8227 MAINT/REPAIR/REPLMNT TO INT WIRING, SWITCHES, SOCKETS, LIGHT FITTINGS AND FIXTURES, OTHER MISC ELECT WORK IN THE AREA OF FAMILY QTRS, CH COMPLEX, RF LINE, CMDC, 4 RMC, MI LINE, LH ROAD, SAIBABA COMPLEX, CHSC AND CONNECTED AREA UNDER AGE EM S PUN

Amount

NOTE FOR ITEM NO 2 TO 148 APPENDED BELOW :- (a) One FGM / Electrician (Min) to be present daily to attend complaint and carry out other works as per CA. (b) If found absent three times the min wages will be deducted for the days of absentees. (c) Attending complaints and carry out other repair works as per CA has to carry out in COVID Hospital at CH(SC), AICTS, ALC where FGM / Electrician with helper has to go inside COVID WARD where COVID POSITIVE patient are treated, if complaints are not attended in that case penalty will be 5 times the minimum wages of FGM / Electrician will be deducted till complaints are not attended and decision of GE will be final & binding. (d) All protection like PPE Kit and other safety measures will be provided by Hospital Authority. (e) Necessary insurance coverage should be taken for their staff by the bidder. (f) All rates for the above are deemed to be included in Sch 'A'(BOQ) items

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, regulators etc) for taking credit and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M & L for Point wiring with colour coding as per IS, with multistranded copper conductor 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- Cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable Make:- Finolex/Polycab/ Havell's drawn through in and including heavy duty PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, incl making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete etc heavy duty ISI marked, with GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches of Make- Legrand or equivalent in Honeywell / Phillips including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light point controlled by one way switch 5 Amps

One fan point/ exhaust fan point controlled by one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one, bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 03 above but using 2.5 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, ISI marked, with GI sunken /surface boxes with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches of Make- Legrand or equivalent Honey well / phillips, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch 5 Amps

One fan point/ exhaust fan point controlled by one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 5.00 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, ISI marked, with mild steel sunken boxes with earth dolly duly, covered with laminated hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One light point controlled by TWO WAY switches 5 Amps all as directed.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 7.00 above but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire one 6 pin 15 amps socket outlet on independent board all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- FLEXIBLE WIRING CABLE conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable with tripple layers protection Make:- Finolex/polycab/ Havell's drawn through in and including heavy duty , PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, incl making good of disturbed surface and applying two coats of white / colour wash on disturbed surface to match the existing surfaces, with mild steel sunken boxes with earth dolly duly, covered with hylem sheet cover 3 mm thick, suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 9.00 above but using 2.5 sqmm copper conductor with 2.5 sqmm earth wire one 6 pin 15 amps socket outlet on independent board complete all as specified and as directed.

S & F for Modular Switch piano flush type, single pole, one way, and 6 Amp single module complete all as specified and as directed.

S & F for Modular Switch piano flush type, single pole, one way, and 16 Amp single module complete all as specified and as directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, 2 module piano flush type complete all as specified and as directed.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 16 Amp and 3 pin,6 Amp, 2 module piano flush type complete all as specified and as directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified and as directed.

S&F Bell Push flush type 5 Amps, 240 volts complete all as specified and as directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed (Make :- Anchor/Havells /VINAY )

M & L for Fix lamp holder insulated body with back plate PVC/Polycarbonate type with cord grip cap, angular type fixed on wall incl 9 watt LED lamp complete all as specified and directed. (Make Anchor/Havells /VINAY- Make of LED Lamp Bajaj/Wipro/Havells)

S & F for Ceiling rose, surface Bakelite suitable ISI marked complete all as specified and as directed. (Make :- Anchor / Havells /VINAY )

S & F for Switch piano flush type, single pole, one way, and 5 Amp complete all as specified and as directed. (Make :- Anchor / Havells /VINAY)

S & F for Switch piano flush type, single pole, 5 Amps TWO WAY SWITCHES complete all as specified and as directed. (Make :- Anchor / Havells /VINAY)

M&L for switch piano flush type, 15 Amps single pole one way fixed and connect as per existing complete all as specified and directed. (Make :- SSK/Anchor/Havells)

S & F Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified. (Make :- Anchor / Havells /VINAY)

M&L for socket 5/15 Amp multipurpose and with, 15 Amps single pole one way complete all as specified. and directed. (Make :- Anchor / Havells / VINAY)

S&F in repair IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed / surface on wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand cat no-5077 50/ ABB/L&T. (Note :- MCCB 100 Amps 4 pole 25 KA as incomer will be measured seprately in relevant item.)

S&F in repair IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed / surface on wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - Legrand cat no-5077 52 / ABB / L&T) (Note- MCCB 100 Amps 4 pole 25 KA as incomer will be measured seprately in relevant item.)

S&F in repair IP-54, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 12 way, 36 modules suitable for accommodating 160 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed / surface on wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - Legrand cat no-5077 53 / ABB/L&T) (Note :- MCCB 160 Amps 4 pole 25 KA as incomer will be measured seprately in relevant item.)

S&F in repair, IP-43 ,MCB DB 4 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make- Legrand cat no-5076 10 or equivalent in ABB/L&T)

S&F in repair, IP-43 ,MCB DB 8 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make- Legrand Cat No.- 5076 11 or equivalent in ABB/L&T)

S&F in repair, IP-43 ,MCB DB 12 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make- Legrand cat no-5076 12 or equivalent in ABB/L&T)

Supply & Fix in repair MCCB size -1 Enclosure for DU 100 H/ DU 125 H/ DU 100 D/DU 125D/ DNO suitable for accommodating upto 125 Amps MCCB,3/ 4 pole, 415 volts as per site requirement .and fixing in existing LT panel/wall or as directed by opening panel front and back side and extending existing size bus bar of the panel or as per site requirement, connecting with nut bolts, providing sleaves on bus bar and fixing new mccb and connecting out going LT cable with new mccb enclosure with lugs, ferrules complete connection all as directed by Engr in charge. (Note- MCCB will be measured seprately in relevant item.) (Make-L&T cat no-CM90996OOOO or equivalent in ABB/Legrand)

Supply & Fix in repair MCCB size -II Enclosure for DU 250 C/ DU 250/ / DN1 suitable for accommodating upto 250 Amps MCCB,3/ 4 pole, 415 volts as per site requirement .and fixing in existing LT panel/wall or as directed by opening panel front and back side and extending existing size bus bar of the panel or as per site requirement, connecting with nut bolts, providing sleaves on bus bar and fixing new mccb and connecting out going LT cable with new mccb enclosure with lugs, ferrules complete connection all as directed (Note - MCCB will be measured seprately in relevant item) (Make -L&T cat no-CM91003OOOO or equivalent in ABB/Legrand)

Supply and Fix in repair MCCB 63 Amps, 18 KA, 4 Pole, 415V, model conforming to L&T cat no- CM90518OOKO or equivalent in Legrand/ABB complete all as specified and as directed.

Supply and Fix in repair MCCB 100 Amps, 18 KA, 4 Pole, 415V, model conforming to L&T Cat Part No - CM90642OOLO or equivalent in Legrand/ABB complete all as specified and as directed.

Supply and Fix in repair MCCB 125 Amps, 18 KA, 4 Pole, 415V, model conforming to L&T Cat Part No. CM90642OOMO or equivalent in Legrand/ABB complete all as specified and as directed.

Supply and Fix in repair MCCB 160 Amps, 25 KA, 4 Pole, 415V, model conforming to L&T Cat Part No. CM90642OONO or equivalent in Legrand/ABB complete all as specified and as directed.

Supply and Fix in repair MCCB 200 Amps, 25 KA, 4 Pole, 415V, model conforming to L&T Cat Part No- CM90642OOPO or equivalent in Legrand/ABB complete all as specified and as directed.

Supply and Fix in repair MCCB 250 Amps, 25 KA, 4 Pole, 415V, model conforming to L&T Cat Part No- CM90642OOPO or equivalent in Legrand/ABB complete all as specified and as directed.

Supply and Fix in repair MCCB 400 Amps, 36 KA, 4 Pole, 415V, model conforming to L&T cat Part No. CM98403OOROOG or equivalent in Legrand/ABB complete all as specified and as directed.

S&F in repair, Metal plug and socket -2 pin and earth plug and socket with 20Amps MCB SP concealed / surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - Legrand or equivalent make in L&T / ABB)

S&F in repair,Metal plug triple pole and earth enclosure with a three pin and earth plug with socket and MCB TP 20 Amp concealed / surface in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as directed. (Make - Legrand or equivalent make in L&T / ABB)

S&F in replacement,Metal plug-2 pin suitable 20 Amps complete all as specified and as directed. (Make - Legrand or equivalent make in L&T / ABB)

S&F in replacement MCB SP 6-32 Amps,10KA,'C' series complete all as specified and as directed. (Make - Legrand or equivalent make in L&T / ABB)

S&F in replacement MCB SPN 20-40 Amps, 10KA, 240V, 'C' series complete all as specified and as directed. (Make- L&T/ Legrand / HPL (O safe))

S&F in replacement MCB TP 40/63 Amps,10KA, 415 V, 'C' series complete all as specified and as directed. (Make- L&T/ Legrand / HPL (O safe))

S&F in replacement MCB TPN 63 Amps, 10KA, 415V, 'C' series complete all as specified and as directed. (Make- L&T/ Legrand / HPL (O safe))

Supply & fix LED tube light 18/20 Watt 4 fit long, T-8 rectrofit tube including taking down tube light and choke from any type fitting and making all connection complete all as specified and directed. (Make :- Bajaj /philips/Wipro)

M & L for LED pannel Recess mounted -2'x2' - 36 watts light fitting with full glow is a beautifully designed luminaire which is bound to delight the occupants with refreshing and comfortable experience through its pure form and glare free light complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fitting conforming to cat part make- Crompton cat no- LCTLRN-36-FO-CDL or equivalent of BAJAJ / WIPRO/ Phillips

M & L for LED pannel Recess mounted -2'x2' - 36 watts light fitting with heat exchanger unit complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fitting conforming to Cat Part Make - Crompton Cat No- LCPL-36-CDL(2X2) or equivalent of BAJAJ /Philips/WIPRO

M & L for LED pannel Recess mounted -2'x2' - 50 watts light fitting glare free uniform illumination with longer life and less maintenance complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fitting conforming to Cat Part Make - Crompton Cat No- LCTLRN-50-FO-CDL or equivalent of BAJAJ /Philips/WIPRO

Supply and fix LED batten neptune silver tube light fitting complete with all fitting and fixing accessories, 4 Feet, 1X20Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution conforming to CAT Part No. HPL - HLPT51820PCGCW or equivelent in of Wipro / Philips complete including taking down any type fitting complete all as specified and as directed.

Supply & fix LED batten 5 watt CDL PLASTIC tube light fitting complete all as specified and directed including taking down existing holder/FITTING complete all as specified and as directed. (Make :- BAJAJ-830209 or equivelent in WIPRO / Philips)

Supply & fix LED batten 10 watt CDL PLASTIC tube light fitting complete all as specified and directed including taking down existing holder/FITTING complete all as specified and as directed. (Make :- BAJAJ-830206 or equivelent in WIPRO / Philips)

Supply and fix CDL IVORA LED 25 WATT tube light fitting complete with all fitting and fixing accessories, 4 Feet, 1X25 Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution conforming to CAT Part No. BAJAJ-830258 or equivelent in of Wipro / Philips complete including taking down any type fitting all as specified and as directed.

Supply and replace unsv LED indoor driver for LED fitting 20 to 35 Watts of the existing make including connection complete all as specified and directed

Supply and replace unsv LED indoor driver for LED pannel Recess mounted -2'x2' - 36 watts of the existing make including connection complete all as specified and directed

Supply and replace unsv LED indoor driver for LED pannel Recess mounted -2'x2' - 50 watts of the existing make including connection complete all as specified and directed

Supply and replace unsv LED out door driver for LED fitting 25 to 50 Watts of the existing make including connection complete all as specified and directed

Supply and replace unsv LED out door driver for LED fitting 60 to 75 Watts of the existing make including connection complete all as specified and directed

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size with 10 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 2x6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable (Make:- Finolex/Polycab/ Havell's) drawing into and including rigid non metallic PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc in any type of wall , making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note:- One meter of conduit along with 4x10 sq mm wire and 2x6 sq mm earth shall be measured as one unit length.)

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size with 06 Sqmm nominal cross sectional area,multi core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, with two single core, PVC insulated, copper conductor cable (Make:- Finolex / Polycab / Havell's) drawing into and including rigid non metallic PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc in any type of wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :- One meter of conduit along with 4 X 6 sq mm wire and 2x 4 sq mm earth shall be measured as one unit length.)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 6 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable (Make:- Finolex/Polycab/ Havell's) drawing into and including rigid non metallic PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc in any type of wall , making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note:-One meter of conduit along with 2x6 sq mm wire and one 4 sq mm earth shall be measured as one unit length.)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 04 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable (Make:- Finolex/Polycab/ Havell's) drawing into and including rigid non metallic heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked of suitable size concealed in wall etc and connected to common earth dolly including all cutting / chases etc in any type of wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :-One meter of conduit along with 2x4 sq mm wire and one 2.5 sq mm earth shall be measured as one unit length.)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 04 Sqmm nominal cross sectional area,1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable (Make:- Finolex/Polycab/ Havell's) and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :- One meter of PVC casing caping along with 2x4 sq mm wire and one 2.5 sq mm earth shall be measured as one unit length)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size with 06 Sqmm nominal cross sectional area, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable Make:- Finolex/ Polycab/ Havell's and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :-One meter of PVC casing caping along with 2x6 sq mm wire and one 4 sq mm earth shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 2x4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable (Make:- Finolex/Polycab/ Havell's) and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note:-One meter of PVC casing caping along with 4x6 sq mm wire and 2x 4 sq mm earth shall be measured as one unit length.)

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size with 10 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 2x6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable (Make:- Finolex/Polycab/ Havell's) and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note:-One meter of PVC casing caping along with 4x10 sq mm wire and 2x 6 sq mm earth shall be measured as one unit length.)

M&L in replacement of switch piano flush type, 15 Amps single pole one way fixed and connect as per existing complete all as specified and directed. (Make :- SSK/Anchor/Havells)

S&F in repair of switch piano flush type, 5 Amps single pole one way fixed and connecting to existing board complete all as specified and directed. (Make :- SSK/Anchor/Havells)

M&L in replacement of socket outlet flush type 2 in 1, 3 pin , 5 and 15 Amps fixed and connect in existing bdcomplete all as specified. and directed. (Make :- SSK/Anchor/Havells)

M&L in replacement of socket outlet 5 pin and 5 amps flush type incl fixed and connect in existing board complete all as specified and directed. (Make :- SSK / Anchor / Havells)

M&L in replacement of switch socket combination flush type 2 in 1, 3 pin , 5 and 15 Amps fixed and connect in existing board complete all as specified and directed. (Make :- SSK/Anchor/Havells)

M&L in replacement of switch socket combination flush type 2 in 1, 3 pin , 5 Amps fixed and connect in existing board complete all as specified and directed. (Make :- SSK/Anchor/Havells)

Supply and fixing ceiling fan regulator, electronic,flush type, rotary steps, hum free, AC, 230 volts, 100 watts, complete all as specified & directed. (Make: -Havells / Anchor / Indo Asian)

Supply & fix in repair Chock electronic Ballast SLIM TYPE36/40 watt commercial type fixed in existing fitting complete all as specified and as directed. (Make :- Bajaj / WIPRO /Philips)

S & F in repair Modular Switch piano flush type, single pole, one way, and 6 Amp single module complete all as specified and as directed. (Make - Legrand (Myrius) or other make as approved by GE)

S & F in repair Modular Switch piano flush type, single pole, one way, and 16 Amp single module complete all as specified and as directed. [Make - Legrand (Myrius) of other make existing approved by GE]

S & F in repair Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed. (Make - Legrand (Myrius) of other make existing approved by GE)

S & F in repair Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed. (Make - Legrand (Myrius) of other make existing approved by GE)

S & F in repair modular cover plate with frame 2 MOUDLES complete all as specified and as directed. (Make - Legrand (Myrius) of other make existing approved by GE)

S & F in repair modular cover plate with frame 3 MOUDLES complete all as specified and as directed. (Make - Legrand (Myrius) of other make existing approved by GE)

S & F in repair modular cover plate with frame 4 MOUDLES complete all as specified and as directed. (Make - Legrand (Myrius) of other make existing approved by GE)

Supply & fix in repair existing fan Condenser 2.5 mfd 230 Volts complete all as specified and as directed. (Make :- Havells / Epcos/Tibcon /Siemens)

Supply & fix in repair existing fan Condenser 4 mfd 230 Volts complete all as specified and as directed. (Make :- Havells / Epcos/Tibcon /Siemens)

S&F in replacement of burnt out and unserviceable fan motor assembly complete including double bearing, copper winding with metal plate top & bottom side suitable for 1200 mm sweep of any existing make and at any location complete all as specified and as directed (Make :-Havells / Usha or equivalent in existing make)

M & L Attending emergent complaints i.e No light/Cable fault of any size & type / earth leakage/ short circuit / neutral break mains / substations / internal circuits of existing system of main building / block, making continious electric supply including carrying out minor repairs etc as required to Make- the system in order / functional including replacing fuse wire , copper cable , copper thimbles ,glands , earthing wire, cable jointing complete all as specified and directed. [Note : (i) Rate of Fuse wire, copper cable, copper thimbles, glands, earthing wire are deemed to be considered in this item. (ii) Minimum One electrician to be present daily during the contract period, for attending emergency complaint and other repair/replacement of item in CA, if found absent Rs-1600 will be deducted daily]

Supply and fix in replace anchor bolt & nut 8 mm dia of the geyser for fixing on wall in a suitable way and making good the distrubed area complete all as specified and directed

Supply and fix in replace PVC box with 06 Amps switch and socket 06 Amps duly fixed on wall all as specified and directed

Supply and fix in replace PVC box with 16 Amps switch and socket 06 / 16 Amps duly fixed on wall all as specified and directed

Supply only Self adhesive PVC electrical Insulation tape 7 mtr long, ISI mark with superior quality complete all as specified and as directed.

Supply and replace hylum sheet as existed in the Switch board for 4 nos switch/socket/regulator by making provision for fixing switches and socket all as specified and directed. (Note- Switch / socket / regulator will be measured seperately as per site requirement.)

Supply and replace hylum sheet as existed in the Switch board for 6 nos switch/socket/regulator by making provision for fixing switches and socket all as specified and directed. (Note - Switch / socket / regulator will be measured seprately as per site requirement.)

Supply and replace hylum sheet as existed in the Switch board for 8 nos switch/socket/regulator by making provision for fixing switches and socket all as specified and directed. (Note - Switch / Socket / Regulator will be measured seprately as per site requirement.)

Taking down following fans, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations complete all as specified and as directed :- (Note :- Spares like bearing, terminal connector, gun metal bush, PVC cable shall be measured and paid seperately as supply only)

Ceiling fans of any size

Exhaust fan of any size

Wall mounting fan of any size

Supply only the following spare parts :-

Bearing 6200 to 6203 ZZ Make - SKF/NBL

Conductor Terminal 3 way Bakelite

Brass gun metal bushing suitable of size 1200/1400mm sweep ceiling fan.

Supply and Fix in replacement canopy for ceiling fans (Set of two) complete all as specified and as directed.

Supply and Fix in replacement MS clamp with rubber reel, nuts, bolts, split pin etc. suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed.

Supply and replace fan blade (set of 3) suitable for 1200 mm of existing Make complete all as specified and as directed.

M&L for replacement of burnt winding of following fans, rewinding complete with super enamelled copper wire of same guage and weight, replacement of insulation paper, varnishing, heating up and testing complete including taking down and refixing the fan at positions to the satisfaction complete all as specified and as directed.

Ceiling fan 1200/1400mm sweep working on 230 volts AC supply

Exhaust fan upto 300/450 mm sweep working on 230 volts AC supply

Wall mounting fan of any 230/450 mm size,working on 230 volts AC supply

S&F in replacement down rod for ceiling fan made out of GI pipe medium grade 15mm dia with fan clamps incl drilling, cutting, threading etc complete all as directed for ceiling fan 1200/1400 sweep of following sizes:-

2 ft long

3 ft long

4 ft long

6 ft long

Taking down following capapcity of geysers carrying to workshop for leakage repairing, servicing, cleaning etc, replacement of thermostat, heating element, indicator lamp and thermal cut out incl fixing of PVC cable, sheathed, three core with stranded copper conductor of size 2.5 sqmm and refixing the geysers at location for :- (Note :- Heating element, geyser tank, thermostat, indicator lamp & thermal cutout etc shall be measured and paid separately as supply only)

25 liters capacity

50 liters capacity

Supply only heating element 2 KW, 230 volt round/ triangular in shape ISI marked complete all as specified and as directed.

Supply only heating element 1.5 KW, 230 volt round/ triangular in shape ISI marked complete all as specified and as directed.

Supply only steel tank for 25 Ltrs geyser capacity as per existing geyser complete all as specified and as directed.

Supply only steel tank for 50 Ltrs geyser capacity as per existing geyser complete all as specified and as directed.

Supply only Indicating lamp (red/green/yellow) complete suitable for 25/50/100 liters capacity geyser complete all as specified and as directed.

Supply only thermostat ISI marked complete suitable for 25/50 liters capacity geyser complete all as specified and as directed.

M&L for spray painting of old surface of ceiling fan/Exhaust fan/pedestal fan/Geyser any size & any description by applying one coat of synthetic enamel paint complete including taking down and refixing and writing MES Nos and preparation of surfaces all as specified and directed .

Supply and replace single core FRLS cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and fix in replace single core FRLS cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and fix in replace single core FRLS cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core FRLS cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core FRLS cable PVC insulated and unsheathed multistranded copper conductor of size 10 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core FRLS cable PVC insulated and unsheathed multistranded copper conductor of size 16 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and Fix in replacement CFL 3pin 36 watts complete all as specified and as directed.

Supply and Fix in replacement CFL electronic choke 36 watts complete all as specified and as directed.

Supply and fixing in repairs PVC fresh air fan 300mm sweep complete all as specified and as directed. (Make :- Bajaj/cromptan/Havells)

Supply and fixing in repairs PVC fresh air fan 250mm sweep complete all as specified and as directed. (Make :- Bajaj/cromptan/Havells)

S&F in repairs PVC flexible three core copper 23/0.0076 size complete all as specified and directed.

Supply & fix in replacement 15A plug top and connection complete all as specified and as directed [Make :- Anchor / Havells / Legrand or of equivalent make]

Supply & fix PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 45/60cm long for cold water as per requirement complete all as specified and as directed

Supply & fix PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 45/60cm long for hot water as per requirement complete all as specified and as directed

S&F in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket/switch to geyser complete all as specified and as directed.

S&F in repairs cable PVC insulated 3 core 4.0 Sqmm with stranded copper conductor 1100V grade complete all as specified and as directed

Supply and fix in replace multi core flexible copper conductor PVC insulated and sheathed cables 2core 0.75 Sqmm 1100Volt all as specified and directed

Supply and fix in replace flat twin 4 Sq mm with alumanium conductor multi strand black cable as per IS 694-1990 complete all as specified and directed

Supply and fix replace flat twin 6 Sq mm with alumanium conductor multi strand black cable as per IS 694-1990 complete all as specified and directed

Supply and fix in repair on load Change over switch 200 Amps TPN with enclosure and proper size of lugs, nuts bolts and washers for proper connections all as specified and directed. (Make :- L&T / Legrand / ABB)

Supply and Fix in repair LED security light 25 Watts in aluminium housing with glass cover with suitable dia GI pipe bend to shape existing including taking down existing any type security light all as specifed and directed [Make -Crompton cat no - LSTS-25-CDL OR equivalent in / Bajaj / WIPRO]

Supply and Fix in repair LED security light 30 Watts in aluminium housing with glass cover with suitable dia GI pipe bend to shape existing including taking down existing any type security light all as specifed and directed [Make -Crompton cat no - LSTS-30-CDL OR equivalent in / Bajaj / WIPRO]

Supply and Fix post top lantern 60 Watts including taking down existing any type of fitting complete all as specified and as directed. [Make - Crompton cat no - LPTO-60-CDL or equivalent in Bajaj / Wipro ]

Supply and Fix post top lantern 35/40 Watts including taking down existing any type of fitting [Make - Crompton cat no - LPTO-40-CDL or equivalent in Bajaj / Wipro ]

Supply and Fix in repair Rectro fit 4 pin LED with direct plug and play complete all as specified and as directed. [Make - JAGUAR (Dazzle) equivalent in Havells / Bajaj / Syska / WIPRO]

Supply and Fix LED Flood light 40 Watts including taking down existing any type of fitting [Make - SYSKA/ WIPRO/ HPL / JAGUAR / Havells]

M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'galvanised iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanised iron or steel earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. (NOTE :-GI strip and GI pipe 40mm bore medium grade for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.)

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 mm galvanized iron strip, complete all as specified and directed.

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and directed.

Supply and replace door by taking shut down of electric supply panel and disconnecting cable connection and providing new cable lugs/ferrules and welding of door out door type LT panel made out of CRCA sheet 3.15 mm thick bend on side to match the existing door and painting complete panel inside & out side duly powder coated with existing colour and providing new hinges three nos duly welded to suit any size /shape of pannel all as specified and as directed.

Repairing and rewinding of Constant Voltage transformer of OT light of any size, replacing the rectifier, Relays, Rotary switch, Fuse, indicator, including internal copper wiring and lugs etc complete all as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in the following type of strata complete all as specified and as directed.

Soft/Loose soil

Hard/ Dense soil

Soft/disintegrated Rock

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removal of excavated material [soil] to a distance not Exc 50m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and as directed.

M&L for Reinforced concrete pipes for cable cover, class NP2 100 mm dia ,half round (02 Nos for top & bottom) complete all as specified and as directed.

Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 35 Sqmm 3.5 core complete all as specified and as directed.

Supply,laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 25 Sqmm 3.5 core complete all as specified and as directed.

Supply,laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 10 Sqmm 2 core complete all as specified and as directed.

Gauri Associates

M/S - SUJIT ELECTRICALS