Construction of new minor bridge and approach road near Nagwa Nala bridge situated at Km-30 of Lucknow-Mohan-Bangarma-Bilhaur road (SH-40)

Amount

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) (Excluding GST)

Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. (Pile diameter-1200 mm) (Excluding GST)

PCC Grade M15 Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications (Excluding GST)

Providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing (Excluding GST)

Cement concrete for reinforced concrete in pile cap complete as per drawing and Technical Specification RCC Grade M35. (Excluding GST)

Supplying, fitting and placing un-coated Mild steel reinforcement complete in foundation as per drawing and technical specification (Excluding GST)

R.C.C. grade M-35 Plain/reinforced cement concrete in substructure complete as per drawings and technical specifications (Excluding GST)

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications . (Excluding GST)

Furnishing and Placing Reinforced/Prestressed cement concrete in superstructure as per drawing and Technical Specifications RCC/PSC Grade M35/, Case-II Using Batching Plant, Transit Mixer and Concrete Pump (ii) For T-Beam & Slab Height up to 5.00m.(Excluding GST)

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications . (Excluding GST)

Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification (Excluding GST)

POT-PTFE Bearing. (Excluding GST) (i) Fixed POT @ 175 Tonne Capacity

Guided Sliding POT cum PTFE (Transverse Guided) @ 170 Tonne Capacity (Excluding GST)

Guided Sliding POT cum PTFE (Longitudional Guided) @ 175 Tonne Capacity (Excluding GST)

Free POT cum PTFE @ 170 Tonne Capacity (Excluding GST)

Furnishing and Placing Reinforced/Prestressed cement concrete in superstructure as per drawing and Technical Specifications RCC/PSC Grade M-40, Case-II Using Batching Plant, Transit Mixer and Concrete Pump For solid slab super-structure, 18-28% of (a+b+c) Height up to 5.00m (Excluding GST)

Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.) (Excluding GST)

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications(Excluding GST)

Drainage Spouts complete as per drawing and Technical Specifications (Excluding GST)

Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming to MORTH specification & as per details given in IRC 5 including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board etc as per approved drawing and at locations directed by the Engineer, all as specified (Area = 0.243 sqm/ Single face) (Excluding GST)

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.(Excluding GST)

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications (Excluding GST)

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification (Excluding GST)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.(Excluding GST)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications(Excluding GST)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification(Excluding GST)

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification (Excluding GST)

Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification(Excluding GST)

Lighting on Bridges (Providing and fixing lighting on bridges, mounted on steel hollow circular poles of standard specifications, 5 m high fixed on parapets with cement concrete, 20 m apart and fitted with sodium vapour lamp)(Excluding GST)

Sub Soil Investigation .(Excluding GST)

Carrying out investigation and detailed design and drawing of RCC minor bridge and comprising it’s all components substructure and Superstructure as per IRC code guidelines and direction of load classification “A” including collection of all relevant basic data and submission of GAD, detailed drawing and design. Including Vetting and Proof Checking of structural design and drawing from Govt. Engineering College.(Excluding GST)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2..(Excluding GST)

Construction of subgrade and earthen shoulder with approved material obtained from borrowpits with all lifts and leads,spreading,grading to required slope and compected to meet requirement of table 300-2.(Excluding GST)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.(Excluding GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Excluding GST)

Providing, laying, spreading and compacting graded stone aggregate, Cement @ 1% Bitumen Emulsion @ 3.5% to wet mix macadam specification including premixing the material with water & cement at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Excluding GST)

Providing and applying tack coat with bitumen VG_10 using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.(Excluding GST)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects..(Excluding GST)

Providing and laying bituminious concrete with 100 TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder as per job mix, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects.(Excluding GST)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification.(Excluding GST)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications(Excluding GST)

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m..(Excluding GST)

PCC Grade M25 using batching plant transit mixer & Concrete pump(Excluding GST)

Brick work with common burnt clay (non modular) bricks of class - 150 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) as per S.I. No. 6.1.1.(Excluding GST)

Plastering with cement mortar (1:4) 12 mm thick on brickwork in substructure/superstracutre as per technical specification clauses 613.4 & 1204(Excluding GST)

PCC Grade M20 using batching plant & Concrete pump(Excluding GST)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.(Excluding GST)

Laying brick soling on prepared sub-grade with brick on end edging according to lines,graded and cross-section shown on the drawing filling joints with sand and earth,spreading 25 mm thick layer of earth over brick soling,watering and rolling the same with three wheeled road roller 80-100 kN as per Technical Specification Clause 412.(Excluding GST)

M/S S.K. ENTERPRISES (BID ID -5057979)

Sai Infraconstruction Pvt. Ltd. (BID ID -4956708)

AK and AK SOIL ENTERPRISES PVT LTD (BID ID -4953758)

Suresh Kumar Singh (BID ID -4952329)

RAM SANEHI AND SONS (BID ID -4956766)

SIDDHARTH CONSTRUCTION (BID ID -4951831)

AM BUILDERS AND INFRASTRUCTURES PRIVATE LIMITED (BID ID -4956822)