement Bars In Rcc Foundation Including Cost Of Steel Re-Inforcement Bars Cutting,Bending ,Placing Binding etc For Dc+0 Tower

Cost Of Concreting For Normel Open Castfoundation For Dc+0 Including Cost Of Cement,Sand,Stone Aggregates Dewatering Viberating Forming Shoring And Shutring And Curing But Excluding Cost And Installation Of Re-Inforcement Steel Bars With 1:2:4 Mix Concreting

Erection Of Superstructure 132 Kv Of Dc+0 Type Of Tower And Their Extension Including Transporting Tower Part From Store To Site And All Work Above Ground Level Excluding Hoisting Of Insulator But Including Fitting Of Danger Plate No. Plate,Phase Plate Fixing And Punching Of The Bolts.

Tack Welding Of All The Bolt Upto 5 Meter With Application Of Zine Rich Aluminium Paint.

Laying Tensioning,Stringing Clamping Jointing etc Of ACSR Panther Conductor Per Phase Including Hoisting Of Insulator Fitting Of All Accessories Hardware And Accessories etc Of Conductor all Three Phases.

Laying Tensioning,Stringing Clamping Jointing etc Of 7/3.66 Gs Earthwire

Grounding Work Pipe Type Earthing Of Tower Including Coke And Salt and other associated work

Transportation of Tower parts material from 220 KV S/S Bhadaura to 132 KV S/S Zamania approx distance 30 Km. The work encludes loading of material at 220 KV S/S Bhadaura & unloading & stacking at 132 KV S/S Zamania and other associated work to complete the Job satisfactory.

M/s S.S. Refregeration

Meena Elect & Engg. Works